Relaxdays 4-Tier Metal Plant Stand with Wheels

Introduction

Thank you for choosing the Relaxdays 4-Tier Metal Plant Stand with Wheels. This manual provides essential information for the safe assembly, operation, and maintenance of your new plant stand. Please read these instructions carefully before use and retain them for future reference.

Safety Information

For your safety, please observe the following guidelines:

• Ensure all components are securely fastened before placing plants on the stand.
• Do not exceed the maximum load capacity of 5 kg per shelf.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use the locking brakes on the wheels when the stand is in a stationary position to prevent accidental movement.
• Avoid placing the stand on uneven surfaces to maintain stability.

Additional safety information may be available in the official safety document provided by the manufacturer. Please refer to the Safety Information (PDF) for more details.

Package Contents

Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Metal frame components (shelves, vertical supports)
• 4 wheels (2 with locking brakes)
• Assembly hardware (screws, nuts, wrench)
• Instruction manual

Setup and Assembly

Follow these steps to assemble your plant stand:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
2. Attach Wheels: Insert the four wheels into the designated holes at the bottom of the stand's base frame. Ensure two wheels with locking brakes are positioned on the same side for easier access. Tighten them securely using the provided wrench.
3. Assemble Frame: Connect the vertical support bars to the shelf panels using the provided screws and nuts. Follow the diagram to ensure correct orientation of the 4 tiers. Do not overtighten screws initially.
4. Secure All Connections: Once all frame components are in place, gradually tighten all screws until the stand is stable and firm. Avoid excessive force to prevent damage to the material.

Figure 1: Assembly diagram with dimensions (Height: 60.5 cm, Width: 61.5 cm, Depth: 26 cm).

Figure 2: Detail of a wheel with its locking brake.

Operating Instructions

This plant stand is designed for displaying plants and decorative items. Its mobile design allows for flexible placement.

• Placement: Position the plant stand in your desired location. It is suitable for indoor use in living rooms, bedrooms, or conservatories.
• Loading: Carefully place potted plants or decorations on the four tiers. Distribute weight evenly and ensure no single shelf exceeds 5 kg.
• Mobility: To move the stand, unlock the brakes on the wheels. Gently push or pull the stand to its new position.
• Stability: Once the stand is in its final position, engage the locking brakes on the wheels to prevent unintended movement and ensure stability.

Figure 3: The plant stand in use, showcasing its capacity for multiple plants.

Maintenance

Proper care will extend the life of your plant stand.

• Cleaning: Wipe the metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Wheel Care: Keep the wheels free of debris to ensure smooth movement.
• Indoor Use: This plant stand is designed for indoor use. Prolonged exposure to outdoor elements may cause rust or damage.

Troubleshooting

If you encounter any issues, refer to the following common solutions:

• Stand is wobbly: Ensure all screws are fully tightened. Check that the stand is placed on a level surface.
• Wheels not rolling smoothly: Check for debris (hair, dust) caught in the wheels. Clean as necessary. Ensure wheel brakes are disengaged.
• Wheels not locking: Verify that the brake levers are fully engaged. If a wheel is damaged, contact support for replacement options.
• Difficulty assembling: Review the assembly steps and diagrams carefully. Ensure components are oriented correctly. Do not force parts together.

Specifications

Warranty Information

Specific warranty details for this product are not available in the provided information. Please refer to your purchase receipt or contact the retailer for warranty terms and conditions.

Support

If you require further assistance or have questions not covered in this manual, please contact Relaxdays customer support through their official website or the retailer where the product was purchased.