Generic LH-X50 6-Axis Gyro Quadcopter User Manual

1. Introduction and Safety Information

Thank you for purchasing the Generic LH-X50 6-Axis Gyro Quadcopter. This manual provides essential instructions for safe operation, setup, and maintenance of your new drone. Please read this manual thoroughly before operating the quadcopter and retain it for future reference.

Important Safety Precautions:

• Always operate the quadcopter in open, unobstructed areas, away from people, animals, and obstacles.
• Do not operate near high-voltage lines, airports, or restricted airspace.
• Keep fingers, hair, and loose clothing away from rotating propellers.
• Adult supervision is recommended for users under 14 years of age.
• Do not fly in strong winds or adverse weather conditions.
• Ensure the battery is fully charged before each flight.
• Never leave charging batteries unattended.
• Turn off the quadcopter and remote control when not in use.

2. Package Contents

Please check the package contents to ensure all items are present:

• 1 x LH-X50 Quadcopter
• 1 x Remote Transmitter
• 1 x USB Charging Cable
• 1 x Rechargeable Li-Po Battery (for Quadcopter)
• 4 x Spare Propellers
• 1 x User Manual (this document)

Image: Contents of the LH-X50 Quadcopter package, including the drone, remote control, and accessories.

3. Component Identification

3.1 Quadcopter Components

• Propellers: Four rotating blades for lift and thrust.
• Motor: Powers each propeller.
• LED Lights: Indicate orientation and battery status.
• Battery Compartment: Houses the rechargeable Li-Po battery.
• Power Switch: Turns the quadcopter on/off.

3.2 Remote Transmitter Components

• Left Stick (Throttle/Yaw): Controls altitude (up/down) and rotation (left/right).
• Right Stick (Directional): Controls forward/backward and left/right movement.
• Trim Buttons: Adjust for stable flight (e.g., forward/backward trim, left/right trim).
• 360° Flip Button: Activates the flip function.
• Power Indicator Light: Shows if the transmitter is on.
• Power Switch: Turns the transmitter on/off.
• Battery Compartment: For AA batteries.

Image: The LH-X50 Quadcopter as seen in its retail packaging, highlighting its design and propeller guards.

4. Setup

4.1 Charging the Quadcopter Battery

1. Connect the quadcopter battery to the USB charging cable.
2. Plug the USB charging cable into a USB power source (e.g., computer USB port, USB wall adapter).
3. The charging indicator light on the USB cable will illuminate during charging and turn off (or change color) when fully charged.
4. Charging time is approximately 60 minutes. For optimal performance, ensure a full charge of at least 40 minutes before first use.
5. Do not overcharge the battery. Disconnect once fully charged.

4.2 Installing Transmitter Batteries

1. Open the battery compartment on the back of the remote transmitter.
2. Insert 4 x 1.5V AA batteries (not included), ensuring correct polarity (+/-).
3. Close the battery compartment securely.

4.3 Propeller Installation (if required)

The quadcopter typically comes with propellers pre-installed. If replacement is needed:

• Identify the correct propeller type (A or B) for each motor. Propellers are usually marked.
• Carefully push the propeller onto the motor shaft until it is secure. Ensure it spins freely.

5. Operating Instructions

5.1 Pairing the Quadcopter with the Transmitter

1. Place the quadcopter on a flat, level surface.
2. Turn on the quadcopter's power switch. The LED lights will flash.
3. Turn on the remote transmitter's power switch.
4. Push the left stick (throttle) all the way up, then all the way down.
5. The quadcopter's LED lights will stop flashing and remain solid, indicating successful pairing.

5.2 Basic Flight Controls

• Take-off: After pairing, gently push the left stick (throttle) upwards to lift off.
• Landing: Gently pull the left stick (throttle) downwards until the quadcopter lands.
• Altitude Control (Left Stick Up/Down): Increases or decreases the quadcopter's height.
• Yaw Control (Left Stick Left/Right): Rotates the quadcopter clockwise or counter-clockwise.
• Forward/Backward (Right Stick Up/Down): Moves the quadcopter forward or backward.
• Left/Right Sideways Flight (Right Stick Left/Right): Moves the quadcopter left or right sideways.

5.3 360-Degree Rolling Function

1. Ensure the quadcopter is flying at a sufficient height (at least 3 meters).
2. Press the 360° Flip button on the transmitter.
3. Immediately push the right stick in the desired direction (forward, backward, left, or right) to perform a flip.

5.4 Headless Mode

Headless mode allows the quadcopter to fly according to the orientation of the pilot, regardless of the drone's front direction. Refer to the transmitter's specific button for activating/deactivating headless mode.

Flight Time: Approximately 5-10 minutes per charge.

Control Distance: Up to 40 meters.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the quadcopter and transmitter. Do not use water or solvents.
• Propellers: Inspect propellers for damage after each flight. Replace any bent or broken propellers with spare parts.
• Storage: Store the quadcopter and transmitter in a cool, dry place, away from direct sunlight. Remove batteries from the transmitter if storing for extended periods.
• Battery Care: Do not puncture, short-circuit, or expose the Li-Po battery to extreme temperatures.

7. Troubleshooting

8. Specifications

• Brand: Generic
• Model Name: LH-X50 (X50)
• Control Frequency: 2.4 GHz
• Gyroscope: 6-Axis Gyro
• Channels: 4 Channel
• Quadcopter Battery: 4.7V 380 mAh Li-Po
• Transmitter Battery: 4 x 1.5V AA (not included)
• Charging Time: Approximately 60 minutes
• Flight Time: 5-10 minutes
• Control Distance: Up to 40 meters
• Special Features: 360-degree Flip, Headless Mode, LED Lights
• Material: Plastic
• Product Dimensions: 40L x 40W x 8.5H Centimeters

9. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer.

If you encounter any issues or require technical assistance, please contact the seller or manufacturer directly. Please have your product model number (LH-X50) and purchase information ready when seeking support.