CT Copper Tailor 30 in. Range Hood User Manual

1. Product Overview

The CT Copper Tailor 30-inch wall-mount convertible range hood is designed to efficiently remove cooking odors, smoke, and fumes, ensuring a fresh kitchen environment. Its antique copper finish adds a unique and elegant touch to any kitchen decor. This unit features a powerful 610 CFM blower, a user-friendly touch control panel, and energy-efficient LED lighting.

Key Features:

• Powerful Ventilation: 610 CFM blower with 4-speed settings for efficient air purification.
• Convertible Design: Can be used as ducted or ductless (recirculating) with included carbon filters.
• User-Friendly Controls: Screen touch control panel with LCD backlit display and remote control for convenience.
• Efficient Lighting: Two 1.5W LED lights with two brightness levels to illuminate your cooking area.
• Easy Maintenance: Removable and dishwasher-friendly stainless steel baffle filters.
• Adjustable Chimney: Suitable for 8 to 9-foot ceilings.

Image 1.1: Front view of the CT Copper Tailor 30-inch wall-mount range hood, showcasing its antique copper finish and integrated control panel.

2. Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, observe the following:

• Read all instructions thoroughly before installation and operation.
• Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting.
• When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
• Ducted fans must always be vented to the outdoors.
• Clean grease laden surfaces frequently. Grease accumulating on filters or surfaces can ignite.
• Always turn off power to the range hood at the service panel before servicing or cleaning.

3. Package Contents

Verify that all components are present and undamaged before beginning installation.

• Range Hood Main Unit
• Adjustable Chimney Cover (Upper and Lower sections)
• Stainless Steel Baffle Filters (2 pcs)
• Power Cord (3-prong plug)
• Duct Pipe (6" Round)
• Damper
• Mounting Brackets and Hardware (screws, anchors)
• Round Carbon Filters (2 pcs, for ductless conversion)
• Remote Control
• User Manual

Image 3.1: All accessories included with the range hood, laid out for inspection.

4. Installation Guide

4.1 Planning the Installation

Before installation, ensure you have the necessary tools and that the installation area meets the product's dimensions and electrical requirements. The hood can be installed as ducted (vented to the outside) or ductless (recirculating with carbon filters).

• Duct Requirements: 6-inch round ducting for ducted installation.
• Ceiling Height: The adjustable chimney is suitable for 8 to 9-foot ceilings.
• Electrical: 120V / 60Hz, 3-prong plug.

Image 4.1: Diagram showing the dimensions of the range hood: 29.53" W x 19.69" D x 40.35" H (maximum height with chimney).

4.2 Mounting the Hood

1. Determine the desired mounting height above your cooking surface.
2. Mark the drilling points for the mounting brackets on the wall.
3. Drill holes and insert wall anchors if necessary.
4. Secure the mounting brackets to the wall.
5. Carefully lift the range hood and hang it onto the mounting brackets.
6. Connect the ducting (if ducted) or install carbon filters (if ductless).
7. Connect the power cord to a grounded electrical outlet.
8. Install the adjustable chimney cover sections.

Image 4.2: Close-up view of the included power cord and the 6-inch round top vent connection point on the range hood.

5. Operating Instructions

The range hood features a screen touch control panel and can also be operated via the included remote control.

5.1 Control Panel Functions

Image 5.1: Detailed view of the multi-function touch control panel with icons for Timer, Lamp, Speed, and Power.

• Power Button (⏻): Press to turn the range hood ON or OFF.
• Fan Speed Button (⚙): Press to cycle through the 4 fan speed settings (Low, Medium, High, Max). The current speed will be displayed on the LCD.
• Light Button (💡): Press to turn the LED lights ON or OFF. Some models may have multiple brightness levels; press again to cycle.
• Timer Button (⏱): Press to activate the delay shut-off timer. The timer duration can typically be adjusted by repeated presses.

5.2 Remote Control

The remote control provides the same functionality as the touch control panel, allowing for convenient operation from a distance (up to 16 feet).

6. Care and Maintenance

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your range hood.

6.1 Cleaning the Baffle Filters

The stainless steel baffle filters are designed to trap grease and are washable and detachable.

Image 6.1: Close-up view of the two stainless steel baffle filters, highlighting their washable, detachable, and corrosion-resistant properties.

1. Ensure the range hood is turned OFF and unplugged from the power outlet.
2. Locate the release latches on each baffle filter.
3. Push the latch and gently pull down the filter to remove it.
4. Clean the filters in a dishwasher or by hand using hot water and a mild detergent. For stubborn grease, soak them before cleaning.
5. Allow filters to dry completely before re-installing.
6. Insert the filters back into their slots and push until the latches click into place.

6.2 Cleaning Exterior Surfaces

Wipe the exterior surfaces with a soft cloth dampened with mild soap and water. Do not use abrasive cleaners or scouring pads, as they can damage the finish.

7. Troubleshooting

Refer to the table below for common issues and their potential solutions.

8. Product Specifications

Detailed technical specifications for the CT Copper Tailor 30 in. Range Hood.

9. Warranty and Customer Support

9.1 Warranty Information

This CT Copper Tailor range hood comes with an industry-leading one-year parts warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact CT Copper Tailor customer support. Refer to the product packaging or the seller's website for the most current contact information.

When contacting support, please have your product model number (AWS303A) and purchase date readily available.