GORILLA GRIP 36 Inch, Slate Gray
GORILLA GRIP Door Draft Stopper User Manual
Model: 36 Inch, Slate Gray
1. Introduction
Thank you for choosing the GORILLA GRIP Door Draft Stopper. This product is designed to effectively block cold or hot air, light, noise, and pests from entering or escaping through gaps under doors. Its robust construction and thoughtful design ensure long-lasting performance and improved indoor comfort.
Image 1.1: The GORILLA GRIP Door Draft Stopper in Slate Gray, shown with its packaging and an included hook and loop fastener roll.
2. Key Features
- Effective Gap Blocking: Designed to fit gaps up to 3 inches, restricting air, light, dirt, dust, and pests.
- Heavy-Duty Construction: Filled with cotton and natural sand for even weight distribution, weighing 2.2 pounds for secure placement.
- Stay-in-Place Grip Dots: Unique PVC grip dots on the underside prevent curling and ensure a tight fit, keeping the stopper from getting caught under doors.
- All-Season Protection: Provides year-round insulation against temperature fluctuations.
- Easy Installation & Removal: Simple to place and includes optional hook and loop fastener for permanent attachment. Features easy hang handles for storage.
Image 2.1: Visual representation of the draft stopper's key features, including draft blocking, slip-resistance, heavy-duty filling, and easy hang loops.
3. Setup and Installation
- Measure Your Door: Before purchasing, measure the width of your door to select the appropriate length of the draft stopper. This model is 36 inches long.
- Placement: Position the draft stopper at the bottom of your door, ensuring the PVC grip dots are facing downwards, resting on the floor.
- Adjust for Fit: Once placed, the stopper should fully adjust to the door's size, creating a snug fit against the gap.
- Optional Permanent Installation (Hook & Loop Fastener):
- Clean the bottom edge of your door thoroughly to ensure good adhesion.
- Peel the backing from one side of the included hook and loop fastener strip.
- Carefully apply the adhesive side to the bottom edge of your door.
- Align the draft stopper with the fastener on the door and press firmly to secure. This will keep the stopper attached to the door even when opened.
Image 3.1: The draft stopper positioned at the bottom of a door, demonstrating the optional hook and loop fastener for secure attachment.
Image 3.2: A detailed view of the PVC grip dots on the underside, designed to prevent slipping and ensure a tight seal.
4. Operation and Usage
The GORILLA GRIP Door Draft Stopper operates passively by creating a barrier against environmental elements. Once installed, it requires no further action for daily use.
- Temperature Regulation: Helps maintain desired indoor temperatures by preventing hot or cold air from entering or escaping.
- Noise Reduction: Can contribute to minimizing sound transfer through door gaps.
- Pest and Dust Barrier: Acts as a physical barrier against insects, dust, and dirt.
- Light Blocking: Reduces light seepage from under the door, enhancing privacy and darkness.
Image 4.1: The draft stopper in place at the bottom of a door, highlighting its benefits for regulating air, blocking light/critters, insulating sound, and its versatility for windows and doors.
5. Care and Maintenance
To ensure the longevity and effectiveness of your GORILLA GRIP Door Draft Stopper, follow these simple care instructions:
- Spot Clean Only: For minor dirt or spills, use a damp cloth with mild soap to gently spot clean the fabric surface.
- Air Dry: Allow the stopper to air dry completely after cleaning. Do not machine wash or tumble dry.
- Storage: When not in use, the stopper can be hung using its integrated handles for convenient storage.
Image 5.1: The draft stopper hanging by its loops, demonstrating the easy storage feature.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stopper slides or moves easily. | PVC grip dots not making full contact or floor surface is too smooth. | Ensure grip dots are facing down. If on a very smooth surface, consider using the optional hook and loop fastener for better stability. |
| Does not block drafts effectively. | Gap is larger than 3 inches, or stopper is not positioned correctly. | Verify the gap size. Reposition the stopper to ensure it is snug against the door and floor. Ensure the correct length stopper was purchased for your door. |
| Stopper gets caught under the door when opening/closing. | Stopper is not flat or grip dots are not engaged. | Ensure the stopper is lying flat with grip dots on the floor. If the issue persists, use the optional hook and loop fastener to attach it directly to the door. |
7. Product Specifications
| Attribute | Detail |
|---|---|
| Model | 36 Inch, Slate Gray |
| Color | Gray |
| Material | Sand, Cotton, Fabric |
| Maximum Gap Fill | 3 Inches |
| Weight | 2.2 Pounds (approximate) |
| Manufacturer | Hills Point Industries, LLC |
Image 7.1: Illustration of various available lengths (32", 34", 36", 38") and the consistent 3" height of the draft stopper.
8. Warranty and Support
For information regarding product warranty, returns, or customer support, please refer to the retailer's policy where the product was purchased or visit the official GORILLA GRIP website. General return policies typically allow for returns within 30 days of purchase.
For direct inquiries, you may visit the GORILLA GRIP Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.