SYRIS Rustic Farmhouse Style Solid Wood Dining Table User Manual

1. Introduction

This manual provides instructions for the assembly, safe operation, maintenance, and troubleshooting of your SYRIS Rustic Farmhouse Style Solid Wood Dining Table, model S:120*70*7. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product. Keep this manual for future reference.

2. Safety Information

• Ensure all components are present and undamaged before beginning assembly.
• Assemble the table on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly to avoid damaging the wood.
• Keep small parts away from children during assembly.
• Do not stand or sit on the table.
• Distribute weight evenly across the table surface.

3. Package Contents

Verify that all parts listed below are included in your package:

• Tabletop (1)
• Table Legs (4)
• Hardware Pack (screws, washers, Allen wrench)

4. Setup and Assembly

Follow these steps to assemble your dining table:

1. Carefully unpack all components and lay them out on a protected surface.
2. Attach each of the four table legs to the designated corner brackets on the underside of the tabletop. Ensure the legs are oriented correctly.
3. Secure each leg using the provided screws and washers. Hand-tighten initially.
4. Once all legs are attached, gradually tighten all screws using the Allen wrench until secure. Do not overtighten.
5. Carefully turn the table upright. Ensure it is stable and level. Adjust leg levelers if necessary (if included).

Figure 1: Detail of table leg attachment. Ensure secure fastening.

Figure 2: Overall dimensions of the dining table (Length: 120cm, Width: 70cm, Height: 75cm).

5. Operating Instructions

Your SYRIS dining table is designed for indoor use in dining rooms and living areas. To ensure optimal performance and longevity:

• Place the table on a flat, stable surface.
• Avoid placing excessively hot or cold items directly on the tabletop. Use coasters or placemats.
• Do not drag the table when moving it; always lift it to prevent damage to legs and floor.
• The table is designed to support the weight of typical dining items and meals. Avoid placing heavy objects that exceed its structural capacity.

Figure 3: The dining table in use, accommodating multiple individuals.

6. Maintenance and Care

Proper care will help maintain the appearance and durability of your dining table:

• Cleaning: Wipe the table surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the wood finish. Dry immediately with a clean cloth.
• Spills: Clean spills immediately to prevent staining or water damage.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or cracking of the wood.
• Humidity: Maintain a consistent humidity level in the room to prevent wood from expanding or contracting excessively.
• Tighten Fasteners: Periodically check and tighten all screws and fasteners to ensure the table remains stable.

Figure 4: Tabletop surface, illustrating typical use and the 75cm dimension.

7. Troubleshooting

If you encounter any issues with your dining table, refer to the following common problems and solutions:

• Table Wobbles:
  • Ensure all leg screws are securely tightened.
  • Check if the floor surface is even. Use felt pads or shims under the legs if necessary to level the table.
• Scratches on Surface:
  • For minor scratches, wood repair kits or furniture polish may help.
  • Always use placemats or tablecloths to protect the surface from future damage.
• Loose Joints:
  • Re-tighten all assembly hardware. Avoid excessive force.

8. Specifications

Figure 5: Under-table clearance measurement of 66cm.

9. Warranty and Support

For warranty information or technical support, please refer to the retailer or manufacturer's official website. Keep your purchase receipt as proof of purchase.

For further assistance, please contact SYRIS customer service through the platform where the product was purchased.