KHUKHU Fiber Mopping Cloths User Manual

Product Overview

These KHUKHU Fiber Mopping Cloths are designed as replacement pads for Liectroux Window Cleaning Robot models HCR-10 and HCR-09. Each pack contains 12 highly absorbent and effective mopping cloths, ensuring your window cleaning robot performs optimally.

Image: A pack of 12 KHUKHU Fiber Mopping Cloths, designed for effective cleaning.

Compatibility

These fiber mopping cloths are specifically compatible with the following Liectroux Window Cleaning Robot models:

• Liectroux HCR-10 Window Cleaning Robot
• Liectroux HCR-09 Window Cleaning Robot

Ensure your robot model matches one of the listed compatible models for proper fit and function.

Image: Example of a compatible Liectroux Window Cleaning Robot (black model).

Image: Example of a compatible Liectroux Window Cleaning Robot (white model).

Setup and Installation

To install the KHUKHU Fiber Mopping Cloths on your Liectroux Window Cleaning Robot, follow these steps:

1. Power Off Robot: Ensure your Liectroux Window Cleaning Robot is powered off and disconnected from any power source before handling.
2. Remove Used Cloths: Gently peel off the old or used mopping cloths from the robot's cleaning pads. These cloths are typically attached with hook-and-loop fasteners (Velcro-like material).
3. Attach New Cloths: Align a new KHUKHU Fiber Mopping Cloth with the circular cleaning pad on the robot. Press firmly to ensure the cloth adheres securely to the hook-and-loop surface. Repeat for all cleaning pads on your robot.
4. Inspect Attachment: Verify that all new cloths are securely attached and lie flat against the cleaning pads without wrinkles or loose edges.

Proper attachment ensures optimal cleaning performance and prevents the cloths from detaching during operation.

Operating Considerations

These fiber mopping cloths are designed for efficient wet and dry cleaning. For best results:

• Wet Cleaning: Lightly dampen the cloths with water or a manufacturer-approved cleaning solution before attaching them to the robot for wet mopping tasks. The high water absorption capacity of these cloths allows for effective removal of dirt and grime.
• Dry Dusting: For dry dusting or polishing, attach the cloths dry. Their dense fiber structure effectively captures dust and fine particles.
• Surface Compatibility: Use the robot and cloths only on surfaces recommended by the Liectroux robot manufacturer (e.g., glass, tiles).

Maintenance and Care

To prolong the life and maintain the effectiveness of your KHUKHU Fiber Mopping Cloths, follow these care instructions:

1. After Each Use: Remove the cloths from the robot immediately after cleaning.
2. Washing: Hand wash or machine wash the cloths in cold water with a mild detergent. Do not use bleach or fabric softeners, as these can degrade the fiber structure and reduce absorption.
3. Drying: Air dry the cloths completely. Do not tumble dry or iron, as high heat can damage the fibers. The cloths are designed for fast drying.
4. Storage: Store clean, dry cloths in a cool, dry place away from direct sunlight.
5. Replacement: Replace cloths when they show signs of wear, tear, or reduced cleaning performance. Regular replacement ensures optimal cleaning results.

Troubleshooting

If you encounter issues related to the mopping cloths, consider the following:

Specifications

Warranty and Support

Information regarding specific product warranty for KHUKHU Fiber Mopping Cloths is not provided within this manual. For warranty claims, product support, or further inquiries, please refer to the original point of purchase or contact the seller directly.

For operational issues related to your Liectroux Window Cleaning Robot, please consult the robot's own user manual or contact Liectroux customer support.