Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Follow assembly instructions carefully.
- Do not exceed the maximum weight limit of 700 pounds.
- Ensure the bed frame is stable and not at risk of tipping over.
- Periodically check all screws and bolts to ensure they are tightened.
- Do not tighten screws until fully assembled.
- Make sure the legs remain in contact with the ground.
- Mattress is not included.
Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Headboard (Upholstered)
- Footboard (Upholstered)
- Side Rails (Upholstered, 2 sections per side)
- Center Support Beam
- Support Legs (8 total)
- Wooden Slats (12 pieces)
- Hardware Pack (Bolts, Washers, Allen Wrench)
- Assembly Instruction Manual
Image: All components of the VECELO Queen Size Bed Frame laid out with dimensions.
Assembly Instructions
Assembly is designed to be straightforward. It is recommended to assemble the bed frame with two people. Do not fully tighten bolts until all components are in place.
Step 1: Unpack and Identify Parts
Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list.
Video: An overview of the VECELO Y-Shape Upholstered Bed Frame assembly process, showing parts being unpacked and laid out.
Step 2: Attach Side Rails to Headboard and Footboard
Connect the upholstered side rails to the headboard and footboard using the provided bolts and washers. Ensure the connections are secure but do not fully tighten yet.
Image: The VECELO Queen Size Bed Frame fully assembled in a bedroom setting.
Step 3: Install Center Support Beam and Legs
Attach the center support beam to the designated brackets on the headboard and footboard. Secure the support legs to the center beam and side rails. Ensure all legs are firmly on the ground.
Step 4: Place Wooden Slats
Lay the wooden slats across the bed frame. The slats feature a Velcro design for quick installation and to prevent movement and noise. Ensure all slats are evenly spaced and securely attached.
Image: Detailed view of the bed frame's sturdy construction, 7.9-inch under-bed clearance, and Velcro slat design for noise-free support.
Step 5: Final Tightening
Once all components are in place and aligned, fully tighten all bolts using the provided Allen wrench. Do not overtighten.
Operating Instructions
Mattress Placement
Place your mattress directly onto the wooden slats. No box spring is needed for this bed frame. The sturdy wooden slats provide ample support for various mattress types, including latex, memory foam, or spring mattresses.
Adjusting Headboard Height
The headboard is height-adjustable to accommodate different mattress thicknesses. To adjust, loosen the bolts connecting the headboard to the side rails, slide the headboard to your desired height (between 41.7 and 47.7 inches), and then re-tighten the bolts securely.
Image: Visual representation of the headboard's adjustable height settings, ranging from 41.7 to 47.7 inches.
Maintenance and Care
To ensure the longevity and appearance of your VECELO bed frame, follow these care instructions:
- Cleaning: The upholstered parts of the bed frame should be dry cleaned only. For minor spills, gently blot with a clean, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Weight Distribution: Distribute weight evenly across the bed frame to prevent undue stress on any single point.
- Moving the Bed: When moving the bed frame, lift it rather than dragging it to prevent damage to the legs and frame structure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is squeaking. | Loose bolts or uneven slat placement. | Ensure all bolts are fully tightened. Check that wooden slats are properly seated and evenly distributed. The Velcro design should minimize noise. |
| Bed frame feels unstable. | Incomplete assembly or loose connections. | Re-check all connections, especially where side rails meet the headboard/footboard and the center support beam. Ensure all support legs are making firm contact with the floor. |
| Headboard is not at desired height. | Incorrect adjustment. | Loosen headboard bolts, adjust to one of the pre-drilled height settings, and re-tighten securely. |
| Missing parts. | Packaging error. | Contact VECELO customer service immediately with your model number and a description of the missing part. |
Product Specifications
| Model Number | ZH-QB02-BGE-BC11 |
| Brand | VECELO |
| Size | Queen (U.S. Standard) |
| Color | Beige |
| Upholstery Fabric Type | Velvet |
| Product Dimensions (L x W x H) | 81.3"L x 60.04"W x 47.63"H |
| Item Weight | 72 Pounds |
| Weight Limit | 700 Pounds |
| Special Features | Adjustable Headboard, Durable, No Box Spring Needed, Squeak Resistant, Stable |
| Assembly Required | Yes |
| Product Care Instructions | Dry Clean Only |
Warranty and Customer Support
VECELO bed frames are backed by a brand warranty to ensure customer satisfaction. For any questions, concerns, or assistance with your product, please contact VECELO customer service.
- Return Policy: This product is eligible for a 90-day easy return policy.
- Contact: Refer to the contact information provided in your purchase documentation or visit the official VECELO website for support.