1. Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Coyeth 10X Magnifying Glass with Light and Clamp. This versatile tool is designed to enhance precision and clarity for various detailed tasks, including crafts, hobbies, reading, and professional close work. Please read this manual thoroughly before use to ensure optimal performance and safety.
Figure 1.1: Overview of the Coyeth 10X Magnifying Glass with Light and Clamp.
2. Product Features
- 10X Magnification & Real Glass Lens: Equipped with a 4.3-inch real glass lens, providing clear and distortion-free 10X magnification, ideal for intricate tasks.
- Upgraded Head Button Controls: Conveniently located buttons on the lamp head allow for easy adjustment of light settings, unlike models with cord-mounted switches.
- 5 Color Modes & Stepless Dimmable Brightness: Offers five distinct color temperature modes (3000K, 4000K, 4500K, 5000K, 6500K) and continuous brightness adjustment to suit various lighting needs and reduce eye fatigue. Features a memory function to recall the last used settings.
- Adjustable Swing Arm & Clamp Design: Features a robust swing arm with 4 powerful springs and 3 adjustable knots, ensuring stable positioning. The sturdy clamp attaches to surfaces up to 2.1 inches thick, providing hands-free operation.
- High-Quality LED Lighting: Integrated with 72 premium LED chips, providing even, flicker-free illumination with a lifespan exceeding 100,000 hours.
Figure 2.1: 10X Magnification with Real Glass Lens.
Figure 2.2: 5 Color Modes and Stepless Dimming.
3. Package Contents
Verify that all items are present in the package:
- 1x 10X Magnifying Glass with Light and Clamp
- 1x Power Cable
4. Setup & Installation
- Choose a Suitable Surface: Select a flat surface such as a desk, table, or workbench with an edge thickness of up to 2.1 inches (5.3 cm) for clamping.
- Attach the Clamp: Loosen the screw on the clamp. Position the clamp securely onto the edge of your chosen surface. Tighten the screw firmly until the clamp is stable and does not wobble.
- Insert the Magnifier Arm: Insert the base of the magnifying lamp's swing arm into the designated hole on the clamp. Ensure it is fully seated.
- Connect Power: Plug the provided power cable into the lamp's power input, then connect the other end to a suitable power outlet.
- Adjust Position: Utilize the adjustable swing arm to position the magnifying glass and light as needed for your task. The arm allows for 220° up/down, 360° whirl, 135° forward/backward, and 360° left/right adjustments.
Figure 4.1: Swing Arm Adjustments and Clamp Installation.
Figure 4.2: Stable Positioning of the Magnifying Lamp.
5. Operating Instructions
The controls for the magnifying lamp are conveniently located on the head of the lamp.
Figure 5.1: Head Control Buttons.
- Power On/Off: Press the ON/OFF button (red power icon) to turn the lamp on or off.
- Adjust Brightness: Use the Brightness "+" and Brightness "-" buttons to increase or decrease the light intensity. The lamp features stepless dimming for precise control.
- Change Color Mode: Press the 5 Color Modes button (M icon) to cycle through the five available color temperatures (3000K, 4000K, 4500K, 5000K, 6500K).
- Memory Function: The lamp will remember your last used brightness and color mode settings when turned off and on again.
6. Care & Maintenance
- Cleaning the Lens: Gently wipe the glass lens with a soft, lint-free cloth. For stubborn smudges, use a small amount of lens cleaning solution applied to the cloth, not directly to the lens.
- Cleaning the Body: Wipe the lamp body and arm with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the lamp in a clean, dry place away from direct sunlight and extreme temperatures.
- Avoid Excessive Force: While the swing arm is designed to be flexible, avoid applying excessive force when adjusting its position to prevent damage to the joints or springs.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power cable not connected properly. | Ensure the power cable is securely plugged into both the lamp and the power outlet. Test the outlet with another device. |
| Light flickers or is dim. | Insufficient power or faulty connection. | Check power connections. Try a different power outlet. If flickering persists, contact customer support. |
| Magnification is blurry or distorted. | Lens is dirty or damaged. | Clean the lens as described in the Care & Maintenance section. If damaged, contact customer support. |
| Swing arm does not hold position. | Joints are loose or springs are worn. | Check if any retaining knobs or screws at the joints need tightening. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Coyeth |
| Model Number | desk lamp |
| Magnification Strength | 10X |
| Lens Material | Real Glass |
| Lens Diameter | 4.3 inches |
| Light Source | 72 LED Beads |
| Color Modes | 5 (3000K, 4000K, 4500K, 5000K, 6500K) |
| Brightness Adjustment | Stepless Dimmable |
| Power Source | Corded Electric |
| Switch Style | Touch (Head Button) |
| Clamp Thickness (Max) | 2.1 inches |
| Product Dimensions | 10"L x 2"W (referring to head/lens, overall arm length is adjustable) |
| Item Weight | 2.16 pounds |
| LED Lifespan | Over 100,000 hours |
9. Warranty & Support
Your Coyeth 10X Magnifying Glass with Light and Clamp is designed for durability and and performance. In case of any issues, please refer to the following:
- Return Policy: The product is eligible for a refund or replacement within 30 days of purchase, as per standard policy.
- After-Sales Support: If you encounter any issues during usage or have questions not covered in this manual, please feel free to contact Coyeth customer support. Contact information can typically be found on the product packaging or the seller's page where the product was purchased.