Product Overview
The Lumisky Aura is a portable, wireless LED lamp designed for both indoor and outdoor use. It features a dimmable warm white light and a natural bamboo handle for easy carrying. The lamp is splash-proof (IP44 rated) and UV resistant, making it suitable for various environments. It provides illumination for approximately 6 to 12 hours depending on the selected light intensity, after a full charge via its included cable.
Image: The Lumisky Aura lamp being held by hand in a dark outdoor setting, showcasing its portability and warm glow.
Setup
- Unpacking: Carefully remove the Lumisky Aura lamp from its packaging. Ensure all components, including the lamp and charging cable, are present.
- Initial Charging: Before first use, fully charge the lamp. Connect the provided charging cable to the lamp's charging port and plug the other end into a suitable USB power adapter (not included). A full charge typically takes approximately 3 hours. The lamp is ready for use once fully charged.
Operating Instructions
- Power On/Off: Locate the power button on the lamp. Press the button once to turn the lamp on. Press it again to turn the lamp off.
- Adjusting Brightness (Dimming): The Aura lamp features variable intensity. While the lamp is on, press and hold the power button to cycle through brightness levels. Release the button when the desired brightness is achieved. The lamp will remember the last brightness setting.
- Battery Life: A fully charged lamp provides approximately 6 hours of illumination at maximum brightness and up to 12 hours at lower intensities.
Image: The Lumisky Aura lamp on an outdoor dining table, surrounded by glassware, demonstrating its use as a decorative table lamp.
Maintenance
- Cleaning: To clean the lamp, use a soft cloth dampened with warm water and a mild soap. Avoid abrasive cleaners or solvents that could damage the lamp's finish or electronic components.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan.
- Battery Care: To maintain optimal battery performance, avoid completely draining the battery frequently. Recharge the lamp when the light output noticeably diminishes.
Troubleshooting
- Lamp does not turn on:
- Ensure the lamp is fully charged. Connect it to the charging cable and allow it to charge for 3 hours.
- Verify the charging cable is securely connected to both the lamp and the power source.
- Light output is dim or flickering:
- The battery may be low. Recharge the lamp.
- Adjust the brightness level using the dimming function.
- Lamp does not charge:
- Check if the charging cable is damaged. Try a different compatible USB cable if available.
- Ensure the USB power adapter is functioning correctly.
Specifications
| Feature | Detail |
|---|---|
| Model Number | AURA |
| Brand | Lumisky |
| Dimensions (L x W x H) | 18 x 18 x 27 cm |
| Weight | 600 grams |
| Material | Bamboo |
| Light Source Type | LED |
| Max Luminous Flux | 100 Lumens |
| Voltage | 5 Volts |
| Battery Type | 1 Lithium-ion (included) |
| Battery Life | 6-12 hours (depending on intensity) |
| Charging Time | Approx. 3 hours (via cable) |
| Water Protection | IP44 (Splash-proof) |
| Included Components | Lamp, Charging Cable |
Image: EU Energy Label for the Lumisky Aura lamp, indicating its energy efficiency class F and 1 kWh/1000h consumption. For more details, visit the EPREL database.
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Lumisky customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.