Introduction
This manual provides essential information for the safe and effective use of your Generic AC DC Adapter Charger, designed for compatibility with Philips HP6509 and HP6509/01 Satinelle Epilator models. Please read these instructions carefully before use and retain them for future reference.
Important Safety Information
- Ensure the adapter is used only with compatible devices as specified in this manual.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to disassemble or repair the adapter. Refer to customer support for assistance.
- Unplug the adapter from the power outlet when not in use or during electrical storms.
- Keep out of reach of children.
Setup
1. Compatibility Check
Before connecting, verify that your device is a Philips HP6509 or HP6509/01 Satinelle Epilator. This adapter is designed to fit these models exclusively. If your model is not listed, please confirm compatibility with the seller before use.
2. Connecting the Adapter
- Insert the barrel connector end of the adapter cable into the charging port of your Philips HP6509 or HP6509/01 epilator.
- Plug the AC power plug of the adapter into a standard 100V - 240V wall outlet.
Image: The AC DC Adapter Charger showing the main unit and the barrel connector. This illustrates the components involved in connecting the device.
Operating Instructions
Charging Your Device
Once connected, the adapter will begin to supply power to your Philips epilator. A small LED indicator light on the adapter unit will illuminate, typically red, to confirm that power is being supplied. The adapter operates with an input voltage range of 100V to 240V, making it suitable for worldwide use.
Image: A graphic highlighting the 5-foot cable length and the presence of an LED indicator light on the adapter.
The adapter features built-in protections including Over Voltage Output Protection, Over Current Output Protection, and Short Circuit Output Protection to ensure safe operation.
Image: The adapter plugged into a power strip, illustrating its use and highlighting its premium components, multipurpose design, stable output, and safety protections.
Maintenance
Cleaning
To clean the adapter, unplug it from the power outlet and your device. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Storage
Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid tightly winding the cable to prevent damage.
Troubleshooting
- Device Not Charging: Ensure the adapter is securely plugged into both the wall outlet and the epilator. Check if the LED indicator on the adapter is lit. Try a different wall outlet.
- Adapter Not Working: If the LED indicator does not light up, the adapter may not be receiving power or may be faulty.
- Battery Issues: Rechargeable batteries have a limited lifespan (typically 1 to 3 years). If your epilator's battery is old or dead, it may not accept a charge, which is not an issue with the charger itself. To determine if the charger is functioning, a voltmeter can be used to test its output.
- Overheating: If the adapter feels excessively hot, unplug it immediately and discontinue use. Contact customer support.
If you are unsure about the cause of a problem or require further assistance, please contact customer support.
Specifications
- Input: 100V - 240V AC, 50/60Hz
- Output Current: 2 Amps
- Cable Length: 5 feet (approximately 1.5 meters)
- Connector Type: Barrel Connector
- Compatible Devices: Philips HP6509, HP6509/01 Satinelle Epilator
- Product Dimensions: 2 x 2 x 3 inches
- Item Weight: 4 ounces
- Color: Black
- Special Feature: Travel-friendly design
- Safety Certification: CE
Customer Support
For any questions, concerns, or troubleshooting assistance not covered in this manual, please contact the seller through the Amazon messaging system. Provide your order details and a clear description of the issue for prompt support.
