1. Introduction
This manual provides detailed instructions for the safe and effective use of your VivaComfort Digital Medical Scale ADIME904-01. Please read this manual thoroughly before operating the device and retain it for future reference.
The VivaComfort Digital Medical Scale is designed for accurate body weight measurement and includes a mechanical height rod for height assessment. It features a digital display, BMI calculation, and unit conversion between pounds (lbs) and kilograms (kg). The scale can be powered by an AC adapter or internal rechargeable batteries.
2. Safety Information
- Always place the scale on a firm, level surface to ensure accurate readings and prevent tipping.
- Do not exceed the maximum weight capacity of 660 lbs (300 kg).
- Ensure the anti-slip safety mat is properly in place on the weighing platform before use.
- Keep the scale away from water or excessive moisture to prevent electrical hazards.
- Do not attempt to disassemble or repair the scale yourself. Contact qualified service personnel for assistance.
- Supervise children and individuals with mobility issues when using the scale.
- Use only the provided AC adapter for charging.
3. Package Contents
Verify that all items listed below are included in your package:
- Digital Medical Scale (Base and Pillar with Display)
- Mechanical Height Rod
- AC Adapter
- Hex Key
- Bolts (3)
- User Manual (this document)
4. Setup
Follow these steps to assemble your VivaComfort Digital Medical Scale:
- Attach the Pillar to the Base: Carefully align the pillar with the designated holes on the scale base. Secure it using the three provided bolts and the hex key.
- Insert the Height Rod: Guide the mechanical height rod through the hole located below the indicator's base and into the corresponding hole in the scale base.
- Secure the Height Rod: Tighten the height rod by turning it clockwise until it is firmly in place.
- Power Connection: Connect the AC adapter to the scale and a power outlet, or ensure the internal rechargeable batteries are charged.
Image: Overall dimensions of the VivaComfort Digital Medical Scale, showing height, width, and depth measurements.
Video: This video demonstrates the assembly process for the VivaComfort Digital Physician Scale, including attaching the pillar and inserting the height rod.
5. Operating Instructions
5.1 Powering On/Off
Press the ON/OFF/ZERO button to turn the scale on. The display will show "0.0" when ready for use. Press and hold the ON/OFF/ZERO button to turn the scale off.
5.2 Weighing Procedure
- Ensure the scale is on a flat, stable surface and displays "0.0".
- Step onto the center of the weighing platform. Stand still until your weight is displayed and stabilized.
- The display has a hold function, which will lock the weight reading.
Image: A person standing on the VivaComfort Digital Medical Scale, demonstrating proper use for weight measurement.
5.3 Unit Conversion (lbs/kg)
To switch between pounds (lbs) and kilograms (kg), press the UNIT/BMI button. The active unit will be indicated on the display.
5.4 BMI Calculation
- After obtaining a stable weight reading, press the UNIT/BMI button again to enter BMI mode.
- Use the arrow buttons (< and >) to input the user's height.
- Once the height is entered, the scale will calculate and display the Body Mass Index (BMI).
- To exit BMI mode, press the TARE button.
Image: A close-up view of the digital display on the VivaComfort Medical Scale, showing buttons for ON/OFF/ZERO, TARE, UNIT/BMI, and PRINT/HOLD.
Video: This video demonstrates the interface of the VivaComfort Digital Scale, including BMI operation and calibration steps.
5.5 Height Measurement
The integrated mechanical height rod can be extended upwards to measure height. Ensure the user stands upright with their back against the rod for an accurate reading at eye level.
5.6 Calibration
For calibration, refer to the "Digital Scale Interface" video or consult the full product manual for detailed steps. Typically, this involves pressing and holding the TARE key until a specific code (e.g., "Pd 000") appears, then following on-screen prompts to apply known weights.
6. Maintenance
- Cleaning: Wipe the scale surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a dry, cool place away from direct sunlight and extreme temperatures.
- Battery Care: If using rechargeable batteries, ensure they are charged regularly to maintain optimal performance. If the scale will not be used for an extended period, fully charge the batteries before storage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Scale won't turn on | No power, discharged batteries, faulty AC adapter. | Check AC adapter connection. Charge batteries. Replace AC adapter if necessary. |
| Inaccurate weight readings | Scale not on a level surface, object touching scale, scale needs calibration. | Ensure scale is on a flat, stable surface. Remove any objects touching the scale. Perform calibration if needed. |
| Display shows "Err" | Overload, internal error. | Ensure weight does not exceed 660 lbs. Turn off and restart the scale. If error persists, contact support. |
| Height rod is loose | Not tightened properly. | Tighten the height rod by turning it clockwise. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | ADIME904-01 |
| Weight Capacity | 660 lbs (300 kg) |
| Weight Units | lbs, kg |
| Power Source | AC Adapter (included) or Internal 6V Rechargeable Batteries |
| Display | Digital LED |
| Platform Dimensions | 15.75” x 11.81” |
| Item Weight | 23.7 pounds |
| Package Dimensions | 34.75 x 13.6 x 8.5 inches |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official VivaComfort website. Keep your purchase receipt as proof of purchase for any warranty claims.