HAUSOURCE Queen Bed Frame Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your HAUSOURCE Queen Bed Frame. Please read this manual thoroughly before assembly and retain it for future reference. This bed frame features a sturdy metal platform, a storage headboard with integrated LED lights, and charging ports, designed for a Queen-sized mattress without the need for a box spring.

2. Safety Information

• Always use the provided plastic foot pads to protect your floors from scratches.
• Exercise caution around sharp edges during assembly and use.
• Do not exceed the maximum weight capacity of 1100 pounds (approximately 500 kg).
• Follow all assembly instructions carefully to prevent instability or collapse. Ensure all bolts and fasteners are securely tightened.
• Keep small parts away from children during assembly to prevent choking hazards.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. Refer to the parts list included in your packaging. Typically, your package should contain:

• Metal Frame Components (Side Rails, Support Legs, Crossbars)
• Metal Slats
• Headboard Panels (Medium Density Fiberboard)
• LED Light Strip with Remote Control
• Integrated Power Strip with AC Outlets and USB Ports
• Assembly Hardware (Bolts, Washers, Nuts)
• Assembly Tools (Hex Key, Screwdriver)
• Instruction Manual

4. Assembly Instructions (Setup)

Assembly is designed to be straightforward. All parts are typically numbered, and instructions are clear. A helper may expedite the process, but it can be completed by one person.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Match each part to the corresponding number in the parts list.
2. Assemble the Frame: Connect the side rails and crossbars using the provided hardware. Ensure all connections are secure but do not fully tighten bolts until the frame is fully assembled.
3. Attach Support Legs: Securely attach all central and corner support legs to the frame.
4. Install Headboard: Attach the headboard panels to the frame. Ensure the integrated power strip is correctly positioned.
5. Install Metal Slats: Place the metal slats into the designated slots on the frame. The unique rubber stopper design and non-slip strips help stabilize the bed frame and prevent noise. Ensure each slat is properly seated and secured.
6. Final Tightening: Once the entire frame is assembled, go back and fully tighten all bolts and fasteners.
7. Install LED Lights: Adhere the LED light strip to the designated area on the headboard. Connect it to the power source.
8. Connect Power: Plug the bed frame's power cord into a wall outlet.

Figure 1: Assembled HAUSOURCE Queen Bed Frame (without mattress).

Figure 2: Detail of the special rubber stopper and non-slip strips for noise reduction and stability.

5. Operating Instructions

5.1. LED Headboard Lights

The integrated LED lights offer customizable ambiance for your room. Use the provided RF Wireless remote control to manage the lighting.

• Power On/Off: Press the red power button on the remote.
• Color Selection: Choose from 20 static colors by pressing the corresponding color buttons.
• Dynamic Modes: Select from 22 dynamic modes (e.g., flash, fade, jump) using the "MODE" buttons.
• Speed Adjustment: Adjust the speed of dynamic modes using the "SPEED +" and "SPEED -" buttons.
• Brightness Adjustment: Adjust the brightness of static colors or dynamic modes using the "BRIGHT +" and "BRIGHT -" buttons.

Figure 3: LED lights in operation with remote control.

5.2. Integrated Charging Station

The headboard includes a convenient power strip for charging your devices.

• AC Outlets: Two 120V/12A AC outlets are available for standard electrical devices.
• USB Ports: Two 5V/2A USB ports are available for charging mobile phones, tablets, and other USB-powered devices.
• The power cord for the charging station is approximately 6.5 feet long.

Figure 4: Integrated charging station on the headboard.

6. Features Overview

• Storage Headboard: Provides a convenient shelf for books, electronics, and personal items.
• Under-Bed Storage: The frame design allows for approximately 11 inches of clearance, suitable for storage bins and boxes.
• Noise-Free Design: Equipped with rubber stoppers and non-slip strips on the slats to minimize noise and prevent mattress movement.
• Sturdy Metal Construction: Durable metal frame provides strong support for your mattress.
• No Box Spring Needed: Designed with robust metal slats to support your mattress directly.
• Fixed Mattress Design: Embedded design at the edges helps prevent the mattress from slipping out.

Figure 5: Under-bed storage space.

Figure 6: Fixed mattress design for stability.

7. Maintenance

• Cleaning: Wipe the metal frame and headboard surfaces with a soft, damp cloth. Avoid harsh chemicals that may damage the finish.
• Fastener Check: Periodically check all bolts and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
• LED Lights: If the LED lights malfunction, check the power connection and the remote control battery.

8. Troubleshooting

9. Specifications

Figure 7: Product dimensions.

10. Customer Support

For any questions, missing parts, or assistance with assembly or operation, please contact HAUSOURCE customer support. Refer to your purchase documentation for specific contact details or visit the HAUSOURCE brand store on Amazon.

Online Support: Visit the HAUSOURCE Store on Amazon