Introduction
This user manual provides comprehensive instructions for the installation, operation, and maintenance of the HUIYEETEX DC24V Wall Mounted Receiver AC227-13. This device is designed to control roller blinds, shades, and other tubular motors, offering both remote and manual switch control capabilities. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Product Overview
Key Features
- Universal Voltage Compatibility: Supports 100V-240V working voltage, compatible with 230V and 110V systems for global use.
- Versatile Application: Suitable for roller shutters, roller blinds motors, window openers, and tubular motors.
- Precise Control: Enables easy control of motor open, stop, and close functions, with adjustable open range.
- DC 24V Motor Compatibility: Designed for use with standard DC 24V motors with power below 168W.
- Dual Control Modes: Supports both remote control and manual switch control.
- External Sensor Support: Can connect external sensors with DC12V/0.3A.
Product Components
The HUIYEETEX AC227-13 Wall Mounted Receiver includes the main receiver unit and is designed to integrate with compatible remote controls and motors.
Image: The HUIYEETEX AC227-13 Wall Mounted Receiver shown alongside its product packaging, indicating it is a "Wall Type Radio Receiver".
Image: The AC227-13 receiver unit, clearly showing the "Up", "Stop", and "Down" buttons, along with a "Signal LED light". The image also highlights its compatibility with AC100-240V wide voltage power supply and DC 24V output, demonstrated in an outdoor setting with an awning.
Setup and Installation
Important Safety Notice: Ensure the power supply is completely cut off before performing any wiring to prevent electric shock and damage to the device.
Wiring Diagram
Image: Detailed wiring diagram for the AC227-13 receiver. It illustrates connections for a DC 24V motor (M+/-, M-/+, 12V, GND, STOP, DOWN, UP), 100-240VAC power input (L, N), and an external manual switch/wind/light/rain sensor (12V, GND, STOP, DOWN, UP). The diagram also shows the AC227-13 product diagram with its indicator light and buttons, and an AC123 touch screen transmitter for programming.
Installation Steps
- Power Disconnection: Before starting, ensure the main power supply to the installation area is turned off at the circuit breaker.
- Mounting: Mount the AC227-13 receiver on a wall using appropriate screws and anchors. Ensure it is securely fastened.
- Motor Connection: Connect the DC 24V motor wires to the corresponding terminals on the receiver (M+/-, M-/+, 12V, GND, STOP, DOWN, UP) as per the wiring diagram. Pay close attention to polarity.
- Power Input Connection: Connect the 100-240VAC power input wires (Live 'L' and Neutral 'N') to the designated terminals on the receiver.
- Optional External Sensor/Switch Connection: If using an external manual switch or environmental sensor (wind/light/rain), connect its wires to the respective 12V, GND, STOP, DOWN, UP terminals.
- Secure Wiring: Double-check all connections to ensure they are tight and correctly wired.
- Power Restoration: Once all wiring is complete and verified, restore power to the circuit.
Operating Instructions
Manual Control
The AC227-13 receiver features integrated buttons for direct control:
- Up Button (▲): Press to raise the roller blind/shade.
- Stop Button (–): Press to stop the motor at any desired position.
- Down Button (▼): Press to lower the roller blind/shade.
Remote Control Pairing (Example with AC123 Transmitter)
To pair the receiver with a compatible remote control (e.g., AC123 touch screen transmitter), follow the instructions provided with your specific remote control. Generally, this involves putting the receiver into a pairing mode (often by pressing a button on the receiver for a few seconds) and then activating the pairing function on the remote.
Image: This diagram illustrates the AC227-13 receiver with its indicator light and control buttons, alongside an AC123 touch screen transmitter, demonstrating the remote control capability and programming options.
Adjusting Open Range
The receiver allows for adjustment of the open range. Refer to the specific instructions for your motor and remote control for detailed steps on setting limits and intermediate positions.
Maintenance
The HUIYEETEX AC227-13 receiver is designed for low maintenance. Follow these guidelines to ensure longevity:
- Cleaning: Gently wipe the surface of the receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Environmental Conditions: Ensure the receiver is installed in a dry environment, away from direct moisture or extreme temperatures.
- Wiring Inspection: Periodically check wiring connections for any signs of loosening or damage. Ensure power is disconnected before inspection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not respond to control. |
|
|
| Motor moves in the wrong direction. | Motor polarity reversed. | Reverse the motor's positive and negative wire connections at the receiver (ensure power is off first). |
| Receiver LED not lighting up. | No power or internal fault. | Check power supply. If power is present and LED remains off, contact support. |
| Difficulty pairing remote. | Incorrect pairing procedure or interference. | Refer to your remote control's manual for specific pairing steps. Ensure no strong interference sources are nearby. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support.
Specifications
Image: This diagram provides detailed dimensions of the AC227-13 receiver (86mm/3.38" width, 67mm/2.63" height, 12mm/0.47" depth, 26mm/1.02" total depth including wall mount). It also lists key specifications: Power Supply (AC100-150V 60Hz 24V/4.5A(max) or AC190-240V 50Hz 24V/7A(max)), Receiving Frequency (433.92MHz), Receiving Sensitivity (≥-110dBm), Paring Quantity (≤20pcs Emitters), and Control Mode (Remote/Manual Control).
| Attribute | Detail |
|---|---|
| Model | AC227-13 (Manufacturer Reference: HYC-AC227-13-RH) |
| Brand | HUIYEETEX |
| Operating Voltage | 24 Volts DC (Input: AC100-240V) |
| Power Output | Max 168W for DC 24V motor |
| Operation Mode | ON-STOP-OFF |
| Switch Type | Push Button |
| Mounting Type | Wall Mount |
| Material | Brass, Copper, Stainless Steel |
| Receiving Frequency | 433.92MHz |
| Receiving Sensitivity | ≥-110dBm |
| Paring Quantity | ≤20pcs Emitters |
| Dimensions (Approx.) | 86mm x 86mm x 26mm (3.38" x 3.38" x 1.02") |
| Parcel Dimensions | 9.91 x 9.91 x 5.99 cm; 299.37 g |
Warranty and Support
Specific warranty information for the HUIYEETEX AC227-13 receiver is not provided in the product details. For warranty claims or technical support, please contact the manufacturer, HUIYEETEX, or your point of purchase. Ensure you have your product model number (AC227-13) and purchase details ready when contacting support.
For further assistance, you may refer to the official HUIYEETEX website or contact their customer service department.