ANYCUBIC ABS-Like Resin Pro 2 User Manual

1. Introduction

The ANYCUBIC ABS-Like Resin Pro 2 is an advanced photopolymer resin designed for LCD and DLP 3D printers. It offers enhanced strength and toughness, high precision, minimal shrinkage, and low odor, making it suitable for a wide range of applications from structural parts to detailed models. This manual provides essential information for safe handling, optimal printing, and proper maintenance of the resin.

Figure 1: ANYCUBIC ABS-Like Resin Pro 2 product packaging.

2. Safety Information

Always prioritize safety when handling 3D printer resins. This resin is a chemical product and requires careful handling to prevent exposure and ensure a safe working environment.

• Personal Protective Equipment (PPE): Always wear nitrile gloves, safety glasses, and a respirator (with organic vapor cartridges) when handling liquid resin. Avoid direct skin and eye contact.
• Ventilation: Work in a well-ventilated area to minimize inhalation of resin fumes. If possible, use an enclosure with an exhaust fan.
• Storage: Store resin in its original sealed container in a cool, dry, dark place, away from direct sunlight and heat sources. Keep out of reach of children and pets.
• Spills: In case of spills, absorb with inert material (e.g., sand, vermiculite) and clean the area with isopropyl alcohol (IPA). Dispose of contaminated materials properly.
• Disposal: Do not pour liquid resin down drains. Cure any waste resin under UV light until solid, then dispose of it as regular plastic waste according to local regulations. Contaminated IPA should also be cured or disposed of as chemical waste.
• First Aid:
  • Skin Contact: Wash immediately with plenty of soap and water. If irritation persists, seek medical attention.
  • Eye Contact: Rinse immediately with plenty of water for at least 15 minutes, holding eyelids open. Seek immediate medical attention.
  • Inhalation: Move to fresh air. If breathing difficulties occur, seek medical attention.
  • Ingestion: Do NOT induce vomiting. Rinse mouth with water and drink plenty of water. Seek immediate medical attention.

3. Product Overview and Features

The ANYCUBIC ABS-Like Resin Pro 2 is engineered for superior performance in resin 3D printing. Its advanced formulation provides several key benefits:

• Enhanced Strength and Toughness: This resin significantly improves toughness, with an elongation at break increased by over 100% compared to previous versions. This makes printed models stronger and more durable, ideal for functional parts, industrial prototypes, and fixtures.


Figure 2: Visual comparison of enhanced toughness and elongation at break.

• High Flowability, High Success Rate: The low viscosity and high flowability of the resin contribute to shorter curing times and easier model formation. This also aids in rapid resin reflow, minimizing delamination during printing and improving backplane adhesion, which collectively reduces printing failures.


Figure 3: High flowability ensures smooth printing and easy model formation.

• High Precision with Minimal Shrinkage: With a very low shrinkage rate, the resin minimizes distortion, allowing for high-precision prints with sharp and vivid details.

Figure 4: Detailed mechanical part showcasing high precision and minimal shrinkage.
• Low-Odor for Peaceful Printing: The resin features a specially developed low-odor formula, reducing discomfort for users sensitive to smells and contributing to a more pleasant printing environment.


Figure 5: Low-odor formula for a more comfortable printing experience.

• High Compatibility: This resin is compatible with a broad spectrum of LCD and DLP 3D printers that operate within the 365-405nm wavelength range, ensuring seamless integration with most printers available on the market.


Figure 6: Wide compatibility with various 3D printer models.

• Enhanced Protection Packaging: The resin comes in safety packaging with a leak-proof design and multiple protective measures, ensuring worry-free handling and minimizing concerns about damage or leakage during transport and storage.

Figure 7: Secure packaging with leak-proof design.

4. Setup and Pre-printing Preparation

Proper preparation is key to successful 3D prints. Follow these steps before starting your printing process:

1. Shake the Resin Bottle: Before each use, thoroughly shake the resin bottle for at least 1 minute to ensure the resin components are well mixed. This is crucial for consistent print quality and color.
2. Room Temperature: Ensure your printing environment is at a stable temperature, ideally between 20°C - 30°C (68°F - 86°F). Extreme temperatures can affect resin viscosity and curing performance.
3. Pour Resin into Vat: Carefully pour the desired amount of resin into your printer's resin vat. Avoid overfilling.
4. Printer Calibration: Ensure your 3D printer is properly calibrated, including Z-axis calibration and build plate leveling, according to your printer's specific instructions.

5. Operating (Printing Process)

Once prepared, you can begin the printing process. The following table provides recommended printing parameters for various Anycubic 3D printers. These are starting points and may require fine-tuning based on your specific printer, model complexity, and environmental conditions.

Figure 8: Recommended Printing Parameters for Anycubic 3D Printers.

General Printing Guidelines:

• Slicing Software: Use compatible slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model.
• Exposure Settings: Adjust exposure times based on your printer's power and screen type. Refer to the table above for initial settings. Over-exposure can lead to brittle prints, while under-exposure can cause print failures.
• Layer Thickness: A common layer thickness is 0.05mm, offering a good balance between detail and print speed.
• Supports: Add appropriate supports to your model to prevent deformation and ensure successful printing, especially for overhangs and intricate details.
• Post-Curing: After printing and cleaning, post-cure your models under UV light to achieve maximum strength and hardness.

6. Maintenance and Post-Processing

Proper post-processing and maintenance are essential for the longevity of your prints and resin.

1. Cleaning Prints:
   • After printing, carefully remove the model from the build plate.
   • Wash the printed model thoroughly with 95% or higher concentration Isopropyl Alcohol (IPA) or a dedicated resin cleaner. Use a soft brush if necessary to remove uncured resin from crevices.
   • Rinse the model for 1-2 minutes, then allow it to air dry completely or use compressed air. Ensure no liquid resin remains on the surface.
2. Curing Prints:
   • Once clean and dry, place the model in a UV curing chamber or expose it to direct sunlight.
   • Curing time varies depending on the UV light source and model thickness. Typically, a few minutes in a dedicated curing station or 30-60 minutes in direct sunlight is sufficient.
   • Ensure all surfaces are exposed to UV light for even curing.
3. Storing Unused Resin:
   • If you have unused resin in the vat, filter it back into the original bottle using a resin filter or fine mesh to remove any cured particles or debris.
   • Seal the bottle tightly and store it in a cool, dry, dark place, away from direct sunlight and UV light sources.
4. Cleaning the Resin Vat and Build Plate:
   • Regularly clean your resin vat and build plate with IPA to prevent resin buildup and ensure optimal performance.
   • Inspect the FEP film in the resin vat for any damage or cloudiness. Replace if necessary.

7. Troubleshooting

Here are some common issues and their potential solutions:

8. Specifications

• Brand: ANYCUBIC
• Model Name: ABS-Like Resin Pro 2
• Color: Grey (This manual refers to the Grey variant, other colors available)
• Item Weight: 2 Kilograms (for this specific variant)
• Product Dimensions: 10.63 x 8.27 x 4.25 inches (Packaging dimensions)
• Printing Technology Compatibility: SLA or DLP 3D Printers
• Wavelength Compatibility: 365-405nm UV light
• Key Features: Enhanced Strength and Toughness, High Flowability, High Precision, Minimal Shrinkage, Low Odor.

9. Warranty and Support

The ANYCUBIC ABS-Like Resin Pro 2 comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the official ANYCUBIC website or contact the ANYCUBIC Official Store directly. Ensure you have your purchase information and product details ready when seeking support.

For further assistance, you may visit the ANYCUBIC Official Store on Amazon.