Oklagarden Grill Replacement Parts Instruction Manual

1. Introduction and Overview

This manual provides instructions for the installation, maintenance, and troubleshooting of Oklagarden grill replacement parts, specifically heat shields (flame tamers) and burner tubes. These parts are designed to restore optimal performance to your Outdoor Gourmet gas grill by ensuring even heat distribution and protecting internal components.

Image 1.1: Oklagarden Heat Shield and Burner Tube Replacement Parts.

2. Product Components

Your package includes the following components:

• 6 pieces of Heat Shields (Flame Tamers): 15 inches (L) x 3 13/16 inches (W)
• 6 pieces of Stainless Steel Burner Tubes: 16 1/4 inches (L)

Image 2.1: Dimensions of the included heat shield and burner tube.

3. Compatibility

These replacement parts are compatible with various Outdoor Gourmet grill models. Please verify your grill's model number and part dimensions before installation.

Compatible 6-Burner Grill Models:

• GR2205723-OG-00
• GR2205720-OG-00
• FSOGBG1108
• 162193
• GR2215101-OG-00
• Rankam GR2205720-OG-00

Compatible 5-Burner Grill Models:

• FSOGBG1107
• GR2323101-OG-00
• GR2205520-OG-00
• GR2205501-OG-00

Compatible Original Part Numbers:

• Gas-6b0001 grill burner
• 12061
• UFHP2
• MET-6B000

Image 3.1: Example of heat tents installed in a grill.

4. Setup and Installation

Follow these steps to safely replace your grill's heat shields and burner tubes:

1. Safety First: Ensure your grill is completely cool and disconnected from its gas supply before beginning any installation or maintenance.
2. Remove Grill Grates and Existing Parts: Carefully remove the cooking grates and any existing heat shields or burner tubes. Note their original positions for correct reassembly.
3. Install New Burner Tubes: Place the new stainless steel burner tubes into their designated slots. Ensure they are securely seated and properly aligned with the gas manifold. The burner tubes feature adjustable air shutters for fine-tuning the flame.
4. Install New Heat Shields: Position the new porcelain-enameled heat shields over the installed burner tubes. Ensure they cover the burners adequately to distribute heat and protect them from drippings.
5. Reassemble Grill: Once all replacement parts are in place, reinstall the cooking grates.
6. Leak Test: After reattaching the gas supply, perform a leak test according to your grill manufacturer's instructions before lighting the grill.

Image 4.1: Stainless steel burner tube with adjustable air shutters and even fire outlet holes.

Image 4.2: Durable porcelain-enameled heat shield.

5. Operating Principles

These replacement parts are designed to enhance your grilling experience:

• Heat Shields (Flame Tamers): Constructed from thickened porcelain-enameled steel, these heat shields disperse heat evenly across the cooking surface. They also protect the burner tubes from grease drippings, which vaporize upon contact, adding smoky flavor to your food.
• Burner Tubes: Made from stainless steel, the burner tubes feature evenly spaced fire outlet holes to ensure a consistent and uniform flame. This design promotes even cooking and efficient fuel usage.

6. Maintenance

Regular maintenance extends the life of your grill parts and ensures optimal performance:

• Cleaning Heat Shields: Allow the grill to cool completely. Scrape off any accumulated grease or food residue with a plastic scraper or stiff brush. For stubborn stains, use a grill cleaner and rinse thoroughly. The porcelain enamel surface is designed for easy cleaning.
• Cleaning Burner Tubes: Periodically inspect burner tubes for clogged ports. Use a wire brush or a stiff wire to clear any blockages. Ensure the air shutters are free of debris.
• Inspection: Regularly inspect both heat shields and burner tubes for signs of corrosion, cracks, or excessive wear. Replace parts if significant damage is observed to maintain safe and efficient operation.

Image 6.1: Comparison of old, rusted heat shields versus new, anti-corrosion Oklagarden heat shields.

7. Troubleshooting

Uneven Heating:

Possible Cause: Clogged burner ports or improperly positioned heat shields.
Solution: Clean burner ports as described in the Maintenance section. Ensure heat shields are correctly placed over the burners.

Weak or Irregular Flame:

Possible Cause: Clogged burner ports, issues with gas flow, or incorrect air shutter adjustment.
Solution: Clean burner ports. Check gas supply and connections. Adjust air shutters on the burner tubes to achieve a stable blue flame.

Excessive Flare-ups:

Possible Cause: Excessive grease buildup on heat shields or cooking grates.
Solution: Clean heat shields and cooking grates thoroughly. Ensure proper ventilation in the grill.

8. Specifications

Package Dimensions: 16.38 x 4.53 x 3.74 inches

Item Weight: 6.03 pounds

Manufacturer: Oklagarden

Image 8.1: Features of the heat shield: high temperature resistant, easy to clean, durable, and not easily deformed.

9. Warranty and Support

For any questions regarding installation, compatibility, or product performance, please contact Oklagarden customer support. Refer to your original purchase documentation or the seller's information for specific warranty details.

Oklagarden is committed to providing durable and matching grill parts for an enjoyable barbecue experience.