Yurnomy 21000 Lumen 2-Head LED Work Light with Tripod Stand

1. Product Overview

The Yurnomy 2-Head LED Work Light with Tripod Stand is designed to provide powerful and adjustable illumination for various work environments. Featuring two independent LED light heads, a foldable and height-adjustable tripod, and a durable, waterproof construction, this work light is suitable for both indoor and outdoor applications.

Each light head delivers 21000 lumens of bright, 6500K white light, ensuring clear visibility. The light heads can be rotated 360 degrees horizontally and vertically, allowing precise light direction. The tripod stand is designed for easy transport and storage.

Image 1.1: Yurnomy 2-Head LED Work Light with Tripod Stand, illustrating the assembled unit and the compact, folded tripod for portability.

2. Safety Information

• Electrical Safety: Ensure the power cord and plug are in good condition before each use. Do not operate with damaged cords. Connect to a grounded outlet.
• Heat Warning: The LED light heads can become hot during operation. Avoid direct contact with the light housing when in use or immediately after turning off. Allow sufficient cooling time before handling.
• Water Resistance: This product features an IP65 waterproof rating, protecting against dust and low-pressure water jets. It is suitable for outdoor use in various weather conditions, but should not be submerged in water.
• Stable Placement: Always ensure the tripod stand is placed on a stable, level surface to prevent tipping. Extend the tripod legs fully for maximum stability.
• Eye Protection: Avoid staring directly into the illuminated LED lights, as the high brightness can cause eye strain or temporary vision impairment.

Image 2.1: Illustration of the work light's IP65 waterproof design, demonstrating its suitability for use in various indoor and outdoor environments, including light rain.

3. Package Contents

Verify that all components are present and undamaged upon unpacking:

• 2 x LED Light Heads (70W each)
• 1 x Adjustable Tripod Stand
• 1 x Crossbar for mounting light heads
• 1 x Power Cord with Safety Three-hole Plug
• Instruction Manual

4. Setup Instructions

Follow these steps to assemble and set up your work light:

1. Unfold the Tripod: Place the tripod stand on a flat, stable surface. Extend the legs outwards until they are fully spread and locked into position, ensuring maximum stability.
2. Adjust Tripod Height: Loosen the twist-lock knobs on the telescoping pole sections. Extend the pole to the desired height and securely tighten the knobs to lock it in place.
3. Attach Crossbar: Secure the crossbar to the top of the tripod pole. Ensure it is firmly seated and tightened.
4. Mount Light Heads: Attach each LED light head to the crossbar using the provided mounting hardware. Ensure they are securely fastened.
5. Connect Power: Plug the power cord into a standard 120V grounded electrical outlet.

Image 4.1: Visual guide for assembling the Yurnomy work light, detailing the steps from tripod setup to light head attachment.

Image 4.2: Overview of the work light's adjustability, showing how to modify height and rotate the light heads for optimal illumination.

5. Operating Instructions

Once assembled and connected to power, operate the work light as follows:

• Power On/Off: Each light head is equipped with an individual switch located on the back of the housing. Press the switch to turn the light head on or off.
• Adjust Light Direction: The light heads can be rotated 360 degrees horizontally and vertically. Loosen the adjustment knobs on the light head mounts, position the lights as needed, and then securely tighten the knobs.
• Detachable Use: The light heads can be detached from the tripod and used independently. This allows for greater flexibility in directing light to specific areas or for handheld use.

Image 5.1: Detailed view of the light head features, highlighting the tempered glass, individual switch for each light, and the robust power plug.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your work light:

• Cleaning: Disconnect the power before cleaning. Use a soft, damp cloth to wipe down the light heads and tripod. Avoid abrasive cleaners or solvents that could damage the finish or electrical components.
• Storage: When not in use, fold the tripod stand for compact storage. Store the work light in a dry, cool place, away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the power cord, plug, and all connections for any signs of wear or damage. If damage is found, discontinue use and contact support.

7. Troubleshooting

If you encounter issues with your work light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

This Yurnomy product is covered by a 3-year warranty service. If you experience any defects or issues with the product, please contact the seller or manufacturer's customer support for assistance. Provide your purchase details and a description of the issue to facilitate the support process.

For further inquiries or technical support, please refer to the contact information provided at the point of purchase or on the official Yurnomy website.