BENYAR Automatic Mechanical Watch User Manual

Introduction

Thank you for choosing the BENYAR Automatic Mechanical Watch. This timepiece is designed with precision and elegance, featuring a skeleton dial that showcases its intricate internal mechanism. Powered by your movement, this watch offers reliable timekeeping without the need for a battery. This manual provides essential information for the proper setup, operation, maintenance, and care of your new watch.

Image: Front view of the BENYAR Automatic Skeleton Watch, highlighting its intricate dial and leather strap.

Setup

Your BENYAR automatic watch is powered by the natural motion of your wrist. For initial setup or if the watch has stopped due to inactivity, follow these steps:

1. Initial Winding: If the watch has completely stopped, gently rotate the crown clockwise about 20-30 times while it is in the normal (pushed-in) position. This will provide enough power reserve to start the movement.
2. Setting the Time:
   • Pull the crown out to the first position.
   • Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
   • Once the time is set, push the crown back into its normal position.
3. Wearing the Watch: Wear the watch regularly. The natural motion of your arm will keep the mainspring wound, ensuring continuous operation. If worn daily for 8-10 hours, manual winding should not be necessary.

Operating Features

Automatic Movement

The BENYAR watch features an automatic mechanical movement (G3265Z). This means it is self-winding and does not require a battery. The rotor inside the watch moves with your wrist, winding the mainspring and powering the watch. When fully wound, the watch has a power reserve that allows it to continue running for a period even when not worn.

Skeleton Dial

The transparent skeleton dial allows you to observe the intricate gears, springs, and balance wheel of the mechanical movement in action. This design is both aesthetically pleasing and a testament to traditional watchmaking.

Luminous Dial

The watch dial features luminous elements that glow in low-light conditions, allowing for easy time reading in the dark. Exposure to light charges these luminous markers.

Image: The watch dial illuminated in a dark environment, demonstrating its luminous feature for visibility.

Maintenance and Care

Water Resistance (50M)

Your BENYAR watch is rated for 50 meters (5 ATM) of water resistance. This means it is suitable for short periods of recreational swimming or showering. However, please observe the following important precautions to prevent water damage:

• Do NOT press any buttons or pull the crown while the watch is wet or submerged in water.
• Avoid exposing the watch to steam or hot water, such as during hot baths or in saunas. Extreme temperature changes can compromise the water seals.
• Do NOT wear this watch while diving or engaging in high-impact water sports.
• Avoid prolonged exposure to water. Excessive water exposure will shorten the life of the watch.
• Always ensure the crown is fully pushed in before any contact with water.

Cleaning

To maintain the appearance of your watch:

• Wipe the case and crystal with a soft, dry, lint-free cloth.
• For the genuine leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals. Clean with a damp cloth and mild soap if necessary, then allow to air dry completely.

Storage

When not wearing the watch for extended periods, store it in a cool, dry place away from direct sunlight and strong magnetic fields. For automatic watches, a watch winder can be used to keep the movement running and lubricated.

Image: A close-up view of the BENYAR watch being worn on a wrist, demonstrating its fit and design during typical use.

Troubleshooting

Specifications

Image: Technical diagram illustrating the key dimensions of the watch, including dial diameter, case thickness, and strap width.

Warranty and Support

Your BENYAR Automatic Mechanical Watch comes with a 1-year warranty service from the date of purchase, covering manufacturing defects. Additionally, a 60-day refund policy is offered. Please retain your original watch box, instruction manual, and warranty card for any claims.

For warranty claims, technical support, or any inquiries regarding your watch, please contact the seller or manufacturer directly through the platform where the purchase was made. Provide your purchase details and a clear description of the issue to facilitate prompt assistance.

Note: The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear. Please refer to the "Maintenance and Care" section for guidelines on proper handling and water resistance limitations.