1. Introduction and Overview
The Beast Mini Blender Plus is a powerful and versatile countertop kitchen appliance designed for blending smoothies, shakes, dressings, sauces, and dips. Featuring a 600W motor, it offers best-in-class blending performance in a compact design, making it ideal for small living spaces. The system includes multiple blending vessels and convenient caps for on-the-go use.
The Beast Mini Blender Plus in Mist color, shown with its blending vessels and a sliced orange, ready for use.
2. Setup
Before first use, unpack all components and wash the blending vessels, lids, and blade assembly with warm, soapy water. Rinse thoroughly and allow to dry completely. Ensure the blender base is placed on a stable, flat, and dry surface.
All components of the Beast Mini Blender Plus, including the main base, various blending vessels, and accessories.
Assembly Steps:
- Fill your desired blending vessel with ingredients. Do not overfill past the MAX line.
- Securely twist the blade assembly onto the top of the filled blending vessel. Ensure it is tightly sealed to prevent leaks.
- Invert the assembled vessel and blade, then place it onto the blender base. Align the tabs on the vessel with the slots on the base.
3. Operating Instructions
The Beast Mini Blender Plus features a simple one-button operation for efficient blending.
Close-up view of the single power button on the Beast Mini Blender base.
Blending Modes:
- Pulse: Press and hold the power button for short bursts. Release the button to stop. This is ideal for chopping or controlling texture.
- 1-Minute Blend Cycle: Press and quickly release the power button. The blender will initiate a smart 1-minute blending cycle, automatically adjusting speed and pulsing for optimal texture. The blender will stop automatically after 1 minute.
After blending, remove the vessel from the base. You can replace the blade assembly with a drinking lid, straw cap, or storage lid for convenience. The 'Blend, Sip, Go' feature allows you to take your blended creations with you.
A hand holding a Beast Mini Blender vessel equipped with a straw cap, illustrating the 'Blend, Sip, Go' functionality.
4. Maintenance and Cleaning
Proper cleaning ensures the longevity and hygiene of your Beast Mini Blender Plus. All vessels and lids are made from durable, BPA-free materials.
Cleaning Instructions:
- Vessels and Lids: Wash immediately after use with warm, soapy water. The ribbed design of the vessels (as seen in the image below) is optimized for blending but may require a brush for thorough cleaning, especially with thicker ingredients.
- Blade Assembly: Carefully wash the blade assembly. Pay special attention to the rubber gasket around the blade. This gasket can be removed for thorough cleaning to prevent residue buildup and potential mold formation. Use a non-sharp tool (like the loop of a straw or a fork) to gently pry back the L-shaped gasket from the plastic lip. Ensure it is completely dry before reassembling.
- Blender Base: Wipe the blender base with a damp cloth. Do not immerse the base in water.
Close-up of the ribbed blending vessel, designed to increase turbulence for smoother blends.
The blade assembly, showing the area where the gasket is located for cleaning.
5. Troubleshooting
If you encounter issues with your Beast Mini Blender Plus, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not properly assembled or plugged in. | Ensure the blender is securely plugged into a working outlet. Verify the vessel and blade assembly are correctly aligned and locked onto the base. The secure electronic interlock system prevents operation if not assembled correctly. |
| Leaking during blending. | Blade assembly not tightened sufficiently or gasket is dislodged/dirty. | Ensure the blade assembly is tightly screwed onto the vessel. Check the rubber gasket on the blade assembly for proper seating and cleanliness. Clean the gasket as described in the Maintenance section. |
| Difficulty opening the blade assembly after blending. | Over-tightening or vacuum seal. | Avoid over-tightening the blade assembly. If stuck, try running the sealed vessel under warm water for a few seconds to expand the plastic slightly, then attempt to twist open. Use a firm grip but avoid excessive force. |
| Unpleasant odor or mold formation. | Incomplete cleaning, especially of the gasket. | Thoroughly clean all components, especially the removable gasket on the blade assembly, after each use. Ensure all parts are completely dry before storage. Refer to the Maintenance section for detailed gasket cleaning instructions. |
| Blender stops unexpectedly. | Overheating or ingredients are too dense. | The blender has a patented sensor to prevent overheating. If it stops, unplug it and let it cool down for at least 15-20 minutes. Reduce the amount of ingredients or add more liquid for very thick blends. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | BEAST |
| Model | Mini Plus Mist |
| Color | Mist |
| Power Source | AC |
| Voltage | 120 Volts (AC) |
| Motor Wattage | 600W |
| Capacity | 640 Milliliters (largest vessel) |
| Product Dimensions | 4.13"D x 4.13"W x 13.43"H |
| Number of Speeds | 2 (Pulse, 1-Minute Cycle) |
| Controls Type | Push Button |
| Material Type Free | BPA Free |
| Item Weight | 9.13 pounds |
| UPC | 850026786828 |
7. Warranty and Support
The Beast Mini Blender Plus comes with a Full Warranty. For specific details regarding your warranty coverage, please refer to the warranty card included with your product or visit the official BEAST Health website.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact BEAST Health customer service directly. Contact information can typically be found on the product packaging or the official BEAST Health website.
Manufacturer: Beast Health
