Introduction
This manual provides instructions for the safe and efficient operation of your XINKORA Automatic Foaming Soap Dispenser. Please read this manual thoroughly before use and retain it for future reference. This touchless dispenser is designed to enhance hygiene and convenience in your home or office.
Safety Information
- Do not immerse the dispenser in water. It is IPX5 waterproof, meaning it can withstand splashes, but not submersion.
- Keep out of reach of children without adult supervision.
- Use only recommended soap types (foaming soap or liquid soap diluted with water).
- Do not attempt to disassemble or repair the unit yourself. Contact support if issues arise.
- Ensure the charging port is completely dry before connecting the USB cable.
Package Contents
- 1 x Automatic Foaming Soap Dispenser
- 1 x USB Charging Cable
- 1 x Wall-Mount Adhesive Hook
- 1 x User Manual (this document)
Product Overview
The XINKORA Automatic Foaming Soap Dispenser is designed for touchless operation, promoting hygiene and convenience. It features an infrared sensor for automatic dispensing and adjustable foam volume.
Image: Key features of the XINKORA Automatic Foaming Soap Dispenser, highlighting its smart infrared sensor, low noise, four foam levels, 400ml capacity, and Type-C charging.
Setup
1. Charging the Dispenser
Before first use, fully charge the dispenser.
- Locate the USB-C charging port on the side of the dispenser.
- Connect the provided USB charging cable to the dispenser and a suitable USB power adapter (not included).
- The battery indicator light will show charging status. A full charge typically takes a few hours.
- Disconnect the cable once fully charged.
2. Filling with Soap
The dispenser is compatible with foaming soap or liquid soap diluted with water.
Image: Instructions for filling the dispenser with soap. Foaming soap can be poured directly. Liquid soap should be diluted with water at a 1:3 or 1:4 ratio to create foam.
- Twist the top section of the dispenser counter-clockwise to separate it from the transparent soap reservoir.
- If using foaming soap, pour it directly into the reservoir.
- If using ordinary liquid soap (e.g., hand soap, dish soap, shampoo), dilute it with water at a ratio of 1 part soap to 3-4 parts water. Gently stir to mix, avoiding excessive bubbles.
- Do not overfill. Ensure there is some space at the top.
- Reattach the top section by aligning and twisting clockwise until secure.
3. Installation
The dispenser can be placed on a countertop or mounted on a wall.
Image: The dispenser shown in two installation methods: wall-mounted using an adhesive hook and standing on a countertop.
Countertop Placement
Simply place the dispenser on a flat, stable surface near a sink.
Wall Mounting
- Clean and dry the desired wall surface thoroughly.
- Peel the protective film from the back of the adhesive wall hook.
- Press the hook firmly onto the wall, ensuring no air bubbles, and hold for 30 seconds.
- Wait at least 24 hours before hanging the dispenser to ensure strong adhesion.
- Align the dispenser's back slot with the hook and slide it down to secure.
Operating Instructions
1. Power On/Off
Press and hold the power button (usually indicated by a power symbol) on the top of the dispenser for 2-3 seconds to turn it on or off. An indicator light will confirm the status.
Image: Detailed view of the dispenser's control panel, showing the power button and foam level indicators. Below, four examples illustrate the increasing foam volume from Level 1 to Level 4.
2. Adjusting Foam Volume
The dispenser offers 4 levels of foam volume.
- With the dispenser powered on, short press the power button to cycle through the foam levels.
- The indicator lights on the top panel will illuminate to show the current level (e.g., one light for Level 1, four lights for Level 4).
- Select the desired foam volume according to your preference.
3. Dispensing Soap
Place your hand flat under the nozzle. The infrared sensor will detect your hand and automatically dispense the selected amount of foam.
Image: The automatic soap dispenser in action, delivering a portion of foam soap into an outstretched hand. A USB charging cable is also visible.
Maintenance
Cleaning
To clean the exterior, wipe with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
For the nozzle, if it becomes clogged, gently wipe it with a damp cloth or a small brush.
Refilling
When the soap level is low, follow the "Filling with Soap" instructions in the Setup section.
Battery Care
Recharge the dispenser when the battery indicator shows low power. Avoid completely draining the battery frequently to prolong its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser does not turn on. | Battery is dead or low. | Charge the dispenser using the provided USB cable. |
| No foam dispensed. | Soap reservoir is empty; sensor is blocked; soap is too thick or not diluted properly. | Refill soap. Ensure nothing is blocking the sensor. If using liquid soap, ensure it is diluted correctly (1:3 or 1:4 with water). |
| Foam is watery or inconsistent. | Soap-to-water ratio is incorrect; low quality soap. | Adjust the soap-to-water ratio (more soap or less water). Consider using a higher quality foaming soap. |
| Dispenser activates unintentionally. | Sensor is too sensitive or something is too close to the sensor. | Ensure there are no objects within 2 inches of the sensor. Try repositioning the dispenser. |
Specifications
- Brand: XINKORA
- Model: P11S
- Color: White+transparent
- Material: Plastic
- Product Dimensions: 2.95"L x 7.87"W x 4.41"H
- Liquid Volume Capacity: 13.5oz / 400ml
- Waterproof Rating: IPX5
- Battery: 1 Lithium Ion battery (included, rechargeable via USB-C)
- Foam Levels: 4 adjustable levels
Image: Product dimensions and key features including long battery life, low battery indicator, and IPX5 waterproof rating.
Warranty and Support
For warranty information or technical support, please contact XINKORA customer service. Refer to your purchase documentation for specific warranty terms.
You can also visit the official XINKORA store on Amazon for more product information and support: XINKORA Store.