Agilestic Electric Standing Desk User Manual

1. Product Overview

The Agilestic Electric Standing Desk is designed to provide an ergonomic and versatile workspace. It features an electric lifting system for adjustable height, integrated storage, and a keyboard tray for enhanced comfort.

Image: Agilestic Electric Standing Desk in a workspace setup.

Key Features:

• Electric Lifting System: Height adjustment from 28.3'' to 45.7'' with low noise operation (under 55 dB).
• Memory Presets: Two memory keys to save preferred height settings.
• Integrated Storage: Two fabric drawers for organizing items and a monitor stand with additional compartments.
• Keyboard Tray: Slide-out keyboard tray for ergonomic typing and mouse use.
• Cable Management: Wire collection hole in the tabletop to keep cables tidy.
• Anti-Collision Technology: Automatically reverses 1 inch if an obstacle is detected during height adjustment.
• Sturdy Construction: Industrial-grade steel frame with a T-shaped design, supporting up to 154 lbs.
• Durable Motor: Motor tested for 50,000 lift cycles.
• FSC-Certified Wood: Tabletop made from sustainably sourced wood.

2. Setup and Assembly

This section provides detailed instructions for assembling your Agilestic Electric Standing Desk. Please follow the steps carefully to ensure proper setup.

Assembly Video Guide:

Step-by-Step Assembly:

1. Prepare the Desk Legs: Ensure both desk legs are at a consistent height. If there is a significant difference, gently press down on the taller leg until both are level.
2. Install Motor and Hexagonal Bar: Insert the hexagonal metal bar into the motor. Ensure the prominent clamp point on the screw is inserted into the clamp. The motor mounting hole is located on the side of the leg labeled '1'. Align the motor and holes on the table leg, then insert the lead screw.
3. Attach Crossbar: Connect the crossbar (labeled '3') between the two legs. Ensure the holes in the crossbar face inward. Align the holes in the bars and legs, then secure with 4 'D' screws.
4. Install Leg Bases: Lift the frame and attach the leg bases (labeled '7') to the bottom of each leg. Secure with 8 'E' screws, ensuring the crossbar is facing upward. Adjust the foot pads to level the desk on the floor.
5. Attach Side Panels: Install the side panels (labeled '5') to the top of the legs. Ensure both sides face outward. Secure with 4 'B' screws.
6. Mount Tabletop: Place the tabletop onto the assembled frame. Ensure the hole for the manual controller is close to the motor side. Align the table plate holes with the frame and tighten with 12 'C' screws.
7. Install Cable Management and Hooks: Attach the cable management tray (labeled '6') to the underside of the tabletop using 2 'C' screws and 1 'B' screw. Install the hooks (labeled 'J') on the left and right sides of the tabletop using 4 'C' screws.
8. Connect Controller: Install the manual controller on the side close to the motor, aligning it with the pre-drilled holes. Secure with 2 'C' screws. Arrange the power cord with the cable buncher and plug it into the controller.
9. Assemble Keyboard Tray: Separate the three rail fittings of the keyboard tray. Stretch the fitting to its maximum length and press the bayonet to split it. Attach the slide rails to the keyboard tray board (labeled '14') using 4 'M' screws, ensuring one side of the slide rail is flush with one side of the board. Attach the keyboard tray to the underside of the desk using 4 'L' screws.
10. Assemble Monitor Stand: Insert 4 'N' wooden dowels into the monitor stand base (labeled '15'). Attach the monitor stand side supports (labeled '14') to the base using 4 'Q' screws. Place the monitor stand on the tabletop and secure it from underneath with 7 'L' screws.
11. Install Fabric Drawers: Fold and assemble the two fabric drawers. Insert them into the designated compartments on the monitor stand.

3. Operating Instructions

Your Agilestic Electric Standing Desk is equipped with an intuitive control panel for easy height adjustment and memory functions.

Image: Detailed view of the desk's control panel.

Control Panel Functions:

• Up/Down Arrows (▲ / ▼): Press and hold to adjust the desk height upwards or downwards.
• LED Screen: Displays the current desk height in inches.
• Memory Presets (1, 2): Press and hold a memory button (1 or 2) to save the current height. To recall a saved height, simply press the corresponding memory button.

Anti-Collision System:

The desk is equipped with an auto-sensing anti-collision system. If the lifting table encounters an obstacle during movement, it will automatically reverse approximately 1 inch to prevent potential damage or injury.

4. Maintenance

To ensure the longevity and optimal performance of your Agilestic Electric Standing Desk, follow these maintenance guidelines:

• Regular Cleaning: Wipe the tabletop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Check Connections: Periodically inspect all screws and electrical connections to ensure they are secure. Tighten any loose screws.
• Weight Capacity: Do not exceed the maximum weight capacity of 154 lbs to prevent damage to the motor and frame.
• Cable Management: Keep cables organized using the provided cable management hole and ties to prevent snagging during height adjustments.

5. Troubleshooting

This section addresses common issues you might encounter with your standing desk and provides solutions.

Troubleshooting Video Guide:

Common Issues and Solutions:

6. Specifications

7. Warranty and Support

Agilestic provides a limited warranty for this product. For any questions or warranty concerns during assembly and use, please do not hesitate to contact us.

Protection Plans:

• 2-Year Protection Plan: $44.99
• 3-Year Protection Plan: $56.99
• Complete Protect: One plan covers all eligible past and future purchases for $16.99/month.

For further assistance, please refer to the contact information provided with your purchase or visit the official Agilestic store online.