EDISHINE Outdoor/Indoor Wall Light (Model KH1845)

1. Introduction

Thank you for choosing the EDISHINE Outdoor/Indoor Wall Light, Model KH1845. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

This wall light is designed for both indoor and outdoor use, featuring an IP44 waterproof rating and a standard E27 socket, allowing for various bulb types (not included).

2. Safety Instructions

Electrical Safety: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture. Ensure proper grounding to prevent electric shock.
Qualified Electrician: Installation should be performed by a qualified electrician or a competent person in accordance with local electrical codes and regulations.
Bulb Type: Use only E27 base bulbs. Do not exceed the maximum wattage: LED Max. 15W, Incandescent Max. 40W.
IP44 Rating: The fixture is IP44 rated, meaning it is protected against solid objects over 1mm and splashing water from any direction. While suitable for outdoor use, avoid direct high-pressure water jets.
Handling: Handle the fixture with care. Do not drop or subject it to strong impacts.
Ventilation: Ensure adequate ventilation around the fixture, especially when using incandescent bulbs, to prevent overheating.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

EDISHINE Wall Light Fixture (Model KH1845)
Mounting Hardware (screws, wall plugs)
User Manual

Note: The light bulb is not included and must be purchased separately.

4. Specifications

Brand	EDISHINE
Model Number	KH1845
Color	Black
Material	Aluminum, Plastic
Dimensions (L x W x H)	27L x 11W x 11H cm
Voltage	220-240 Volts
Bulb Base	E27
Max Wattage (LED)	15 Watts
Max Wattage (Incandescent)	40 Watts
IP Rating	IP44 (Waterproof)
Mounting Type	Wall Mount, Flush Mount
Recommended Use	Patio, Garage, Terrace, Garden, Living Room

5. Installation Guide

The EDISHINE wall light is designed for simple and intuitive installation. Follow these steps carefully:

Prepare the Installation Area: Ensure the power supply to the installation area is turned off at the main circuit breaker. Mark the desired mounting position on the wall.
Mount the Bracket: Use the provided mounting hardware (screws and wall plugs) to securely attach the universal mounting plate to the wall. Ensure it is level and stable.
Connect Wiring: Connect the household electrical wires to the fixture's wires according to local electrical codes (typically Live to Live, Neutral to Neutral, Ground to Ground). Ensure all connections are secure and insulated.
Attach the Fixture: Carefully align the fixture with the mounting plate and secure it with the provided screws.
Install the Bulb: Unscrew the plastic lampshade. Insert an E27 base bulb (LED Max. 15W or Incandescent Max. 40W) into the socket. Screw the lampshade back into place, ensuring it is tight to maintain the IP44 rating.
Restore Power: Turn on the power supply at the main circuit breaker and test the light.

Figure 5.1: Dimensions of the EDISHINE Wall Light (27cm H x 11cm W x 11cm D) with mounting screws.

Figure 5.2: Three-step installation guide for the EDISHINE Wall Light, showing mounting, wiring, and bulb insertion.

Figure 5.3: Hand installing an E27 bulb into the EDISHINE Wall Light, highlighting the spacious design for easy bulb replacement.

6. Operating Instructions

Once installed and powered, the EDISHINE wall light operates via your standard wall switch. Simply toggle the switch to turn the light on or off.

Figure 6.1: EDISHINE Outdoor/Indoor Wall Light, Model KH1845, illuminated.

EDISHINE Wall Light showing different light temperatures — Figure 6.2: EDISHINE Wall Light demonstrating different light temperatures (Cool White and Warm White) depending on the installed E27 bulb.

7. Maintenance

Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or plastic lampshade.
Bulb Replacement: Disconnect power before replacing the bulb. Unscrew the plastic lampshade, carefully remove the old bulb, and screw in a new E27 bulb (observing wattage limits). Reattach the lampshade securely.
Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

Figure 7.1: Detailed view of EDISHINE Wall Light components, including the E27 socket and plastic lampshade, for maintenance reference.

8. Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	No power supply. Bulb is faulty. Loose wiring connection.	Check circuit breaker. Replace bulb. Inspect wiring (with power off), tighten connections.
Light flickers.	Loose bulb. Faulty bulb. Unstable power supply.	Tighten bulb. Replace bulb. Consult an electrician to check power supply.
Water inside the fixture.	Lampshade not securely tightened. Damage to fixture.	Ensure lampshade is tightly screwed. Inspect for cracks or damage; replace if necessary.

9. Warranty and Support

EDISHINE products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the EDISHINE official website or contact their customer service directly. Please have your model number (KH1845) and purchase details ready when contacting support.

Online Support: Visit the EDISHINE Store on Amazon

EDISHINE KH1845

EDISHINE Outdoor/Indoor Wall Light