FLEXTAILGEAR Zero Pump Instruction Manual

1. Introduction

Thank you for choosing the FLEXTAILGEAR Zero Pump. This ultra-mini electric air pump is designed for convenience and efficiency, making it an ideal companion for outdoor activities such as hiking, camping, and traveling. Its compact size and powerful performance ensure quick inflation and deflation of your sleeping pads and other compatible inflatables.

The FLEXTAILGEAR Zero Pump and its included nozzle adapters.

2. Product Features

• Compact and Portable: Ultra-mini design (1.02 x 2.95 inches) weighing only 1.2 oz (without battery), easily fits in pockets or bags.
• Versatile Compatibility: Equipped with 6 different nozzles compatible with various sleeping pads (KLYMIT, NEMO, BIG AGNES, WINLOCK, STS, EXPED).
• Powerful Inflation and Deflation: Inflates sleeping pads in approximately 50 seconds. Operates quietly with a noise level as low as 68 decibels.
• Seamless Unibody Design: Concealed TYPE-C charging port. Double-click to start, single click to stop.
• Rechargeable Battery: Ensures optimal performance and longevity.

Key features of the Zero Pump, emphasizing its compact size and efficiency.

3. Package Contents

The FLEXTAILGEAR Zero Pump package includes:

• Zero Pump unit
• Instruction Manual
• Air Nozzles (6 different types)
• Lanyard

4. Setup

4.1. Charging the Battery

The Zero Pump uses a rechargeable battery. To charge, twist open the cap to reveal the battery compartment. Remove the battery and connect a Type-C charging cable directly to the battery's port. A red light indicates charging, and a green light indicates a full charge. Remember to recharge the battery once a month to ensure optimal performance and longevity.

The rechargeable battery features a built-in USB-C charging port.

Red light indicates charging, green light indicates fully charged.

4.2. Attaching Air Nozzles

Select the appropriate nozzle from the 6 multi-purpose nozzles provided that best fits your sleeping pad or inflatable. Securely attach the chosen nozzle to the inflation or deflation port of the Zero Pump.

Choose the correct nozzle for your inflatable's valve type.

5. Operating Instructions

5.1. Inflation

To inflate, install the correct air nozzle onto your sleeping pad. Place the Zero Pump's inflation port (marked 'INFLATE') into the air nozzle. Double-click the power button on the side of the pump to start inflation. A single click will stop the operation. The pump can inflate most sleeping pads in about 50 seconds.

Follow these steps to inflate your sleeping pad.

5.2. Deflation

To deflate, attach the appropriate nozzle to the deflation port (marked 'DEFLATE') of the Zero Pump. Place the pump into the air nozzle of your inflatable. Double-click the power button to start the deflation process. The pump will quickly remove air from your inflatable, making it easier to pack. A single click will stop the operation.

The Zero Pump features distinct ports for inflation and deflation.

6. Maintenance

6.1. Battery Care

To maintain optimal battery performance and longevity, recharge the battery once a month, even if the pump is not in regular use. Avoid using the pump continuously for more than 15 minutes to prevent overheating.

6.2. Cleaning

Wipe the exterior of the pump with a soft, dry cloth. Ensure no debris obstructs the inflation or deflation ports. Do not submerge the pump in water.

7. Troubleshooting

If the pump does not turn on, ensure the battery is properly inserted and fully charged. If the pump's performance is reduced, check for any obstructions in the air intake or output ports. For persistent issues, refer to the warranty and support information.

8. Specifications

Key performance specifications of the Zero Pump.

9. Warranty and Support

The FLEXTAILGEAR Zero Pump comes with a 2-year manufacturer warranty. For any support inquiries, please visit the official FLEXTAILGEAR store or contact customer service through your purchase platform.

Visit the FLEXTAILGEAR Store on Amazon