AHNR PJ-126PLUS 3-in-1 Cordless Handheld Vacuum Cleaner User Manual

Introduction

This manual provides essential information for the safe and efficient operation of your AHNR PJ-126PLUS 3-in-1 Cordless Handheld Vacuum Cleaner. Please read all instructions carefully before use and retain this manual for future reference.

Safety Information

• Ensure the device is fully charged before first use.
• Do not use the vacuum cleaner to pick up flammable or combustible liquids, hot ashes, or sharp objects.
• Keep the device away from water and do not immerse it in liquids.
• Do not operate the device if it is damaged. Contact customer support for assistance.
• Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
• The machine body is not washable.

Package Contents

Verify that all items are present in the package:

• AHNR PJ-126PLUS Handheld Vacuum Cleaner
• HEPA Filter (pre-installed)
• Metal Filter (pre-installed)
• Brush Nozzles (various types for different uses)
• Long Nozzles (for suction and blowing)
• Type-C Charging Cable
• User Manual

Product Overview

The AHNR PJ-126PLUS is a versatile 3-in-1 cordless device designed for efficient cleaning and air dusting in various environments, including cars and homes.

Key Features:

• 3-in-1 Multi-Function: Functions as a vacuum cleaner, air duster, and inflator.
• Powerful Suction: Equipped with a brushless motor, offering up to 20,000 PA suction power.
• Two Adjustable Modes: Standard mode (12,000 PA) for daily cleaning and Max mode (20,000 PA) for deep cleaning.
• Brushless Motor: Provides 85,000 RPM, reduces wear, and ensures fast heat dissipation for extended lifespan.
• Dual Filtration System: Features a steel mesh filter for large debris and a washable, reusable HEPA filter for fine particles.
• Large Capacity Battery: Built-in 10000mAh battery provides 20-30 minutes of runtime on a full charge.
• Fast Charging: Fully charges in approximately 2.5 hours via Type-C.
• Portable & Lightweight: Weighs only 0.95 lbs, designed for ergonomic, one-handed operation.
• Low Noise Operation: Operates at less than 40dB.

Image: The AHNR PJ-126PLUS handheld vacuum cleaner with its included accessories, showcasing its compact design and multiple attachments for various cleaning tasks.

Setup

1. Unboxing: Carefully remove all components from the packaging.
2. Initial Charge: Before first use, fully charge the vacuum cleaner. Connect the Type-C charging cable to the device and a compatible 5V-2A adapter or USB-A (1-2A current) port. The indicator light will flash red during charging and turn green when fully charged.
3. Filter Installation: Ensure the steel mesh filter and HEPA filter are correctly installed inside the dust cup.
4. Attachment Selection: Choose the appropriate nozzle or brush for your cleaning task. Attach it firmly to either the suction end or the blowing end of the device.

Image: The AHNR PJ-126PLUS charging via its Type-C port, illustrating the indicator lights for charging status. Compatible charging methods are also shown.

Operating Instructions

1. Power On/Off & Mode Selection:

• Press and hold the power button to turn the device on. It will start in Standard mode (12,000 PA).
• Press the power button again to switch to Max mode (20,000 PA) for stronger suction.
• Press and hold the power button to turn the device off.

2. Vacuuming Function:

• Attach the desired suction nozzle (e.g., floor brush, long suction nozzle, or brush attachment) to the front end of the vacuum.
• Turn on the device and move the nozzle over the surface to be cleaned.
• Use the long suction nozzle for crevices and tight spaces.
• The floor brush is ideal for larger flat surfaces like car mats or upholstery.

Image: The AHNR PJ-126PLUS demonstrating its two suction modes (Standard and Max) for different cleaning needs, from dust and hair to sand and beans.

3. Air Duster & Inflator Function:

• Attach the appropriate blowing nozzle (e.g., long blower nozzle or brush attachment) to the rear end of the device.
• Turn on the device. Air will be expelled from the nozzle.
• Use the long blower nozzle to clear dust from keyboards, car vents, or inflate small items like balloons or swim rings.

Image: The AHNR PJ-126PLUS illustrating its dual functionality as both a vacuum cleaner and an air duster, shown cleaning a keyboard and car interior.

Maintenance

1. Emptying the Dust Cup:

• When the dust cup is full, or suction power decreases, it's time to empty it.
• Press the one-touch dust removal button to release the dust cup.
• Empty the contents into a trash bin.

Image: Close-up view of the AHNR PJ-126PLUS's smart lock and one-touch dust removal feature, demonstrating how to easily empty the dust cup without direct contact with debris.

2. Cleaning the Filters:

• Remove the steel mesh filter and the HEPA filter from the dust cup.
• Tap the filters gently to dislodge any loose debris.
• The HEPA filter is washable. Rinse it under running water until clean. Ensure it is completely dry before re-installing.
• The steel mesh filter can also be rinsed and dried.
• Note: The main machine body is not washable.

Image: The dual filtration system of the AHNR PJ-126PLUS, showing the metal filter and washable HEPA filter, with an illustration of rinsing the HEPA filter under water.

Troubleshooting

• No Power: Ensure the device is fully charged. Check the charging cable and adapter.
• Weak Suction: Empty the dust cup and clean both filters. Check for any blockages in the nozzles or the main suction inlet.
• Short Battery Life: Ensure the device is fully charged. Battery performance may decrease over time with prolonged use.
• Unusual Noise: Turn off the device immediately. Check for any foreign objects caught in the motor or fan area.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official AHNR website. Keep your purchase receipt as proof of purchase.