CollaredEagle Full Bed Frame User Manual

Introduction

Thank you for choosing the CollaredEagle Full Bed Frame. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

WARNING: Do not exceed the load capacity of 1200 pounds. Always follow assembly instructions carefully to prevent instability. Be cautious of sharp edges during assembly and use. Ensure all bolts are securely tightened before use. Regularly check and re-tighten all connections to maintain stability.

Package Contents

Before assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Headboard and Footboard components
• Side rails
• Steel support slats
• Center support legs
• Integrated charging station (pre-installed on headboard)
• RGB LED light strips with remote control
• Assembly hardware (bolts, screws, Allen key, screwdriver)

Assembly Instructions

Assembly is designed to be straightforward with a quick lock-on installation system and fewer screws. It is recommended to assemble the bed frame with two people.

Visual Assembly Guide

Official assembly video for the CollaredEagle Bed Frame, demonstrating step-by-step installation of components including the headboard, footboard, side rails, and support slats.

Step-by-Step Assembly

1. Prepare Components: Unpack all parts and lay them out. Identify each part by its corresponding number or letter as indicated in the parts list. Ensure you have the included Allen key and screwdriver.
2. Assemble Headboard and Footboard: Attach the horizontal bars to the vertical posts of both the headboard and footboard using the provided bolts and Allen key. Do not fully tighten bolts until the entire frame is assembled.
3. Connect Side Rails: Attach the side rails to the assembled headboard and footboard. Ensure the charging station component is correctly aligned with the headboard side rail.
4. Install Center Supports: Secure the center support beams and legs to the main frame. These provide crucial stability for the mattress.
5. Place Steel Slats: Lay the steel slats across the frame. The slats are designed for easy placement and secure fit, eliminating the need for a box spring.
6. Install LED Lights: Carefully attach the RGB LED light strips to the designated areas on the headboard and side rails. Ensure the adhesive is firm. Connect the light controller and power supply.
7. Final Tightening: Once all components are in place and aligned, securely tighten all bolts using the Allen key. Do not overtighten.

Figure 1: Product Dimensions and Weight Capacity. The full-size frame measures 78.3"L x 54.5"W x 35.5"H and has a weight capacity of 1000 lbs.

Figure 2: Under-Bed Storage. The frame provides approximately 11 inches of clearance for ample under-bed storage.

Operating Instructions

Using the Charging Station

The integrated charging station is located on the headboard side rail. It features 2 AC outlets, 1 USB-A port, and 1 USB-C port. Simply plug the bed frame's power cord into a wall outlet to activate the charging station. Use it to conveniently charge your electronic devices.

Figure 3: Charging Station. Features 2 AC outlets, 1 USB-A, and 1 USB-C port for convenient device charging.

Controlling the RGB LED Lights

The RGB LED lights can be controlled via the included remote control or a smartphone application. Ensure the light strips are properly connected to the controller and power supply.

• Remote Control: Use the remote to power the lights on/off, change colors (over 60,000 options), adjust brightness, and select various modes such as music sync, mic mode, and timing mode.
• Smartphone App: Download the recommended app (refer to the QR code on the light controller or packaging for download link). Pair your device via Bluetooth. The app offers advanced control, including custom color creation, scene modes, and scheduling.

Figure 4: RGB LED Lights. Illustrates the vibrant lighting options and control methods via remote or smartphone app.

Maintenance

To ensure the longevity and appearance of your bed frame, follow these maintenance guidelines:

• Cleaning: Wipe down the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Tighten Connections: Periodically check all bolts and screws and re-tighten them as needed to maintain structural integrity and prevent squeaking.
• LED Lights: If the LED light strips become loose, re-secure them with additional adhesive clips if necessary. Keep the light controller and power supply in a dry, safe location.

Troubleshooting

Specifications

• Model: BF002-BK-F-CE4
• Size: Full
• Product Dimensions: 78.3"L x 54.49"W x 35.5"H
• Material: High-quality metal
• Finish Type: Painted
• Weight Capacity: Up to 1200 lbs
• Under-Bed Clearance: Approximately 11 inches
• Lighting: RGB LED light strips with remote and app control (over 60,000 colors, music mode, mic mode, timing mode)
• Assembly Required: Yes

Warranty and Support

CollaredEagle provides a manufacturer's warranty for this product. For detailed warranty information, product support, or to order replacement parts, please contact CollaredEagle customer service through the retailer where the product was purchased or visit the official CollaredEagle website. Please have your model number (BF002-BK-F-CE4) and purchase date available when contacting support.