Used Cars Glass Neon Sign 37"L x 20"H #15900 Instruction Manual

Introduction

This manual provides essential information for the safe and effective use, installation, and maintenance of your new ARTER NEON SIGN. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Important Safety Instructions

Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before installation and use.
• Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Do not expose to rain or moisture. For indoor use only.
• Unplug the sign from the outlet when not in use or before cleaning.
• Do not operate any sign with a damaged cord or plug, or after the sign malfunctions or has been damaged in any manner.
• Only use attachments/accessories specified by the manufacturer.
• Keep out of reach of children.

Package Contents

Carefully unpack the sign and check for any damage. Ensure all components are present:

• Glass Neon Sign (Used Cars Glass Neon Sign 37"L x 20"H #15900)
• Power Transformer
• Mounting Hooks
• Nails
• Chain for hanging

Image: Contents of the neon sign package, showing the power transformer, hanging chain, hooks, and nails.

Image: The "Used Cars" glass neon sign, featuring "Open" in yellow, "USED" in red, and "CARS" in green, all enclosed within a blue neon border.

Setup and Installation

The ARTER NEON SIGN is designed for quick and easy installation. Follow these steps for proper setup:

1. Choose a Location: Select a dry, indoor location away from direct sunlight, excessive heat, or moisture. Ensure there is a power outlet nearby.
2. Mounting:
   • For hanging, use the provided chain. Attach the chain to the pre-drilled holes or eyehooks on the sign's frame.
   • Securely hang the sign from a sturdy ceiling hook or wall mount using the chain. Ensure the mounting point can support the weight of the sign.
   • Alternatively, the sign can be mounted directly to a wall using the provided nails and hooks, ensuring it is level and secure.
3. Connect Power: Connect the power transformer to the sign. Then, plug the transformer into a standard electrical outlet. Ensure the connection is secure.
4. Initial Check: Once plugged in, the sign should illuminate. If it does not, refer to the Troubleshooting section.

An installation video can be found on the manufacturer's YouTube page, "Arter Neon".

Operating Instructions

Operating your ARTER NEON SIGN is straightforward:

• Power On/Off: The sign is powered on by plugging the transformer into an electrical outlet and powered off by unplugging it. There is no separate on/off switch on the sign itself.
• Continuous Operation: The sign is designed for continuous indoor operation.
• Brightness: The brightness of the neon tubes is fixed and cannot be adjusted.

Maintenance and Care

To ensure the longevity and optimal performance of your neon sign, follow these maintenance guidelines:

• Cleaning:
  • Always unplug the sign before cleaning.
  • Use a soft, dry cloth to gently wipe down the glass tubes and acrylic backing.
  • Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the sign.
• Handling: Handle the sign with care, especially the glass tubes, as they are fragile. Avoid bumping or dropping the sign.
• Storage: If storing the sign, ensure it is in a dry, safe place where it will not be subjected to impacts or extreme temperatures. Keep it in its original packaging if possible for best protection.

Troubleshooting

If your neon sign is not functioning as expected, consult the following table:

Specifications

Image: A close-up view of a red neon sign, demonstrating the illuminated glass tubing.

Image: A sample board displaying the range of neon colors available, categorized into "Regular Color" and "Classic Color" options.

Warranty and Support

ARTER NEON SIGN provides a 1-year warranty on this product. This warranty covers defects in materials and workmanship under normal use.

For any problems, questions, or support needs, please do not hesitate to contact customer service. The manufacturer aims to provide a prompt reply within 24 hours during business days.

For installation assistance, refer to the installation video available on the Arter Neon YouTube channel.

Disposal

When the product reaches the end of its life, please dispose of it responsibly according to local regulations. Neon signs contain glass and inert gases, and the transformer contains electronic components. Do not dispose of with general household waste.