Halitaa Full Size Floating Bed Frame (Model JY9956) Instruction Manual

1. Introduction

Thank you for choosing the Halitaa Full Size Floating Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

1.1 Safety Warnings

• Do not load more than 1000 pounds on the bed frame.
• Exercise caution around sharp edges during assembly and use.
• Always follow the assembly instructions carefully to prevent instability or collapse.
• Ensure all connections are securely tightened before use.
• Keep small parts away from children during assembly.

Image 1.1: Halitaa Full Size Floating Bed Frame with LED lights and charging station.

2. Package Contents

Before assembly, verify that all components are present. If any parts are missing or damaged, please contact customer support.

• Headboard (Upholstered PU Leather with Charging Station)
• Side Rails (Left and Right)
• Footboard
• Center Support Beam
• Wooden Slats
• Support Legs
• LED Light Strip and Remote Control
• Hardware Pack (Screws, Bolts, Washers, Allen Wrenches)
• Instruction Manual

3. Assembly Instructions

Assembly typically requires two adults. Each part is labeled with letters for easy identification. Follow the steps sequentially.

3.1 Required Tools

• Included Allen Wrenches (2)
• Phillips Head Screwdriver (not included, may be helpful)

3.2 Step-by-Step Assembly

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided labels.
2. Attach Side Rails to Headboard: Connect the left and right side rails to the headboard using the specified bolts and washers. Ensure connections are snug but do not overtighten initially.
3. Attach Footboard: Connect the footboard to the side rails. Ensure all four corners are aligned and secured.
4. Install Center Support Beam: Place the center support beam into its designated slots or brackets. Attach any necessary support legs to the center beam.
5. Install Wooden Slats: Lay the wooden slats across the bed frame. The slats are designed with a narrow distance between them for optimal mattress support. Some slats may feature silence foam for noise reduction and velcro for easy, secure attachment to the frame. Ensure the foam side faces upwards.
6. Install LED Light Strip: Locate the designated area for the LED light strip, typically along the underside of the frame. The manufacturer has included velcro for easy attachment. Secure the light strip firmly.
7. Final Tightening: Once all components are in place, systematically tighten all bolts and screws. Do not overtighten to avoid damaging the frame.

Image 3.1: Full Size Bed Frame Dimensions (79.2"L x 57.1"W x 45.7"H).

Image 3.2: Assembly details showing silence foam on slats, velcro for easy assembly, and narrow slat spacing.

4. Operating Instructions

4.1 LED Lights Operation

The integrated LED lights are controlled by the included remote control. Ensure the light strip is properly connected to a power source.

• Power On/Off: Press the power button on the remote to turn the lights on or off.
• Color Selection: Use the color buttons on the remote to choose from over 20 static colors.
• Dynamic Modes: Select from 19 dynamic lighting modes for various effects.
• Speed Adjustment: Adjust the speed of dynamic modes using the speed control buttons (10 speed modes available).
• Brightness Control: Adjust the brightness level using the brightness buttons (5 brightness modes available).

Image 4.1: LED remote control and its various functions for color, mode, speed, and brightness adjustments.

4.2 Charging Station Usage

The headboard features an integrated charging station for convenience.

• AC Outlets: Two 120V / 12A AC outlets are provided for standard electrical devices.
• USB Ports: Two 5V / 2A USB ports are available for charging mobile devices.
• Power Cord: The charging station is equipped with a 6.5-foot power cord (powerx 2).
• Note: The LED lights will not occupy the position of the charging station's sockets.

Image 4.2: Detailed view of the headboard's charging station, featuring AC outlets and USB ports.

5. Maintenance

5.1 Cleaning the Bed Frame

• PU Leather Headboard: For general cleaning, wipe the PU leather with a soft, damp cloth. For deeper cleaning, the manufacturer recommends dry cleaning only for the furniture finish. Avoid harsh chemicals or abrasive cleaners.
• Metal Frame: Wipe the metal components with a dry or slightly damp cloth.

Image 5.1: Features of the PU leather headboard, including soft-touch comfort and easy cleaning.

5.2 General Care

• Regularly check all bolts and screws to ensure they remain tight. Retighten as necessary.
• Avoid dragging the bed frame when moving it; lift it to prevent damage to the frame and flooring.
• The bed frame offers 5.1 inches of under-bed space, allowing for storage and easy cleaning with a vacuum cleaner.

6. Troubleshooting

If you encounter issues with your Halitaa bed frame, refer to the following common problems and solutions:

7. Specifications

• Model Number: JY9956
• Size: Full
• Product Dimensions: 79.2"L x 57.1"W x 45.7"H
• Item Weight: 80 pounds
• Weight Capacity: Up to 1000 pounds
• Material: Upholstered PU Leather (Headboard), Metal/Wood (Frame)
• Color: Leather Black
• Special Features: Floating Design, Adjustable RGB LED Lights, Integrated Charging Station (2 AC Outlets, 2 USB Ports)
• Box Spring Required: No
• Assembly Required: Yes
• Under Bed Clearance: 5.1 inches

8. Warranty and Support

Halitaa is committed to providing quality products. While specific warranty details are not provided in this manual, if you encounter any problems or have questions regarding your bed frame, please contact Halitaa customer support. Our team will endeavor to assist you promptly and resolve any issues you may experience.

Please refer to your purchase documentation or the retailer's website for the most current warranty information and contact details.