Introduction
Thank you for choosing the vidaXL Engineered Wood Smoked Oak Bookshelf. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bookshelf. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image: Fully assembled vidaXL 5-Tier Smoked Oak Bookshelf, showcasing its design and storage capacity.
Safety Information
- Wall Attachment: To prevent the bookshelf from overturning, it must be used with the provided wall attachment device. Failure to do so can result in serious injury.
- Screws and Plugs: Screws and plugs for inside the wall are not included. We advise finding and using screws and plugs suitable specifically for your wall type. If unsure, consult a professional.
- Assembly: Assemble the product on a soft, clean surface to prevent scratches. Ensure all parts are correctly installed and tightened before use.
- Weight Distribution: Distribute weight evenly across the shelves. Do not overload shelves beyond their capacity.
- Children: Keep children away from the assembly area. Do not allow children to climb on or play with the bookshelf.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Engineered wood shelves (5 pieces)
- Metal frame components (vertical supports, X-bars)
- Adjustable feet
- Assembly hardware (screws, bolts, nuts, etc.)
- Wall attachment device
- Assembly instructions (this manual)
Setup and Assembly
Follow these steps carefully to assemble your bookshelf. It is recommended to have two people for assembly.
Tools Required (Not Included):
- Phillips head screwdriver
- Hammer (for wall plugs, if applicable)
- Drill (for wall attachment, if applicable)
- Level
Assembly Steps:
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list to identify each piece.
- Assemble the Metal Frame: Connect the vertical metal supports using the provided hardware. Ensure the X-bar components are correctly positioned and secured to provide stability.
Image: Rear view of the bookshelf frame, highlighting the X-bar design for enhanced stability.
- Attach Shelves: Secure the engineered wood shelves to the metal frame using the designated hardware. Ensure the raised edges of the shelves are facing upwards and positioned correctly.
- Install Adjustable Feet: Screw the adjustable feet into the bottom of the bookshelf frame. These feet help balance the unit on uneven surfaces.
Image: Detail of the adjustable foot, demonstrating how to level the bookshelf on uneven floors.
- Position and Level: Place the assembled bookshelf in its desired location. Use a level to ensure it stands straight. Adjust the feet as necessary to achieve stability.
- Secure to Wall: Attach the provided wall attachment device to the top rear of the bookshelf and to a suitable wall stud or using appropriate wall plugs and screws (not included). This step is crucial for safety.
Operating and Usage
- Loading: Place items on the shelves, distributing weight evenly. Avoid placing heavy items exclusively on one side or on the very top shelf without proper balance.
- Stability: Regularly check the stability of the bookshelf, especially after moving it. Re-tighten any loose screws if necessary.
- Environment: Avoid placing the bookshelf in direct sunlight or near heat sources to prevent material degradation. Maintain a stable humidity level.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the engineered wood finish.
- Dusting: Regular dusting with a dry, soft cloth will help maintain the appearance of the bookshelf.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bookshelf is wobbly | Uneven floor; loose fasteners | Adjust the leveling feet. Check and tighten all assembly screws. Ensure wall attachment is secure. |
| Parts missing or damaged | Packaging error; shipping damage | Do not proceed with assembly. Contact vidaXL customer support immediately for replacement parts. |
| Difficulty assembling | Incorrect step sequence; misaligned parts | Review the assembly steps carefully. Ensure parts are oriented correctly. Do not force components. |
Specifications
Image: Technical diagram illustrating the precise dimensions of the bookshelf in both centimeters and inches.
- Model: 837699
- Brand: vidaXL
- Material: Engineered wood, metal
- Color: Smoked Oak
- Dimensions (L x W x H): 39.4" x 13" x 71.1" (100 cm x 33 cm x 180.5 cm)
- Number of Tiers: 5
- Item Weight: Approximately 28.75 kg (63.38 lbs)
- Assembly Required: Yes
Customer Support
For further assistance, missing parts, or warranty inquiries, please contact vidaXL customer support through their official website or the retailer where the product was purchased.
Website: www.vidaxl.com