Signature Design by Ashley M41121

Signature Design by Ashley Limited Edition Plush 12 Inch Hybrid Mattress User Manual

Model: M41121

Product Overview

The Signature Design by Ashley Limited Edition Plush 12 Inch Hybrid Mattress is designed to provide a restorative sleep experience. This mattress combines layers of soft and supportive foam with power-packed wrapped coils to relieve pressure points and offer consistent support.

Key features include high-density foam for support, gel memory foam for pressure relief, and a 4-way stretch knit cover for comfort and durability. The hybrid design ensures low motion transfer and enhanced stability.

Signature Design by Ashley 12 Inch Hybrid Mattress in a bedroom setting

Image: The Signature Design by Ashley 12 Inch Hybrid Mattress placed on a bed frame in a modern bedroom setting, showcasing its plush appearance.

Setup Instructions

Your Signature Design by Ashley mattress arrives conveniently compressed in a box. Follow these steps for easy setup:

  1. Unpack: Carefully remove the mattress from its shipping box. Locate and cut the protective plastic wrap.
  2. Unroll: Place the rolled mattress onto your bed frame or desired foundation. Unroll the mattress, and it will begin to expand.
  3. Expand: Allow a minimum of 48 hours for the mattress to fully expand to its intended size and firmness. During this period, the mattress will decompress and any initial off-gassing odors will dissipate.

Ensure your bed frame or foundation provides adequate support for the mattress to maintain its structural integrity and comfort over time.

Easy setup steps for mattress in a box

Image: A visual guide illustrating the three easy steps for mattress setup: unpack from box, unroll onto bed, and allow to expand for sleep.

Operating and Usage Guidelines

To maximize the lifespan and performance of your mattress, consider the following:

  • Proper Foundation: Always use your mattress on a sturdy, supportive foundation, such as a slatted bed frame with adequate slat spacing, a box spring, or an adjustable base. Inadequate support can lead to premature wear and may void your warranty.
  • Rotation: While not strictly required for hybrid mattresses, rotating your mattress 180 degrees every 3-6 months can help promote even wear and extend its comfort life.
  • Avoid Jumping: Refrain from jumping or standing on the mattress, as this can damage the internal components, including the coils and foam layers.
  • Ventilation: Ensure good air circulation around the mattress, especially if using a platform bed, to prevent moisture buildup.

Maintenance and Care

Proper care will help maintain the quality and hygiene of your mattress:

  • Mattress Protector: It is highly recommended to use a high-quality, waterproof mattress protector from day one. This will shield your mattress from spills, stains, dust mites, and allergens, preserving its cleanliness and extending its life.
  • Spot Cleaning: For minor spills or stains, gently spot clean with a mild soap and water solution. Apply the solution sparingly with a clean cloth, blot the area, and allow it to air dry completely. Do not saturate the mattress.
  • Avoid Harsh Chemicals: Do not use harsh chemical cleaners, bleach, or dry cleaning fluids on your mattress, as these can damage the materials and void the warranty.
  • Vacuuming: Periodically vacuum the surface of the mattress to remove dust and debris.
  • Air Out: Occasionally remove bedding and allow the mattress to air out for a few hours to promote freshness.

Note: The "Hand Wash Only" care instruction found in some product specifications typically refers to removable covers or specific fabric components, not the entire mattress. Always refer to the specific care tag on your mattress for detailed instructions.

Troubleshooting

If you encounter any issues with your mattress, consider the following common solutions:

IssuePossible Cause / Solution
Mattress not fully expandingAllow the full 48 hours for decompression. Cooler temperatures can slow expansion; ensure the room is at a comfortable temperature.
Initial odor (off-gassing)This is normal for new foam products. Ensure good ventilation in the room by opening windows or using a fan. The odor should dissipate within a few days.
Sagging or impressionsEnsure your foundation provides adequate and even support. Check for any damage or weakness in your bed frame or box spring. Body impressions are normal and indicate the mattress conforming to your body; significant sagging may indicate an issue.
Noise from mattressCheck if the noise is coming from the bed frame rather than the mattress. Tighten any loose bolts on your bed frame. If the noise persists and is clearly from the mattress, contact customer support.

Specifications

Detailed specifications for the Signature Design by Ashley Limited Edition Plush 12 Inch Hybrid Mattress (Full size):

FeatureDetail
Product Dimensions74.5" L x 53" W x 12" H (Full Size)
Item Weight69.9 pounds
Model NumberM41121
Fill MaterialGel Memory Foam, High Density Foam
Cover MaterialPolyester (4-way stretch knit)
Number of Layers6
Coil TypePocketed Coil
Special FeaturesLow Motion Transfer, Pressure Relief
ColorWhite
Dimensions of the 12 inch full size mattress

Image: A diagram showing the dimensions of the full size mattress: 53 inches wide, 74.5 inches long, and 12 inches high.

Diagram of mattress layers and components

Image: An exploded view diagram illustrating the six layers of the mattress, including the knit cover, quilt foam, gel lumbar support, plush foam, wrapped coil unit, and base support foam.

Mattress size chart for M411 series

Image: A chart displaying the dimensions for various sizes in the M411 series 12 Inch Signature Design Limited Edition Hybrid mattresses, including Twin, Twin XL, Full, Queen, King, and California King.

Warranty Information

This Signature Design by Ashley mattress comes with a 10-year non-prorated warranty.

Important Note: Purchasing a mattress and foundation from two different brands may void the warranty. Always check the specific warranty details provided with your product for full terms and conditions, especially regarding compatibility with different brands of foundations or box springs.

Customer Support

For further assistance, questions, or warranty claims, please contact Signature Design by Ashley customer service. You can find more information and contact details by visiting the official Signature Design by Ashley store:

Visit Signature Design by Ashley Store

© 2024 Signature Design by Ashley. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.