Peslief Wireless Tattoo Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Peslief Wireless Tattoo Kit. Please read all instructions carefully before operating the device. Proper understanding and adherence to these guidelines will ensure optimal performance and longevity of your equipment.

2. Safety Information

Important: This product is intended for professional use or for practice on synthetic skin. If used on human skin, strict hygiene and sterilization protocols must be followed to prevent infection and other health risks. Consult with a qualified professional for proper tattooing techniques and safety standards.

• Always wear disposable gloves during setup, operation, and cleaning.
• Ensure all needles and ink cups are sterile and for single-use only.
• Dispose of used needles and other contaminated materials in appropriate sharps containers.
• Keep the tattoo machine and power supply dry. Avoid contact with water.
• Do not operate the machine if any components are damaged.
• Keep out of reach of children.

3. Package Contents

Verify that all items listed below are included in your Peslief Wireless Tattoo Kit:

• 1 x Tattoo Pen
• 1 x Wireless Power Supply
• 1 x Charging Cable
• 20 x Ink Cups
• 1 x 30ML Black Tattoo Ink
• 10 x Colored Tattoo Inks
• 1 Pair Disposable Tattoo Gloves
• 10 x Tattoo Cartridge Needles (5x 3RL, 5x 7RM)
• 1 x Tattoo Grip Cover
• 1 x Tattoo Scar Repair Gel
• 1 x 30ML Green Soap
• 1 x Practice Skin
• 5 x Tattoo Transfer Papers

Image: Overview of all components included in the Peslief Wireless Tattoo Kit.

4. Setup Instructions

4.1 Charging the Wireless Power Supply

1. Connect the charging cable to the wireless power supply.
2. Plug the other end of the charging cable into a suitable USB power adapter (not included).
3. The power supply takes approximately 2-4 hours to fully charge. A full charge provides 2-6 hours of working time.

Image: The wireless power supply with indicators for battery capacity, charging time, and working time.

4.2 Assembling the Tattoo Pen

1. Ensure the tattoo pen is clean and disinfected.
2. If desired, wrap the tattoo grip cover around the pen's grip for comfort and hygiene.
3. Twist the wireless power supply onto the top of the tattoo pen until securely attached. Alternatively, use an RCA cable for wired operation.
4. Carefully insert a sterile cartridge needle into the front of the tattoo pen. Twist to lock it into place.

Image: Illustration of the two operational modes: wired via RCA cable and wireless with the attached power supply.

4.3 Preparing for Tattooing

1. Pour a small amount of tattoo ink into a clean, disposable ink cup.
2. If using transfer paper for a design, clean and dry the practice skin area. Place the tattoo design face down on the practice skin. Apply transfer paper over the design and rub firmly. Lift the transfer paper to reveal the transferred design. Allow the transfer to dry before proceeding.

5. Operating Instructions

5.1 Powering On/Off and Voltage Adjustment

1. To power on the wireless power supply, press and hold the power switch button.
2. Use the '+' and '-' buttons to adjust the working voltage between 5V and 12V. The motor speed is 10V/10000rpm.
3. To power off, press and hold the power switch button again.

5.2 Adjusting Needle Depth

The tattoo pen allows for adjustable needle depth. Rotate the grip of the tattoo pen clockwise or counter-clockwise to achieve the desired needle protrusion. This adjustment is crucial for different tattooing techniques and skin types.

Image: The tattoo pen's front section illustrating the mechanism for adjusting needle depth.

5.3 Tattooing Process (Practice Skin)

1. Dip the needle into the ink cup, allowing the needle to draw up ink.
2. Begin tattooing on the practice skin, following your design. Maintain a consistent hand speed and pressure.
3. Regularly dip the needle into the ink cup to ensure continuous ink flow.

Image: A gloved hand demonstrating the use of the tattoo pen on a piece of practice skin.

6. Maintenance

6.1 Cleaning the Tattoo Pen

• After each use, disconnect the power supply and remove the needle cartridge.
• Wipe down the exterior of the tattoo pen with a disinfectant wipe or a cloth dampened with green soap solution.
• Do not submerge the tattoo pen or power supply in liquid.
• Store the cleaned tattoo pen in a dry, sterile environment.

7. Troubleshooting

• Machine not turning on: Ensure the wireless power supply is fully charged. Check that it is securely attached to the tattoo pen.
• Inconsistent ink flow: Verify that the needle cartridge is properly seated and not clogged. Ensure the needle is adequately dipped in ink.
• Excessive vibration or noise: Check for any loose components. Ensure the needle cartridge is correctly installed.
• Needle not moving: Confirm the power supply is on and the voltage is set. Check for any obstructions in the needle mechanism.

8. Specifications

9. Warranty and Support

For any questions regarding your Peslief Wireless Tattoo Kit, please contact our customer service. We are committed to providing satisfactory after-sales support and will respond to your inquiries as soon as possible.

Note: Specific warranty details may vary. Please refer to your purchase documentation or contact customer support for precise warranty terms.