1. Introduction
The Philips Norelco OneBlade 360 with Connectivity Face + Body is a versatile hybrid styler designed for trimming, shaving, and creating precise lines and edges on any hair length. It features advanced OneBlade technology with a fast-moving cutter (12,000x per minute) and a dual protection system for comfortable grooming. The innovative 360 Blade adapts to facial contours for consistent skin contact and control. This device can be used wet or dry, with or without foam, and is suitable for use in the shower.
2. Safety Information
WARNING: Read all safety warnings and instructions before using this product.
- For external use only.
- Avoid contact with eyes.
- Keep away from naked flame or direct heat sources.
- Do not immerse the charging cable or adapter in water.
- Ensure the device is fully dry before charging.
3. Package Contents
Your Philips Norelco OneBlade 360 with Connectivity package includes the following items:
- 1x Philips Norelco OneBlade 360 with Connectivity handle
- 1x 360 Blade for face
- 1x 5-in-1 adjustable comb (1-5mm)
- 1x Body kit (includes 1x skin guard, 1x body comb (3mm), 1x extra body blade)
- 1x Travel case
- 1x USB-A charging cable

Image: All components included in the Philips Norelco OneBlade 360 with Connectivity package.
4. Getting Started (Setup)
- Charging the Device: Fully charge the device before its first use. Connect the USB-A cable to the OneBlade and plug the other end into a compatible USB power source. The battery indicator will show charging progress.
- Attaching the Blade: To attach a blade, align the blade with the handle and push it on until you hear a click. To remove, press the release button on the back of the blade and pull it off.
- Attaching Combs/Guards: For trimming or body grooming, slide the desired comb (5-in-1 adjustable comb for face, body comb, or skin guard) onto the blade until it clicks into place. Ensure it is securely fastened.

Image: Attaching the 360 Blade to the OneBlade handle.
5. Operation
5.1 Facial Hair Grooming
The OneBlade 360 is designed to trim, edge, and shave facial hair of any length. The 360 Blade pivots to maintain constant skin contact for comfort and control.
- Trimming: Attach the 5-in-1 adjustable comb. Select your desired length setting (1-5mm) by rotating the dial. Move the OneBlade against the grain of your hair for an even trim.
- Edging: Remove any comb attachment. Use the dual-sided blade to create precise lines and sharp edges. Hold the blade flat against your skin and move it in the desired direction.
- Shaving: For a close shave, remove any comb attachment. Hold the blade flat against your skin and move it in long, even strokes against the grain of your hair. The dual protection system helps prevent nicks and irritation.

Image: Trimming facial hair with the OneBlade 360.

Image: Creating precise edges with the OneBlade 360.

Image: Shaving facial hair with the OneBlade 360.
5.2 Body Hair Grooming
The OneBlade 360 Face + Body kit includes specific attachments for body hair grooming, including sensitive areas.
- Body Trimming: Attach the 3mm body comb to the blade. Move the OneBlade in any direction to trim body hair to an even length.
- Sensitive Areas: For extra protection on sensitive areas, attach the skin guard over the blade. This provides a barrier between the blade and your skin while still allowing for effective trimming.

Image: Body grooming with the OneBlade 360.
5.3 Using the Philips Daily Care App
The Philips Daily Care app enhances your grooming experience by providing personalized guidance and device information.
- Connectivity: Connect your OneBlade 360 to the app via Bluetooth.
- Blade Performance Tracking: The app notifies you when it's time to replace your blade for optimal performance.
- Battery Status: Monitor your device's battery level and receive alerts when charging is needed.
- Personalized Recommendations: Get grooming tips and style guidance based on your usage patterns.

Image: Philips Daily Care App interface showing smart tracking and style guidance features.
6. Maintenance
6.1 Cleaning
To ensure hygiene and optimal performance, clean your OneBlade after each use:
- Rinse the blade and the device under running water.
- Shake off excess water and allow the device and blade to air dry completely before storing or charging.
- Do not use abrasive cleaning agents or harsh chemicals.
6.2 Blade Replacement
For the best shaving experience, it is recommended to replace the OneBlade blade every 4 months, based on 2 full shaves per week. Actual results may vary depending on usage.
- To replace the blade, press the release button on the back of the current blade and pull it off.
- Align the new blade with the handle and push it on until it clicks into place.

Image: Detaching the blade for replacement or cleaning.
7. Troubleshooting
If you encounter issues with your Philips Norelco OneBlade 360, consider the following general troubleshooting steps:
- Device not turning on: Ensure the device is fully charged. If the battery is low, connect it to the charger.
- Poor trimming/shaving performance: The blade may be dull. Replace the blade if it has been in use for more than 4 months or if performance has noticeably decreased. Ensure the comb attachment is clean and free of hair.
- Irritation after use: Ensure the blade is clean and sharp. Try using the device wet with shaving foam or gel. For sensitive areas, use the skin guard.
- Connectivity issues with app: Ensure Bluetooth is enabled on your smartphone and the OneBlade is within range. Try restarting both the device and the app.
For more specific issues, refer to the official Philips Norelco support resources.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | OneBlade 360 |
| Item Model Number | QP4631/90 |
| Power Source | Battery Powered (1 Lithium Ion battery required) |
| Special Feature | Waterproof |
| Recommended Uses | Beard, Face, Mustache, Sideburns, Body |
| Product Dimensions | 1.26 x 7.48 x 9.06 inches; 8.46 ounces |
| Manufacturer | Philips Norelco |
| First Available | December 20, 2023 |
| Wattage | 5 watts |
9. Warranty and Support
The Philips Norelco OneBlade 360 with Connectivity comes with a 5-year warranty. For detailed warranty terms and conditions, please refer to the official Philips Norelco website or the documentation included with your product.
For product support, frequently asked questions, and to register your product, please visit the official Philips Norelco support page:
You can also explore the Norelco Store on Amazon for additional products and accessories.