EUWLY 9.7 inch Android 12 Car Radio Carplay User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your EUWLY 9.7 inch Android 12 Car Radio. This device is designed for Opel Astra J and Buick EXCELLE Verano models from 2010-2014, offering advanced features such as Carplay, Android Auto, GPS navigation, Bluetooth connectivity, and rear view camera support. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Product Overview

2.1 Key Features

• Operating System: Android 12
• Display: 9.7-inch IPS Capacitive Touchscreen (1024 x 600 resolution)
• Memory: 2GB RAM, 32GB ROM
• Connectivity: Wireless Carplay, Android Auto (via Bluetooth or USB), Wi-Fi, Bluetooth
• Navigation: Integrated GPS with support for online and offline maps
• Camera Support: Rear View Camera input (AHD camera compatible)
• Vehicle Integration: Steering Wheel Control support, Canbus integration for real-time vehicle information (parking sensors, climate display, etc.)
• Audio: FM/RDS Radio, Bluetooth music streaming, Stereo audio output

2.2 Included Components

The package includes the following items:

• 1 x Car Radio Unit
• 1 x Rear View Camera
• 1 x Power Cable
• 1 x GPS Antenna
• 1 x Camera Input Cable
• 1 x User Manual
• 1 x RCA Input/Output Cable
• 2 x USB Cables
• 1 x Radio Adapter
• 1 x USB Port Enable Cable
• 1 x Canbus Box
• 1 x Sound Amplifier

Figure 2.2.1: All components included in the EUWLY car radio package.

3. Setup and Installation

Professional installation is recommended for this product. Ensure the vehicle's power is disconnected before beginning installation.

3.1 Pre-Installation Check

Before installing the new car radio, compare the original dashboard layout with the new unit to ensure compatibility. The unit is designed to fit Opel Astra J and Buick EXCELLE Verano (2010-2014) models.

Figure 3.1.1: Dashboard appearance before and after car radio installation.

3.2 Wiring Connections

1. Power Cable: Connect the provided power cable to the vehicle's wiring harness. Ensure all connections are secure.
2. GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield. Connect it to the designated port on the car radio.
3. Rear View Camera: Connect the rear view camera cable to the camera input port on the car radio. Route the camera cable to the rear of the vehicle and install the camera.
4. USB Cables: Connect the USB cables for external devices or for wired Carplay/Android Auto.
5. Canbus Box: If your vehicle supports Canbus, connect the Canbus box as instructed. This synchronizes vehicle data like parking sensors and climate display. Note: Use the 36-pin cable for small connectors and the 40-pin cable for large connectors for A and B connections.
6. Radio Adapter: Connect the radio adapter for FM/RDS functionality.
7. RCA Input/Output: Use these for connecting external audio/video devices if needed.

3.3 Initial Power On

After all connections are made, reconnect the vehicle's power. The unit should power on automatically. Follow the on-screen prompts for initial setup, including language selection and time zone settings.

4. Operating Instructions

4.1 Wireless Carplay and Android Auto

The car radio supports both Apple Carplay and Android Auto. You can connect your smartphone wirelessly via Bluetooth or using a USB cable.

1. Wireless Connection: Enable Bluetooth on your smartphone and the car radio. Pair your phone with the car radio. Once paired, select the Carplay or Android Auto icon on the radio's screen.
2. USB Connection: Connect your smartphone to one of the USB ports using a compatible USB cable. The system should automatically detect and launch Carplay or Android Auto.

Once connected, you can access your phone's navigation, music, calls, and messages directly on the car radio display.

Figure 4.1.1: Carplay and Android Auto connectivity options.

4.2 GPS Navigation

The unit features an integrated GPS system for accurate positioning and stable signal reception. It supports both online and offline maps.

1. Online Maps: Connect the car radio to Wi-Fi (see section 4.5) to use online navigation services.
2. Offline Maps: Download offline map data to the unit's internal storage for navigation without an internet connection.

Access the navigation application from the main menu to input destinations and receive turn-by-turn directions.

Figure 4.2.1: GPS Navigation and Wi-Fi connection interface.

4.3 FM/RDS Radio

Tune into your favorite radio stations using the built-in FM/RDS radio tuner.

1. Select the 'Radio' application from the main menu.
2. Use the on-screen controls to scan for stations or manually tune to a specific frequency.
3. RDS (Radio Data System) provides additional information such as station name and program type where available.

Figure 4.3.1: FM/RDS Radio and Bluetooth interface.

4.4 Bluetooth Hands-Free Calling and Music

Connect your smartphone via Bluetooth for hands-free calling and audio streaming.

1. Enable Bluetooth on your phone and the car radio.
2. Search for available devices on your phone and select the car radio.
3. Once paired, you can make and receive calls directly from the car radio screen. The phonebook will automatically load.
4. Stream music from your phone to the car radio's speakers.

4.5 Wi-Fi Connection

Connect the car radio to a Wi-Fi network to access online features, download apps, and update software.

1. Go to 'Settings' on the car radio.
2. Select 'Wi-Fi' and turn it on.
3. Choose your desired Wi-Fi network from the list and enter the password if required.
4. Once connected, you can download apps like YouTube, TikTok, and Spotify from the App Store.

4.6 Rear View Camera

When the vehicle is put into reverse gear, the car radio will automatically display the feed from the connected rear view camera, enhancing safety during parking and reversing maneuvers. The system supports AHD cameras.

Figure 4.6.1: Rear View Camera display and Steering Wheel Control settings.

4.7 Steering Wheel Control

The car radio supports the vehicle's original steering wheel controls. This allows you to manage audio, calls, and other functions without taking your hands off the steering wheel.

1. If your car does not support Canbus, you may need to manually configure the steering wheel buttons through the radio's settings menu.
2. Navigate to 'Settings' and find the 'Steering Wheel Control' option.
3. Follow the on-screen instructions to assign functions to each button.

5. Maintenance

To ensure the longevity and optimal performance of your car radio, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the display or finish.
• Software Updates: Periodically check for software updates via the Wi-Fi connection to ensure you have the latest features and bug fixes.
• Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, as this can affect performance and lifespan.
• Power: Ensure stable power supply to prevent electrical damage.

6. Troubleshooting

If you encounter issues with your car radio, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact EUWLY customer support for further assistance.

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact EUWLY directly through their official website or customer service channels. Keep your proof of purchase for warranty claims.