Zenolix UM02 Dual UHF Wireless Microphone System User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Zenolix UM02 Dual UHF Wireless Microphone System. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

The Zenolix UM02 Dual UHF Wireless Microphone System, including two microphones and the receiver.

Package Contents

Verify that all items listed below are included in your package:

• 1 x UHF Wireless Receiver
• 2 x UHF Wireless Handheld Microphones
• 2 x Anti-slip Rings
• 1 x 6.35mm Audio Cable
• 1 x Charging Cable (for receiver power adapter)
• 1 x Power Adapter
• 2 x Antennas
• 1 x User Manual

Visual representation of the Zenolix UM02 package contents.

Setup Guide

Follow these steps to set up your Zenolix UM02 Wireless Microphone System:

1. Connect the Receiver:
   • Attach the two antennas to the corresponding ports on the back of the receiver.
   • Connect the power adapter to the receiver's DC input and plug it into a wall outlet.
   • Connect the 6.35mm audio cable from the receiver's output to the "MIC IN" input of your amplifier, PA speaker system, karaoke machine, or audio mixer. For professional setups, XLR outputs are also available.
2. Prepare the Microphones:
   • Unscrew the bottom part of each handheld microphone and insert two AA batteries (not included), ensuring correct polarity.
   • Replace the bottom cover.
   • Optionally, place the anti-slip rings on the microphones for added grip and protection.
3. Power On and Pair:
   • Press the power button on the receiver. The LCD display will illuminate.
   • Turn on each handheld microphone using its power switch.
   • The microphones and receiver will automatically pair via IR synchronization. The receiver's display will show the synchronized frequencies for each microphone (VOL A and VOL B).

Visual guide for connecting the Zenolix UM02 system to an audio output device.

The Zenolix UM02 system is compatible with various audio devices, including speakers, amplifiers, and mixers.

Operating Instructions

Microphone Usage

• Power/Mute Switch: Each microphone has a slide switch for On/Mute/Off. Slide to "On" to activate, "Mute" to temporarily silence, and "Off" to power down.
• Battery Indicator: The microphone's display shows the current battery level. Replace batteries when the indicator is low to avoid interruptions.
• Cardioid Pickup: The microphones feature a cardioid pickup pattern, which primarily captures sound from the front, reducing background noise. For best results, speak directly into the top of the microphone.

Key features of the Zenolix handheld microphone, including battery indicator and power switch.

The microphone's cardioid pickup pattern focuses on sound directly in front, minimizing ambient noise.

Receiver Controls

• Power Button: Located on the front panel, used to turn the receiver on or off.
• LCD Display: Shows current frequencies for Microphone A and B, signal strength, and battery status.
• Volume Controls (VOL.A & VOL.B): Separate rotary knobs to adjust the output volume for each microphone independently.
• Channel Selection: Use the +/- buttons to manually adjust frequencies if interference occurs, though automatic scanning is typically sufficient.

The receiver unit features an LCD display for frequency and status, along with individual volume controls.

The system features wide-range automatic scanning for optimal frequency selection.

Optimal Performance Tips

• Maintain a clear line of sight between the microphones and the receiver for best signal stability.
• Avoid placing the receiver near large metal objects or other wireless devices that may cause interference.
• Keep the microphones within the recommended operating range (up to 200 feet) for optimal performance.

The Zenolix UM02 system is suitable for a variety of venues and events.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the microphones and receiver. Do not use liquid cleaners or abrasive materials.
• Battery Care: Remove batteries from the microphones if they will not be used for an extended period to prevent leakage.
• Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Detailed technical specifications for the Zenolix UM02 system.

Warranty and Support

The Zenolix UM02 Wireless Microphone System comes with a 1-year warranty. For any troubleshooting assistance, replacement parts, or customer service inquiries, please contact Zenolix support directly.

You can visit the official Zenolix store on Amazon for more information: Zenolix Store