1. Introduction
This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your ZJXDPBF Velvet Swivel Bar Stool. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
2. Product Overview
The ZJXDPBF Velvet Swivel Bar Stool is designed for comfort and durability, featuring a modern aesthetic suitable for various settings such as kitchen islands, bars, cafes, and home offices. Key features include:
- Material: Skin-friendly velvet fabric with high-density sponge cushioning for comfort and resistance to deformation.
- Design: Curved backrest and thick footrest for ergonomic support.
- Swivel Function: 360-degree rotation for versatile use.
- Stability: Four tapered metal legs and an enlarged base for enhanced stability.
- Floor Protection: Non-slip rubber ring under the base to prevent scratches and reduce noise.
Figure 2.1: The ZJXDPBF Velvet Swivel Bar Stool in black, showcasing its design with a curved backrest, cushioned seat, and metal legs with a footrest ring.
Figure 2.2: Illustration highlighting key features: 360-degree swivel capability, soft velvet fabric, high-resilience sponge cushioning, and a sturdy metal frame.
3. Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity of 150 kg (330 lbs).
- Avoid standing on the stool or using it as a ladder.
- Keep children away from the assembly area and ensure they do not play with small parts.
- Place the stool on a flat, stable surface to prevent tipping.
- Regularly check all screws and connections for tightness.
4. Package Contents
Verify that all parts are present before beginning assembly. The package should contain:
- 1 x ZJXDPBF Velvet Swivel Bar Stool (unassembled components)
- 1 x Assembly Hardware Kit (screws, washers, Allen wrench)
- 1 x Instruction Manual (this document)
5. Setup and Assembly
Assembly is required for this product. Please follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Seat to Base: Align the seat cushion with the top of the metal base frame. Secure it using the provided screws and Allen wrench. Do not overtighten initially.
- Attach Footrest Ring: Insert the footrest ring into the designated slots on the metal legs. Secure with screws.
- Tighten All Connections: Once all parts are loosely assembled, gradually tighten all screws until secure. Do not overtighten to avoid stripping threads.
- Final Check: Ensure the stool is stable and all connections are firm before use.
6. Operating Instructions
The ZJXDPBF Velvet Swivel Bar Stool is designed for straightforward use:
- Swivel Function: The seat can rotate 360 degrees. Simply turn the seat in the desired direction. Ensure there are no obstructions around the stool during rotation.
- Footrest: Utilize the integrated footrest ring for comfortable leg support while seated.
7. Maintenance
Proper care will extend the life and appearance of your bar stool:
- Velvet Fabric: Regularly vacuum the velvet upholstery with a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Avoid harsh chemicals or excessive moisture.
- Metal Frame: Wipe the metal legs and base with a soft, damp cloth. Dry immediately to prevent water spots or rust. Avoid abrasive cleaners.
- General: Periodically check and tighten all screws and connections to maintain stability.
Figure 7.1: A close-up view of the velvet fabric, illustrating its soft texture. This material requires gentle cleaning.
8. Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool feels wobbly | Loose screws or uneven floor | Check and tighten all assembly screws. Ensure the stool is on a flat, level surface. |
| Swivel mechanism is stiff | Lack of lubrication or debris | Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing movement. |
| Scratches on floor | Missing or damaged floor protectors | Ensure the rubber ring under the base is intact and properly seated. Replace if damaged. |
9. Specifications
Detailed product dimensions and capacity:
| Feature | Measurement |
|---|---|
| Stool Seat Height | 29.5 inches (75 cm) |
| Cushion Depth | 14.17 inches (36 cm) |
| Cushion Width | 14.17 inches (36 cm) |
| Backrest Height | 6.3 inches (16 cm) |
| Base Width (approx.) | 15.7 inches (40 cm) |
| Maximum Load Capacity | 150 kg (330 lbs) |
| Assembly Required | Yes |
Note: The ideal distance between the table and chair is 25-35 cm (approximately 9.8-13.8 inches).
Figure 9.1: Dimensional diagram of the bar stool, indicating seat height (76cm), backrest height (15cm), cushion width/depth (36cm), and base width (40cm), along with recommended table height for a 65cm seat height stool.
10. Support
For any concerns, questions, or assistance regarding your ZJXDPBF Velvet Swivel Bar Stool, please do not hesitate to contact us. We are committed to providing prompt support and look forward to assisting you.
Contact information for support is typically found on the product packaging or the retailer's website where the product was purchased.