Bandai Hobby - Gundam Seed - #01 Option Parts Set Gunpla 01 (Aile Striker) Instruction Manual

1. Introduction

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of the Bandai Hobby Gundam Seed #01 Option Parts Set Gunpla 01 (Aile Striker). This set is designed to enhance your 1/144 scale High Grade (HG) and Entry Grade (EG) Gundam models, particularly the Strike Gundam, by adding the iconic Aile Striker Pack and various weaponry.

2. Safety Information

Please read all instructions carefully before beginning assembly. This product contains small parts and is recommended for ages 8 and up. Keep small parts away from young children to prevent choking hazards. Exercise caution when handling sharp tools, such as hobby knives or nippers, during assembly. Ensure proper ventilation if using paints or adhesives (not included).

3. Package Contents

Verify that all components listed below are present before starting assembly. If any parts are missing or damaged, please contact customer support.

• Aile Striker x1 set
• Beam Sabers x2
• Energy pack x1
• Joint parts x1 set (various types for compatibility)
• Grand Slam x1
• Bazooka x1
• MMI-M1001 90mm Anti-Air Shotgun x1
• Plastic model kit runners

The product box will have a Bandai Namco warning label, which is proof that you are purchasing an officially licensed Bandai Spirits product.

4. Assembly Instructions

This model kit requires assembly. Follow the diagrams provided in the physical manual included with your product for detailed step-by-step instructions. General tools such as nippers for cutting parts from runners are recommended.

4.1. Attaching the Aile Striker Pack

1. Carefully remove all Aile Striker components from their runners using nippers.
2. Assemble the main Aile Striker unit according to the provided diagrams.
3. Select the appropriate joint part for your specific HG or EG 1/144 Strike Gundam model.
4. Attach the assembled Aile Striker Pack to the back of your Gundam model using the selected joint part. Ensure a secure fit.

4.2. Joint Parts and Compatibility

The kit includes various joint parts to ensure compatibility with a wide range of 1/144 scale HG and EG Gundam models. Refer to the physical manual to identify the correct joint for your specific model's backpack connection point.

4.3. Weapon Assembly

Assemble the Grand Slam, Bazooka, and MMI-M1001 90mm Anti-Air Shotgun as per the instructions. These weapons can be held by your Gundam model's hands. The Beam Sabers can be attached to the Aile Striker Pack or held by the model.

5. Operating and Posing

Once assembled, the Aile Striker Pack and its weapons offer various posing options for your Gundam model. The Aile Striker features articulated wings and boosters, allowing for dynamic display.

5.1. Customization and Compatibility

The Aile Striker Pack can be reconfigured to create original equipment designs for your plastic model. Additionally, this set is designed to combine with other separately sold Option Parts Sets, such as the #02 Option Parts Set Gunpla 02 (Launcher Striker & Sword Striker), to recreate the Perfect Strike Gundam.

6. Care and Maintenance

To ensure the longevity and appearance of your model kit, follow these maintenance guidelines:

• Cleaning: Dust your model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials, which can damage the plastic.
• Handling: Handle the model by its sturdy parts. Avoid excessive force on joints or thin components to prevent breakage.
• Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures, which can cause plastic degradation or discoloration.
• Joint Tightening: If joints become loose over time, a thin layer of clear nail polish or hobby-specific joint tightener can be applied to the peg to increase friction. Allow to dry completely before reassembling.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• Parts not fitting: Ensure you are using the correct parts as indicated in the assembly diagrams. Check for any excess plastic (nubs) left from the runners and carefully trim them.
• Loose connections: If a part feels loose, re-examine the connection point. Sometimes, applying a small amount of non-permanent adhesive (e.g., white glue) or the joint tightening method mentioned in Section 6 can help.
• Missing parts: Double-check the packaging and runners. If a part is genuinely missing, contact Bandai Spirits customer support with your product details.
• Broken parts: For minor breaks, plastic cement designed for model kits can be used. For significant damage, replacement parts may be available through hobby retailers or the manufacturer.

8. Product Specifications

9. Warranty and Customer Support

This product is manufactured by Bandai Spirits. For information regarding product warranty, replacement parts, or technical support, please refer to the official Bandai Spirits website or contact their customer service department. Keep your proof of purchase for any warranty claims.

For general inquiries or further assistance, please visit the official Bandai Spirits website or consult your local hobby retailer.