1. Introduction
Thank you for choosing the Exbom LCB-150 USB Laser Barcode Scanner. This device is designed for efficient and accurate scanning of various barcodes, including those found on bills, invoices, and products. It features a high-speed laser engine and a simple USB interface for easy integration into your system.
Package Contents:
- 1x Wired USB Laser Barcode Scanner
- 1x User Manual
Image 1.1: The Exbom LCB-150 USB Laser Barcode Scanner, showing the scanner unit and its integrated USB cable.
2. Setup
The Exbom LCB-150 scanner is a plug-and-play device, requiring no special driver installation for most operating systems.
- Connect the Scanner: Locate an available USB port on your computer (Desktop, Laptop, Tablet, or POS system). Insert the USB cable from the scanner into the USB port.
- System Recognition: Your operating system should automatically detect and install the necessary drivers. This process may take a few moments.
- Ready for Use: Once the system indicates that the device is ready, the scanner is prepared for operation.
Image 2.1: Side view of the scanner, highlighting its ergonomic design and the blue trigger button.
3. Operating Instructions
The Exbom LCB-150 is designed for straightforward barcode scanning.
- Power On: The scanner is powered via the USB connection. Ensure it is properly connected to your computer.
- Positioning: Hold the scanner with the scanning window facing the barcode.
- Scanning: Press and hold the trigger button. A red laser line will emit from the scanning window. Aim the laser line across the entire barcode.
- Successful Scan: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., the laser turning off briefly or a green light). The scanned data will appear in the active application on your computer (e.g., a text editor, spreadsheet, or POS software).
- Adjusting Reading Distance: The optimal reading distance can vary depending on the barcode type and size. If the scanner does not recognize a barcode, try moving it closer or further away until a successful scan occurs. With practice, you will become familiar with the ideal reading distance for various barcodes.
- FEBRABAN Layout Compatibility: This scanner is compatible with the standard FEBRABAN layout, making it suitable for reading Brazilian bank slips (boletos) and other related documents.
Image 3.1: A close-up view of the scanner's window, showing the active red laser line during operation.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your barcode scanner.
- Cleaning the Scanning Window: Regularly clean the scanning window with a soft, lint-free cloth. If necessary, use a small amount of mild glass cleaner applied to the cloth (not directly to the scanner). Avoid abrasive materials or harsh chemicals.
- General Cleaning: Wipe the body of the scanner with a soft, damp cloth. Do not immerse the scanner in water or any cleaning solution.
- Storage: When not in use, store the scanner in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Cable Care: Avoid bending or twisting the USB cable excessively, as this can damage the internal wires.
5. Troubleshooting
If you encounter issues with your Exbom LCB-150 scanner, refer to the following common problems and solutions:
- Scanner Not Responding:
- Ensure the USB cable is securely connected to both the scanner and the computer.
- Try connecting the scanner to a different USB port on your computer.
- Restart your computer.
- No Laser Light:
- Verify the scanner is properly connected and receiving power.
- Press the trigger button firmly.
- Barcode Not Scanning:
- Adjust Distance: Move the scanner closer to or further away from the barcode. The optimal distance varies.
- Ensure the laser line covers the entire barcode.
- Check if the barcode is damaged, smudged, or poorly printed. The scanner may not be able to read severely compromised barcodes.
- Ensure there is sufficient lighting, but avoid direct glare on the barcode.
- Incorrect Data Scanned:
- Ensure the barcode is fully covered by the laser line and scanned cleanly.
- Check your application settings to ensure it is configured to receive barcode input correctly.
6. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Exbom |
| Model | LCB-150 |
| Product Type | Office Products |
| Reading Rate | 200 scans per second |
| Connectivity Technology | USB Cable |
| Interface | USB 2.0 High Speed (480Mbps) |
| Compatible Devices | Desktop, Laptop, Tablet, Smartphone (with USB port), POS (with USB port) |
| Power Source Type | Corded Electric |
| Battery Operated | No |
| Optical System | Visible red LED light source of 660 nm |
| Scanning Resolution | 4000 pixels |
| Minimum Reading Length | 30 mm |
| Light Tolerance | 10000 Lux max (fluorescent), 5000 Lux max (sunlight) |
| PCS Value | 30% or more |
| Resolution | 5 mil (0.2mm) |
| Voltage | 5V DC ± 5% |
| Operating Current | 100 - 120 mA |
| Stand-by Current | 45 - 50 mA |
| Power-on Current | 125 mA |
| Product Weight | 4 Kilograms |
| Product Dimensions | 7 x 10 x 20 cm |
| Package Dimensions | 20 x 10 x 7 cm |
7. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions.
For technical support or further assistance, please contact the vendor or retailer from whom you purchased the product. They will be able to provide guidance or direct you to the appropriate support channels.
