Te-Rich Wake Up Light Sunrise Alarm Clock ZH139 User Manual

1. Introduction

Thank you for choosing the Te-Rich Wake Up Light Sunrise Alarm Clock, Model ZH139. This device is designed to provide a gentle and natural wake-up experience through sunrise simulation and customizable alarm settings. It also functions as a night light with various color options and a dimmable display. Please read this manual carefully before use to ensure proper operation and to maximize your experience with the product.

2. Safety Information

• Do not immerse the device in water or other liquids.
• Use only the provided power adapter.
• Keep the device away from heat sources and direct sunlight.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
• This device is intended for indoor use only.

3. Package Contents

• Te-Rich Wake Up Light Sunrise Alarm Clock (Model ZH139)
• USB Power Cable
• User Manual

4. Product Overview

Familiarize yourself with the main components and controls of your Te-Rich Wake Up Light.

Front view of the Te-Rich Wake Up Light Sunrise Alarm Clock, showing the digital display and control buttons.

Control Buttons:

• TIME/DIMMER: Press to set time, hold to adjust display brightness.
• ALARM1: Press to set Alarm 1, hold to activate/deactivate.
• ALARM2: Press to set Alarm 2, hold to activate/deactivate.
• +: Increase value, navigate menus.
• -: Decrease value, navigate menus.
• Top Surface: Tap for snooze function.

5. Setup

5.1 Power Connection

1. Connect the USB power cable to the port on the back of the alarm clock.
2. Plug the other end of the USB cable into a compatible USB power adapter (not included) and then into a wall outlet.
3. The display will light up, indicating the device is powered on.

5.2 Battery Backup Installation

The device requires 2 AAA batteries (not included) for backup power. This ensures time and alarm settings are retained during a power outage.

1. Open the battery compartment cover on the bottom of the clock.
2. Insert 2 AAA batteries, observing the correct polarity (+/-).
3. Close the battery compartment cover securely.

This image illustrates the 9-minute snooze function and highlights the battery backup capability of the alarm clock.

5.3 Setting the Time

1. Press the TIME/DIMMER button once. The hour digits will flash.
2. Use the + or - buttons to adjust the hour.
3. Press TIME/DIMMER again. The minute digits will flash.
4. Use the + or - buttons to adjust the minutes.
5. Press TIME/DIMMER a third time to confirm the time.
6. To switch between 12-hour and 24-hour format, press the + button while the time is flashing during setup.

6. Operating Instructions

6.1 Setting Alarms (Dual Alarm & 7-5-2 Modes)

The clock supports two independent alarms and offers flexible scheduling options (Everyday, Weekday, Weekend).

This image demonstrates the dual alarm functionality and the 7-5-2 day modes (Mon-Sun, Mon-Fri, Sat-Sun) for personalized wake-up routines.

1. To Set Alarm 1: Press the ALARM1 button once. The alarm hour will flash.
2. Use + or - to adjust the hour, then press ALARM1 to confirm.
3. Adjust minutes with + or -, then press ALARM1.
4. Select the alarm schedule (7 for Mon-Sun, 5 for Mon-Fri, 2 for Sat-Sun) using + or -, then press ALARM1.
5. Choose the wake-up sound (e.g., nature sounds, beep) using + or -, then press ALARM1.
6. Adjust the sound volume using + or -, then press ALARM1 to save.
7. To Set Alarm 2: Follow the same steps using the ALARM2 button.
8. To Activate/Deactivate Alarm: Hold down the ALARM1 or ALARM2 button until the alarm icon appears/disappears on the display.

6.2 Sunrise Simulation

The sunrise simulation feature gradually brightens the light before your set alarm time, mimicking a natural sunrise.

This image illustrates the gradual sunrise simulation, showing the clock's light increasing in brightness over time, from 6:00 AM to 7:00 AM, to gently wake a sleeping child.

• When setting an alarm, you can choose the duration of the sunrise simulation (e.g., 10, 20, 30, 40, 50, 60 minutes).
• The light will begin to brighten at the selected duration before your alarm time, reaching full brightness at the alarm time.

6.3 Night Light & Color Changing Functions

The clock can function as a night light with various color options and adjustable brightness.

This image demonstrates the color-changing night light feature, showcasing 7 solid colors and 2 dynamic color modes, along with 10 brightness levels (L01 to L10).

1. To turn on the night light, press the light button (usually located on the side or top, refer to product diagram if available).
2. Press the light button repeatedly to cycle through different colors (e.g., Warm White, Yellow, Cold White, Red, Green, Blue, Purple, RGB Breathing, RGB Cycling).
3. Use the + or - buttons to adjust the brightness level (L01 to L10) of the selected color.
4. To turn off the night light, continue pressing the light button until the light turns off, or hold the light button.

6.4 Dimmable Display

The digital time display has multiple brightness levels, including an off option, to suit your preference.

This image illustrates the four levels of dimmable display: 100%, 60%, 20% brightness, and completely off, allowing users to adjust visibility according to their needs.

• Hold down the TIME/DIMMER button to cycle through the display brightness levels (100%, 60%, 20%, Off). Release the button at your desired brightness.

6.5 Snooze Function

When an alarm sounds, you can activate the snooze function for an additional 9 minutes of rest.

• When the alarm sounds, gently tap the top surface of the alarm clock.
• The alarm will pause for 9 minutes and then sound again.
• You can repeat the snooze function multiple times.
• To turn off the alarm completely, press any button under the display screen (e.g., ALARM1, ALARM2, +, -).

7. Maintenance

• Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the device is unplugged before cleaning.
• Store the device in a cool, dry place when not in use for extended periods.

8. Troubleshooting

8.1 Clock not turning on or display is blank.

• Ensure the USB power cable is securely connected to both the clock and a working power adapter/outlet.
• Check if the power outlet is functional.
• If using battery backup, ensure batteries are inserted correctly and are not depleted. Note that batteries only maintain settings, they do not power the main display or light functions.

8.2 Alarm does not sound or light up.

• Verify that the alarm is activated (alarm icon visible on display).
• Check the alarm time and ensure it is set correctly.
• Ensure the alarm volume is not set to zero.
• Confirm the alarm schedule (7-5-2 modes) matches your desired wake-up days.

8.3 Display is too bright or too dim.

• Hold down the TIME/DIMMER button to adjust the display brightness.

8.4 Night light is not working or changing colors.

• Press the light button to turn on the night light and cycle through colors.
• Use the + or - buttons to adjust the brightness of the night light.

9. Specifications

10. Warranty and Support

Te-Rich products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided with your purchase or visit the official Te-Rich website. Please retain your proof of purchase for warranty claims.