Introduction
This manual provides essential information for the safe and efficient use of your Coleman SaluSpa Sicily 180 AirJet Inflatable Hot Tub. Please read all instructions carefully before setup, operation, and maintenance to ensure proper function and longevity of your product.
The Coleman SaluSpa Sicily 180 AirJet Inflatable Hot Tub is designed for relaxation, featuring 180 AirJets for a soothing massage, a digital control panel for temperature adjustments, and durable DuraPlus materials for structural integrity. It also includes a Freeze Shield automatic heating function for colder seasons and a ChemConnect dispenser for water maintenance.
Important Safety Information
Adherence to electrical safety guidelines is crucial for preventing hazards and ensuring safe operation.
- Extension Cords: Use of an extension cord or multi-plug adaptor is strictly prohibited.
- Power Connection: Connect to a grounded 110-120 V AC, 60Hz, Single Phase 12A receptacle (corresponding voltage of hot tub).
- Grounded Receptacle: The grounded receptacle must be resistant to humidity and capable of high-power loading. If unsure of quality, consult an electrician before use.
- Plug and Socket Inspection: Regularly inspect the plug and socket for signs of damage. If signs of damage exist, do NOT plug back into the socket.
Installation Location:
Outdoor setup requires a level ground that:
- Supports the weight of the hot tub, water, and users.
- Has adequate drainage to avoid property damage.
- Is within 12 ft. of a grounded receptacle (3-prong outlet).
Special Indoor Installation Requirements:
If setting up indoors, please note:
- Humidity could cause property damage.
- Adequate ventilation around the area is required (consult an expert to confirm).
Setup
Proper setup is essential for the performance and safety of your hot tub. Ensure all components are present and undamaged before beginning.
Unpacking and Component Identification
Your package includes the inflatable hot tub, a pump/heater unit, a protective cover, a ChemConnect dispenser, filter cartridge(s), and a repair patch. Refer to the 'What's in the Box' image for a visual guide.
Hot Tub Inflation
- Place the hot tub on a flat, level surface as specified in the safety section.
- Connect the inflation hose from the pump unit to the hot tub's air valve.
- Inflate the hot tub until it is firm to the touch but not over-inflated. Avoid using high-pressure air compressors.
- Once inflated, disconnect the hose and securely close the air valve.
Pump and Heater Unit Connection
Attach the pump and heater unit to the hot tub following the instructions provided in the separate pump manual. Ensure all connections are tight to prevent leaks.
Filling the Hot Tub
Fill the hot tub with water to the recommended level indicated on the interior wall. Do not overfill.
Accessory Setup
SaluSpa Spa Seats: These non-slip seats have weighted feet for stability and adjustable legs to set the ideal seated height between 3.15 and 4.72 inches. Simply place them on the hot tub floor.
SaluSpa Padded Headrest Pillows: These ergonomic pillows provide head and neck support. They feature adjustable straps to customize height and are covered with a washable mesh fabric. Attach them to the rim of the hot tub as desired.
Operating Instructions
Familiarize yourself with the digital control panel to manage your hot tub's functions.
Digital Control Panel
The user-friendly digital control panel allows for effortless temperature adjustments and activation of the AirJet massage system. Refer to the pump unit's specific manual for detailed button functions.
Heating Function
- Activate the heating function via the control panel. The water temperature can be set up to 104 degrees Fahrenheit (40 degrees Celsius).
- The Freeze Shield automatic heating function will maintain a suitable water temperature during colder seasons to prevent internal components from freezing. This function activates automatically when the water temperature drops below a certain threshold.
AirJet Massage System
Press the AirJet button on the control panel to activate the 180 AirJets, which release warm air into the water for a soothing massage experience.
Maintenance
Regular maintenance ensures optimal performance, hygiene, and extends the lifespan of your hot tub.
Water Chemistry
Use the included ChemConnect dispenser to maintain clean and healthy water. This dispenser evenly disperses the correct amount of chlorine or other sanitizers into the water. Follow the chemical manufacturer's instructions for dosage and testing.
Filter Cartridge
The hot tub uses a Filter Cartridge - VI. Regularly clean and replace the filter cartridge to ensure efficient water filtration. Refer to the pump manual for specific cleaning and replacement intervals.
Protective Cover
Always use the protective cover when the hot tub is not in use. The EnergySense insulated cover helps speed up heating time and prevents heat loss, making the hot tub more energy efficient.
Cleaning
- Hot Tub Surface: Clean the interior and exterior surfaces of the hot tub with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly.
- Spa Seats and Headrest Pillows: The SaluSpa Spa Seats are easy to clean. The Padded Headrest Pillows are covered with washable mesh fabric; remove and wash as needed.
Storage
When storing the hot tub for extended periods, ensure it is completely drained, cleaned, and dry. Deflate and fold it carefully, storing it in a dry, protected area away from direct sunlight and extreme temperatures.
Troubleshooting
This section addresses common issues you might encounter with your hot tub. For problems not listed here, contact customer support.
Hot Tub Not Heating
- Check Power: Ensure the hot tub is properly plugged into a grounded outlet and there is no power outage.
- Temperature Setting: Verify the desired temperature is set correctly on the digital control panel.
- Filter Cleanliness: A dirty filter can restrict water flow, affecting heating efficiency. Clean or replace the filter cartridge.
- Water Level: Ensure the water level is between the minimum and maximum fill lines.
- Error Codes: Check the control panel for any error codes and refer to the pump manual for their meaning.
AirJets Not Working
- Power: Confirm the hot tub is powered on.
- AirJet Button: Ensure the AirJet button on the control panel has been pressed.
- Blockages: Inspect the AirJet nozzles for any blockages.
Water Quality Issues
- Chemical Balance: Test the water chemistry (pH, chlorine levels) and adjust using the ChemConnect dispenser and appropriate chemicals.
- Filter: Clean or replace the filter cartridge regularly.
- Water Replacement: If issues persist, consider partially or fully draining and refilling the hot tub with fresh water.
Specifications
| Brand | Bestway (Coleman SaluSpa) |
| Model Name | Sicily 180 AirJet (Model Number: 90519E-BW) |
| Seating Capacity | 5-7 people |
| Dimensions (Overall) | 77" L x 77" W x 28" H (196 cm L x 196 cm W x 71 cm H) |
| Outer Diameter | 85" (216 cm) |
| Inner Diameter | 65" (165 cm) |
| Water Capacity | 314 Gallons (1189 Liters) |
| Max. Water Temperature | 104°F (40°C) |
| Number of AirJets | 180 |
| Material | DuraPlus (Polyvinyl Chloride, Polypropylene) |
| Power Source | 110-120V AC, 60Hz (Electrical) |
| UPC | 193802354836 |
Warranty Information
For detailed warranty information, please refer to the warranty card included with your product or visit the official Bestway/Coleman SaluSpa website. Keep your proof of purchase for any warranty claims.
Support
If you require further assistance, have questions, or need to order replacement parts, please contact Bestway/Coleman SaluSpa customer support. Contact details can typically be found on the product packaging or the official brand website.
Online Resources: Visit the official Bestway website for FAQs, troubleshooting guides, and product registration.