ASUS ProArt GeForce RTX 4080 Super OC Edition Graphics Card User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your ASUS ProArt GeForce RTX 4080 Super OC Edition Graphics Card. Designed for creative professionals, this graphics card offers advanced performance for tasks such as 3D rendering, video editing, and graphic design.

Key features include:

• Powered by NVIDIA DLSS 3, Ada Lovelace architecture, and full ray tracing.
• 4th Generation Tensor Cores for up to 4x performance with DLSS 3.
• 3rd Generation RT Cores for enhanced ray tracing performance.
• OC mode: 2640 MHz / Default mode: 2610 MHz.
• Axial-tech fans for increased airflow.
• 2.5-slot design for improved compatibility and cooling.
• Dual Ball Fan Bearings for extended lifespan.
• Auto-Extreme automated manufacturing for reliability.
• GPU Tweak III Profile Connect for system optimization.

Image 1.1: ASUS ProArt GeForce RTX 4080 Super OC Edition Graphics Card and its retail packaging.

Image 1.2: Front view of the ASUS ProArt GeForce RTX 4080 Super Graphics Card.

2. Package Contents

Verify that all items are present in the package:

• PROART-RTX4080S-O16G Graphics card
• Collection card
• Speedset up Manual
• Adapter Cable
• PROART Graphics card holder
• ASUS Velcro Hook & Loop
• Thank you card

3. Specifications

Image 3.1: Overview of the NVIDIA Ada Lovelace Architecture, highlighting Streaming Multiprocessors, Tensor Cores, and RT Cores.

4. Setup

4.1 System Requirements

• PCI Express-compliant motherboard with one x16 graphics slot.
• Minimum 750W power supply unit (PSU) with appropriate PCIe power connectors.
• Operating System: Windows 10/11 64-bit or Linux 64-bit.
• At least 16GB of system memory recommended.
• Internet connection for driver downloads.

4.2 Physical Installation

1. Prepare Your System: Power off your computer and unplug all cables. Open the computer case.
2. Locate PCIe Slot: Identify an available PCI Express x16 slot on your motherboard. Remove any expansion slot covers that obstruct the installation.
3. Install the Graphics Card: Carefully align the graphics card with the PCIe slot and press it down firmly until it is securely seated. Ensure the retention clip on the PCIe slot locks into place.
4. Secure the Card: Use screws to secure the graphics card to the computer case's expansion slot bracket.
5. Connect Power Cables: Connect the required PCIe power cables from your power supply to the graphics card. The ASUS ProArt RTX 4080 Super typically requires a 12VHPWR connector or multiple 8-pin PCIe power connectors via an adapter. Ensure all connections are secure.
6. Close Case and Reconnect: Close your computer case, reconnect all peripherals, and power cables.

Image 4.1: Internal view of the graphics card, illustrating the PCB and cooling components.

4.3 Software Installation

1. Boot Your System: Power on your computer. If the display works, proceed to the next step. If not, refer to the Troubleshooting section.
2. Download Drivers: Visit the official ASUS support website or NVIDIA's website to download the latest graphics drivers for the GeForce RTX 4080 Super.
3. Install Drivers: Run the downloaded driver installer and follow the on-screen instructions. A system restart may be required after installation.
4. Install ASUS GPU Tweak III: Download and install the ASUS GPU Tweak III utility from the ASUS support website. This software allows for performance monitoring, overclocking, and fan control.

5. Operating

5.1 Basic Operation

Once drivers are installed, your graphics card will automatically handle graphics processing for your system. For optimal performance in applications and games, ensure your display is connected to one of the graphics card's output ports (HDMI or DisplayPort).

5.2 Performance Optimization with GPU Tweak III

The ASUS GPU Tweak III utility provides advanced control over your graphics card:

• Monitoring: View real-time information on GPU clock speed, memory clock speed, temperature, fan speed, and power consumption.
• Overclocking: Adjust GPU clock offsets and memory clock offsets to enhance performance. Exercise caution when overclocking to maintain system stability.
• Fan Control: Customize fan curves to balance cooling performance and noise levels.
• Profile Connect: Create and save custom profiles for different applications or usage scenarios, allowing for seamless optimization.

Image 5.1: Illustration of NVIDIA DLSS 3 technology, showing performance improvements.

Image 5.2: Visual comparison demonstrating the effects of Ray Tracing in a simulated environment.

6. Maintenance

6.1 Driver Updates

Regularly check for and install the latest graphics drivers from the official ASUS or NVIDIA website. Driver updates often include performance improvements, bug fixes, and support for new applications and games.

6.2 Cleaning

Dust accumulation can hinder cooling performance. Periodically clean your graphics card:

• Power off your computer and unplug it from the wall.
• Open the computer case.
• Use compressed air to gently blow dust from the fans and heatsink fins. Hold the fans to prevent them from spinning rapidly during cleaning.
• Ensure adequate ventilation within your computer case to minimize dust buildup.

Image 6.1: Close-up view of the Axial-tech fans on the ASUS ProArt Graphics Card.

7. Troubleshooting

If you encounter issues with your graphics card, refer to the following common problems and solutions:

8. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your product or visit the official ASUS support website.

ASUS Support Website: https://www.asus.com/support/

You can also find additional resources and product information on the ASUS store page: ASUS Store on Amazon