1. Introduction
Thank you for choosing the Livpure Koolbliss Desert Air Cooler. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new air cooler. Please read this manual thoroughly before using the appliance and retain it for future reference.
Figure 1: Livpure Koolbliss Desert Air Cooler (Model KOOLBLISS-65L)
2. Safety Instructions
To prevent injury to yourself and others, or damage to the appliance, please observe the following safety precautions:
- Always ensure the cooler is placed on a stable, level surface.
- Do not operate the cooler with a damaged power cord or plug.
- Keep the cooler away from direct sunlight and heat sources.
- Do not immerse the appliance in water or other liquids.
- Unplug the cooler from the power outlet before cleaning, filling, or performing any maintenance.
- Ensure the water tank is filled to the appropriate level; do not overfill or operate with insufficient water.
- Keep children and pets away from the cooler during operation.
- Do not block the air inlet or outlet grilles.
- This appliance is designed for domestic use only.
3. Product Overview
The Livpure Koolbliss Desert Air Cooler is designed to provide efficient cooling with several user-friendly features.
Key Features:
- Anti-bacterial Honeycomb Pads: Ensures clean and hygienic air circulation.
- Ice Chamber: Dedicated compartment for ice to enhance cooling efficiency.
- Multidirectional Wheels: For easy mobility and relocation.
- Air Throw at Body Level: Distributes cool air at a comfortable height.
- Water Level Indicator: Visual indicator for monitoring water supply.
- Inverter Compatibility: Operates on inverter power during outages.
- Thermal Overload Protection: Automatically shuts off to prevent overheating.
- Speed Controller: Adjustable fan speed (Low, Medium, High).
Components:
- Air Cooler Unit
- User Manual (This document)
- Wheels (for assembly)
- Warranty Card
Figure 2: Key features of the Koolbliss Air Cooler including speed controller, wheels, and honeycomb pads.
Figure 3: Dedicated Ice Chamber for enhanced cooling.
4. Setup
Follow these steps to set up your Livpure Koolbliss Desert Air Cooler:
- Unboxing: Carefully remove the cooler from its packaging. Inspect for any damage.
- Wheel Installation: Attach the multidirectional wheels to the base of the cooler. Ensure they are securely fastened for easy movement.
- Placement: Position the cooler on a flat, stable surface in a well-ventilated area. For optimal cooling, place it near a window or door to allow fresh air intake.
- Water Filling: Open the water inlet and fill the tank with clean water. Do not exceed the 'MAX' water level indicator. The cooler has a 65-liter reservoir capacity.
- Power Connection: Plug the power cord into a suitable electrical outlet (220 Volts AC).
Video 1: Unboxing and initial setup of the Livpure Koolbliss Desert Air Cooler. This video demonstrates how to unpack the cooler and install its wheels.
5. Operation
Operating your Livpure Koolbliss Air Cooler is straightforward:
- Power On: Turn the 'Speed' knob to 'Low', 'Medium', or 'High' to start the fan.
- Adjust Fan Speed: Rotate the 'Speed' knob to select your desired airflow intensity (Low, Medium, High).
- Cooling Function: To activate cooling, turn the 'Function' knob to 'Cool'. This will start the water pump, wetting the honeycomb pads.
- Swing Function: To enable automatic air oscillation, turn the 'Function' knob to 'Swing'. For combined cooling and swing, select 'Cool-Swing'.
- Ice Chamber Usage: For enhanced cooling, open the ice chamber lid on top of the cooler and add ice cubes. Close the lid securely after adding ice.
- Water Level Monitoring: Regularly check the water level indicator on the front of the cooler. Refill the tank when the water level is low to ensure continuous cooling and protect the water pump.
- Power Off: To turn off the cooler, set both 'Speed' and 'Function' knobs to 'Off'. Unplug the appliance from the power outlet when not in use for extended periods.
Figure 4: Control panel with Speed and Function knobs.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your air cooler.
Cleaning the Honeycomb Pads:
The anti-bacterial honeycomb pads should be cleaned periodically, especially if you notice reduced airflow or an odor.
- Unplug the cooler from the power supply.
- Carefully remove the back and side panels to access the honeycomb pads.
- Gently remove the pads.
- Rinse the pads under running water to remove dust and mineral deposits. For stubborn deposits, soak them in a mild detergent solution for a few minutes before rinsing.
- Allow the pads to air dry completely before reinserting them.
- Reattach the panels securely.
Figure 5: Antibacterial Honeycomb Pads.
Draining the Water Tank:
It is recommended to drain and clean the water tank regularly to prevent algae growth and maintain hygiene.
- Unplug the cooler.
- Locate the drain plug at the bottom of the cooler.
- Place a bucket or container under the drain plug and remove the plug to empty the tank.
- Clean the inside of the tank with a soft cloth and mild detergent, then rinse thoroughly.
- Replace the drain plug securely.
General Cleaning:
- Wipe the exterior of the cooler with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure all grilles are free from dust and obstructions.
7. Troubleshooting
If you encounter any issues with your air cooler, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooler not turning on | No power supply; Power cord not plugged in; Thermal overload protection activated. | Check power outlet and plug; Ensure cooler is not overheated. |
| No cooling effect | Water tank empty; Pump not working; Honeycomb pads dry; Cooling function not activated. | Fill water tank; Check pump operation; Ensure pads are wet; Turn 'Function' knob to 'Cool'. |
| Weak airflow | Fan speed set too low; Air inlets/outlets blocked; Dirty honeycomb pads. | Increase fan speed; Clear obstructions; Clean honeycomb pads. |
| Unpleasant odor | Stagnant water in tank; Dirty honeycomb pads. | Drain and clean water tank; Clean honeycomb pads. |
| Water leakage | Overfilled water tank; Drain plug not secured; Damaged water pipe. | Do not overfill; Ensure drain plug is tight; Contact customer support if damage is suspected. |
If the problem persists after attempting these solutions, please contact Livpure customer support.
8. Specifications
Detailed technical specifications for the Livpure Koolbliss Desert Air Cooler - 65 L:
| Feature | Detail |
|---|---|
| Brand | Livpure |
| Model Number | KOOLBLISS-65L |
| Material | Plastic |
| Mounting Type | Freestanding |
| Colour | White & Blue |
| Air Flow Capacity | 5000 Cubic Feet Per Minute (CMH) |
| Controls Type | Knob |
| Reservoir Capacity | 65 Liters |
| Floor Area Coverage | 300 Square Feet |
| Item Weight | 15.5 Kilograms |
| Recommended Uses | Commercial, Industrial, Residential |
| Form Factor | Desert |
| Wattage | 190 Watts |
| Noise Level | 58 Decibels |
| Number Of Speeds | 3 |
| Voltage | 220 Volts (AC) |
| Item Dimensions (D x W x H) | 49.5D x 63.5W x 114H Centimeters |
| Manufacture Year | 2023 |
| Energy Consumption Standard | 95 Watts |
9. Warranty and Support
Your Livpure Koolbliss Desert Air Cooler comes with a comprehensive warranty and dedicated customer support.
Warranty Information:
- 1 Year Comprehensive Warranty on the entire product.
- 2 Years Warranty specifically on the fan motor.
Please refer to the included Warranty Card for detailed terms and conditions.
Customer Support:
For any service, repair, or technical assistance, please contact Livpure customer support. Ensure you have your model number (KOOLBLISS-65L) and purchase details ready when contacting support.
Manufacturer: LIVPURE PRIVATE LIMITED
Importer Contact Information: Livpure Private Limited