1. Introduction
This manual provides detailed instructions for using your MYPAWLETS Paw Print Frame Kit. This kit allows you to create a lasting keepsake of your pet's paw prints using both soft impression clay and a clean-touch ink pad, displayed alongside a cherished photograph in a premium wooden frame. Please read all instructions carefully before beginning.
Image 1.1: The MYPAWLETS Paw Print Frame Kit, showcasing a black frame with a clay paw print, a central photo of a dog, and an ink paw print on the right.
2. Setup
2.1. Unpacking and Components
Carefully unpack all items from the box. Ensure all components listed below are present:
- Wooden Frame (Black)
- Soft Impression Clay
- Clay Roller
- Clean Touch Ink Pad
- Card Stocks (3 sheets)
- Two Display Mats (one standard, one with 'Forever in our hearts' text)
- Customization Tools (Letters/Number Stencil & Stamp)
- Decorative Elements (Heart Trinkets & Butterflies)
- 2-Sided Tape & Nail (for hanging)
- Instruction Manual (this document)
Image 2.1: A visual representation of all items included in the kit, such as the wooden frame, clay, roller, ink pad, card stock, two display mats, customization tools, and decorative elements.
2.2. Preparing the Frame
The frame comes with a protective plexiglass cover. Gently peel off the protective plastic film from both sides of the plexiglass before assembly to ensure clarity.
3. Operation
3.1. Creating a Clay Paw Print
Follow these steps to create a clear and lasting clay paw print:
- Knead the Clay: Remove the soft impression clay from its packaging. Knead the clay thoroughly for 2-3 minutes until it is soft and pliable. This helps prevent cracking during drying.
- Roll the Clay: Place the kneaded clay onto a flat, clean surface. Use the provided roller to flatten the clay evenly to a thickness of approximately 0.5 inches (1.2 cm). Ensure the surface is smooth and free of air bubbles.
- Imprint the Paw: Gently press your pet's paw into the rolled clay. Apply even pressure to ensure a clear impression of the paw pads and claws. If the first attempt is not satisfactory, re-knead and re-roll the clay to try again.
- Air Dry: Once a satisfactory impression is achieved, carefully remove the clay from the surface and place it in a well-ventilated area to air dry. Drying time may vary, but typically takes 24-48 hours. Ensure the clay is completely dry and hardened before handling or assembling into the frame to prevent cracking.
Image 3.1: Step-by-step guide for creating a clay paw print, illustrating kneading, rolling, and imprinting a pet's paw into the soft clay.
3.2. Creating an Ink Paw Print
To create a clean ink paw print without direct contact between ink and paw:
- Combine: Place one of the provided card stock sheets on a flat surface. Position the clean-touch ink pad, ink-side down, onto the card stock. The 'STOP!' indicator on the ink pad should face upwards.
- Press: Gently press your pet's paw onto the top (inkless) side of the ink pad. Apply firm, even pressure to ensure the ink transfers clearly to the card stock below.
- Lift: Carefully lift your pet's paw, then remove the ink pad from the card stock. A clear paw print will be visible on the card stock. Allow the ink to dry completely before handling. You have three card stock sheets for multiple attempts.
Image 3.2: Instructions for using the clean-touch ink pad, demonstrating how to combine the pad with card stock, press the paw, and lift to reveal a mess-free ink print.
3.3. Customization
Personalize your keepsake using the included tools:
- Stencils: Use the letter and number stencils to add your pet's name, birthdate, or the year to the clay print or the display mat. You can write directly on the blank mat with a pencil or fine-tip marker.
- Stamps: The letter and number stamps can be used to emboss text directly into the soft clay before it dries.
- Decorations: Apply the heart trinkets and butterflies to the clay or mat using a small amount of adhesive (not included) for added decoration.
Image 3.3: An overview of the customization tools provided, such as stencils, stamps, and decorative elements, to personalize your pet's paw print keepsake.
3.4. Frame Assembly
Once your clay and ink prints are completely dry, and your photo is ready:
- Choose Mat: Select one of the two display mats. One is blank for your own text, and the other features 'Forever in our hearts'.
- Insert Prints and Photo: Place your dried clay paw print, chosen photograph, and dried ink paw print into the designated openings on the display mat. Secure them from behind with tape if necessary.
- Assemble Frame: Carefully place the assembled mat with prints and photo into the frame. Ensure the plexiglass is clean and free of protective film. Close the back of the frame securely.
- Display: The frame includes a stand for tabletop display and a sturdy hook for wall mounting. Choose your preferred display method.
Image 3.4: Detailed view of the frame's dimensions and features, including the stand and hook for versatile display options.
4. Maintenance
4.1. Care for Your Keepsake
Once the clay paw print is air-dried and the ink print is set, both are designed to last indefinitely. The frame is made of premium wood and includes a protective plexiglass cover.
- Cleaning: To clean the frame and plexiglass, use a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals, which may damage the frame finish or plexiglass.
- Placement: Display the frame in a stable environment, away from direct sunlight or extreme temperature fluctuations, to preserve the integrity of the materials and prints.
5. Troubleshooting
5.1. Common Issues and Solutions
| Issue | Possible Cause | Solution |
|---|---|---|
| Clay paw print cracks after drying. | Clay was not kneaded sufficiently, rolled too thin, or not fully air-dried before handling/assembly. | Ensure clay is thoroughly kneaded to remove air bubbles. Roll to an even thickness of approximately 0.5 inches. Allow ample time for complete air drying (24-48 hours or more, depending on humidity) before moving or assembling. |
| Ink paw print is unclear or incomplete. | Insufficient or uneven pressure applied to the paw, or pet moved during impression. | Ensure the ink pad is placed on a firm, flat surface. Apply firm, even pressure across the entire paw. Hold your pet's paw steady during the impression. Use one of the spare card stock sheets to try again. |
| Plexiglass appears cloudy or scratched. | Protective film not removed, or surface scratched during handling. | Gently peel off the protective plastic film from both sides of the plexiglass. Handle the plexiglass carefully to avoid scratches. |
6. Specifications
- Brand: MYPAWLETS
- Model: B0CQMW86M5
- Color: Black
- Item Weight: 2.12 pounds (approximately 0.96 kg)
- Item Package Dimensions (L x W x H): 14.13 x 9.76 x 1.65 inches (approximately 35.89 x 24.80 x 4.19 cm)
- Specific Uses for Product: Pet paw print keepsake, pet memorial
- Materials: Wooden frame, soft impression clay, clean touch ink pad, plexiglass
7. Support
For any questions, concerns, or assistance with your MYPAWLETS Paw Print Frame Kit, please contact the manufacturer directly through the retailer's platform where the product was purchased. Please have your model number (B0CQMW86M5) and purchase details ready for faster service.