RemoteOverstock CR1632 Battery Replacement Kit for Saab Remote Head Keys (1999-2009)

1. Introduction

This manual provides detailed instructions for replacing the CR1632 battery in your compatible Saab remote head key fob using the RemoteOverstock battery replacement kit. This kit is designed for Saab 9-3 and 9-5 models from 1999-2009 with FCC ID: KHH 20TN-1. Following these steps will help you replace the battery without requiring a service appointment or remote reprogramming.

2. Product Overview

The RemoteOverstock CR1632 Battery Replacement Kit includes:

• Two (2) CR1632 3V Lithium Batteries
• One (1) Pry Tool for opening the remote case

These are original equipment manufacturer (OEM) equivalent batteries, ensuring compatibility and reliable performance for your remote head key fob.

This image displays the components of the battery replacement kit: a typical Saab remote head key, two CR1632 3V lithium batteries (Made in Indonesia), and highlights the 'Child Secure' feature of the battery packaging. The batteries are shown with a positive (+) terminal indicator.

3. Setup and Battery Replacement

Follow these steps to replace the battery in your Saab remote head key fob:

1. Prepare Your Workspace: Ensure you have a clean, well-lit area.
2. Locate the Seam: Examine your remote head key fob to identify the seam where the two halves of the case meet.
3. Open the Remote Case: Carefully insert the provided pry tool into the seam of the remote case. Gently twist or pry to separate the two halves of the case. Apply steady, even pressure to avoid damaging the plastic.
4. Remove the Old Battery: Once the case is open, locate the existing CR1632 battery. Use the pry tool or a small, non-metallic object to carefully lift the old battery out of its compartment. Note the orientation of the positive (+) and negative (-) sides.
5. Insert the New Battery: Take one of the new CR1632 batteries from the kit. Insert it into the battery compartment, ensuring the positive (+) side is facing the same direction as the old battery was.
6. Close the Remote Case: Align the two halves of the remote case and press them firmly together until they snap securely into place. Ensure there are no gaps.
7. Test the Remote: Test the functionality of your remote head key fob with your vehicle to confirm the battery replacement was successful.

For a visual guide, an instructional video is typically provided via a link on the product packaging. Please refer to that resource for a step-by-step demonstration.

4. Operating Your Remote After Battery Replacement

After successfully replacing the CR1632 battery, your remote head key fob should function immediately. No reprogramming is typically required for battery replacement in these models.

5. Maintenance and Storage

• Battery Storage: Store unused CR1632 batteries in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures. Keep them out of reach of children and pets.
• Disposal: Dispose of old batteries according to local regulations. Many electronic stores or recycling centers accept used batteries. Do not dispose of batteries in household waste or by incineration.
• Remote Care: Keep your remote head key fob clean and dry. Avoid exposing it to excessive moisture or impact.

6. Troubleshooting

If your remote head key fob does not function after battery replacement, consider the following:

• Battery Orientation: Double-check that the new CR1632 battery is inserted with the correct positive (+) and negative (-) orientation.
• Secure Closure: Ensure the remote case is fully closed and snapped together, with no gaps.
• Battery Contact: Verify that the battery is making proper contact with the terminals inside the fob. Gently adjust if necessary.
• New Battery Check: If possible, try the second CR1632 battery from the kit to rule out a faulty battery.
• Remote Damage: If the remote still does not work, there may be an issue with the remote itself, unrelated to the battery.

7. Specifications

8. Warranty and Support

For any questions, concerns, or support regarding your RemoteOverstock CR1632 Battery Replacement Kit, please contact RemoteOverstock customer service. Refer to your product packaging for specific contact information or visit the RemoteOverstock website.