WareLight 2 FT LED Direct/Indirect Suspended Linear Fixture G2 User Manual

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of the WareLight 2 FT LED Direct/Indirect Suspended Linear Fixture G2. This fixture is designed for commercial, retail, and educational spaces, offering adjustable wattage, CCT, and direct/indirect lighting options. Please read this manual thoroughly before installation and retain it for future reference.

Image 1.1: WareLight 2 FT LED Direct/Indirect Suspended Linear Fixture G2, showcasing its sleek black finish and linear design.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• All electrical connections must be made in accordance with local and National Electrical Code (NEC) standards.
• Installation should be performed by a qualified electrician.
• Ensure the supply voltage is compatible with the fixture's requirements (120-277V).
• Do not handle live wires.
• Wear appropriate personal protective equipment (PPE) during installation.
• This fixture is rated for damp locations and indoor use only.

3. Package Contents

Verify that all components are present before beginning installation:

• WareLight 2 FT LED Direct/Indirect Suspended Linear Fixture G2
• 10' Adjustable Hanging Cables (for suspended mounting)
• 10', 5 Wire Power Feed Cable and Canopy
• Optional Wall Mount Kit (if included with your purchase)

4. Product Specifications

Image 4.1: Detailed dimensions of the 2 FT LED linear fixture.

5. Installation Instructions

Before starting, ensure power is disconnected at the circuit breaker. Refer to local electrical codes for proper installation procedures.

5.1 Pre-Installation

1. Unpack the fixture and inspect for any damage.
2. Identify the desired mounting location (suspended or wall mount).
3. Ensure the mounting surface can support the weight of the fixture.

5.2 Mounting Options

The fixture supports both suspended and wall-mounted installations.

Image 5.1: Illustration of suspended and wall mounting options for the linear fixture.

5.2.1 Suspended Mounting

1. Install appropriate ceiling anchors (not included) suitable for the ceiling type and fixture weight.
2. Attach the provided 10' adjustable hanging cables to the fixture and the ceiling anchors.
3. Adjust the cable length to achieve the desired hanging height.

5.2.2 Wall Mounting (Optional)

1. If using the optional wall mount kit, follow the instructions provided with the kit to secure the fixture to the wall.
2. Ensure the fixture is level and securely fastened.

5.3 Electrical Wiring

1. Route the 10', 5-wire power feed cable from the fixture to the junction box.
2. Connect the wires according to the following color code:
   • Black: Line (L)
   • White: Neutral (N)
   • Green: Ground (G)
   • Purple: Dimming (+)
   • Gray: Dimming (-)
3. Secure all connections with appropriate wire connectors.
4. Install the canopy over the junction box to cover wiring.
5. Restore power and test the fixture.

6. Operation

The WareLight G2 fixture offers selectable wattage, CCT, and dimming capabilities to customize your lighting environment.

Image 6.1: Overview of the fixture's key operational features.

6.1 Wattage Selection

The fixture allows you to select between 15W, 20W, 25W, and 30W to adjust brightness and energy consumption. The wattage selection switch is located on the fixture housing. Ensure power is off before adjusting the wattage setting.

6.2 CCT (Correlated Color Temperature) Selection

Choose from four color temperatures: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight). The CCT selection switch is located on the fixture housing. Ensure power is off before adjusting the CCT setting.

Image 6.2: Visual representation of different CCT options (3000K, 3500K, 4000K, 5000K) in an office environment.

Image 6.3: Demonstrates the range of color temperatures from warm (left) to cool (right).

6.3 Dimming

The fixture is 0-10V dimmable. Connect to a compatible 0-10V dimmer switch (sold separately) to adjust light output from 100% down to 10% or lower, depending on the dimmer's capabilities.

6.4 Direct/Indirect Light Adjustment

This fixture provides both downlight (direct) and uplight (indirect) illumination. The direct/indirect fixtures have independently adjustable color temperature for the up and down illumination, and also allow you to select the percentage of up and down light output. Consult the specific instructions on the fixture for adjusting the up/down light distribution.

Image 6.4: Diagram illustrating the up/down light components and examples of light distribution ratios (e.g., 30% UP / 70% DOWN).

7. Maintenance

The WareLight LED fixture requires minimal maintenance. Regular cleaning will help maintain optimal performance and appearance.

7.1 Cleaning

1. Always disconnect power before cleaning.
2. Wipe the exterior surfaces with a soft, damp cloth.
3. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or optical components.
4. Ensure the fixture is completely dry before restoring power.

7.2 Component Replacement

The LED components are integrated and not user-replaceable. If the fixture malfunctions, contact customer support for assistance.

8. Troubleshooting

If you encounter issues with your fixture, refer to the following common problems and solutions:

9. Warranty and Support

The WareLight 2 FT LED Direct/Indirect Suspended Linear Fixture G2 is backed by a 5-year limited warranty against defects in materials and workmanship. This warranty covers normal use and service.

For warranty claims, technical support, or further assistance, please contact WareLight customer service. Keep your purchase receipt as proof of purchase.

For more information about WareLight products, visit the official WareLight Store on Amazon.