FabStyl ALOLP1 Solar Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your FabStyl ALOLP1 Solar Light. This product is designed for both indoor and outdoor use, offering high brightness, multiple color temperatures, and various lighting modes, powered by solar energy.

2. Safety Information

• Ensure all components are securely fastened during installation to prevent accidental falls.
• Do not attempt to disassemble or modify the solar panel or light unit, as this may void the warranty and pose safety risks.
• Keep the solar panel clean to ensure optimal charging efficiency.
• Avoid placing the solar panel in shaded areas, as this will reduce its ability to charge.
• This product contains lithium polymer batteries. Dispose of batteries according to local regulations.

3. Package Contents

Verify that all items are present in your package:

• FabStyl ALOLP1 Solar Light Unit (Double Heads)
• Solar Panel with 16.4ft Extension Cord
• Remote Control
• Mounting Hardware (screws, anchors)
• Instruction Manual (this document)

4. Setup and Installation

The FabStyl ALOLP1 Solar Light is designed for easy installation with a separate solar panel for flexible placement.

4.1 Choosing an Installation Location

• Solar Panel: Select a location that receives direct sunlight for at least 6-8 hours daily. Avoid areas under trees, eaves, or other obstructions that may cast shadows. The solar panel can be mounted on a rooftop or wall.
• Light Unit: The light unit can be installed indoors (e.g., shed, garage, chicken coop, basement) or outdoors (e.g., patio, gazebo, barn). The 16.4ft extension cord allows for flexible placement of the light unit away from the solar panel.

Image: Proper and improper installation locations for the solar panel. Ensure direct sunlight exposure for optimal charging.

4.2 Mounting Steps

1. Mount the Solar Panel: Use the provided screws and anchors to securely mount the solar panel in your chosen sunny location. Adjust the angle to maximize sun exposure.
2. Mount the Light Unit: Attach the light unit to your desired indoor or outdoor ceiling or wall using the appropriate mounting hardware.
3. Connect the Cables: Connect the extension cord from the solar panel to the light unit. Ensure the connection is secure and waterproof.

Image: Step-by-step guide for installing the light unit and connecting it to the solar panel.

5. Operating Instructions

Your FabStyl ALOLP1 Solar Light features multiple lighting modes and color temperatures, controllable via the included remote.

5.1 Remote Control Functions

The remote control allows you to switch between modes, adjust color temperature, and set timers.

5.2 Color Temperature Settings

The light offers three adjustable color temperatures to suit different environments and preferences:

• 2700K (Warm Light): Ideal for creating a cozy and inviting atmosphere.
• 4500K (Neutral Light): Provides a balanced, natural white light suitable for general illumination.
• 6500K (Cool Light): A bright, crisp white light for enhanced visibility and security.

Image: Visual representation of the three available color temperatures: Warm (2700K), Neutral (4500K), and Cool (6500K).

Image: Examples of 6500K (Cool Light) in a garage, 4500K (Neutral Light) on a patio, and 2700K (Warm Light) on a porch and in a chicken coop.

5.3 Lighting Modes

The light offers five distinct lighting modes to meet diverse needs:

1. Mode 1 (Dim to Bright with Motion - Night): The light stays dim at night and brightens to full intensity when motion is detected.
2. Mode 2 (Off to Bright with Motion - Night): The light remains off at night and turns on to full intensity when motion is detected.
3. Mode 3 (Always-On - Night): The light stays on continuously at a set brightness level throughout the night.
4. Mode 4 (Off to Bright with Motion - Daytime): The light remains off during the day and turns on to full intensity when motion is detected. Useful for dark indoor spaces like tool rooms.
5. Mode 5 (Always-On - Daytime): The light stays on continuously at a set brightness level throughout the day. Useful for consistent illumination in areas like chicken coops.

Image: Visual guide to the five lighting modes and timer settings (2H/4H/6H).

Image: The light providing illumination in a dark tool room during the daytime, demonstrating Mode 4 or Mode 5 functionality.

5.4 Motion Sensor and Timer Settings

The integrated motion sensor has a 120° detecting angle and a detection distance of up to 32.8ft. You can adjust the induction lighting time (the duration the light stays on after motion is detected) to 25s, 35s, or 45s. The default induction lighting time is 15s.

Image: Illustration of the motion sensor's detection angle and distance, along with options for adjusting the light duration after motion.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your solar light.

• Clean the Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Check Connections: Occasionally inspect the cable connections between the solar panel and the light unit to ensure they remain secure and free from corrosion.
• Inspect for Damage: Check the light unit and solar panel for any physical damage, especially after severe weather conditions.

7. Troubleshooting

If you encounter issues with your FabStyl ALOLP1 Solar Light, refer to the following troubleshooting guide:

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact FabStyl customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.