Introduction
Thank you for choosing the LOKEME Portable Wardrobe Closet. This manual provides essential information for the correct assembly, operation, and maintenance of your new wardrobe. Designed for efficient clothing storage, this portable closet features a sturdy steel frame, multiple shelves, and hanging rods, all enclosed within a durable non-woven fabric cover.
The LOKEME Portable Wardrobe Closet provides ample storage with hanging rods and multiple shelves, enclosed by a black fabric cover.
Safety Information
- Avoid contact with liquids to prevent damage to the fabric and potential rust on metal components.
- Ensure proper assembly and use to prevent tip-over. Always distribute weight evenly.
- Keep away from children to prevent accidents during assembly or use.
- Do not overload shelves or hanging rods beyond their specified weight capacity.
Setup and Assembly
The LOKEME Portable Wardrobe Closet is designed for easy assembly. Please follow these steps carefully.
Parts List
Before starting assembly, verify that all parts are present:
| Part | Description | Quantity |
|---|---|---|
| Steel Pipes (19mm) | Main structural support | Various lengths (refer to diagram) |
| PP Plastic Connectors | Joins steel pipes | Various types (refer to diagram) |
| Non-woven Fabric Cover | Outer covering with zippers and side pockets | 1 |
| Storage Shelves | Fabric shelves for folded items | 6 |
| Hanging Rods | For hanging clothes | 3 |
| Small Hammer (optional) | For securing connections | 1 |
Assembly Steps
- Unpack and Identify Parts: Lay out all components and identify them using the provided parts list and diagrams.
- Build the Base: Connect the shortest steel pipes with the appropriate plastic connectors to form the bottom rectangular sections. Ensure all connections are secure.
- Add Vertical Supports: Insert the vertical steel pipes into the connectors of the base.
- Install Lower Shelves: Place the fabric shelves onto the designated pipe sections. Ensure they are taut and properly supported.
- Continue Building Upwards: Repeat steps 2-4 for each level, gradually building the frame upwards. Remember to rotate the steel tubes when inserting them into connectors for a tighter fit.
- Install Hanging Rods: Attach the three hanging rods to the top sections of the frame.
- Apply Fabric Cover: Drape the non-woven fabric cover over the assembled frame. Ensure the zippers align correctly with the front opening.
The sturdy metal frame of the LOKEME Portable Wardrobe Closet, ready for the fabric cover and internal shelves.
For proper assembly, rotate the steel tubes while inserting them into the connectors to ensure a snug fit and prevent detachment.
Assembly Video
Official LOKEME video demonstrating the assembly process and highlighting the load capacity of the portable wardrobe closet.
Operating Instructions
The LOKEME Portable Wardrobe Closet offers versatile storage options:
- Hanging Area: Use the three hanging rods for coats, shirts, dresses, and other garments that require hanging.
- Storage Shelves: The six storage shelves are ideal for folded clothes, blankets, pillows, bags, or hats.
- Side Pockets: Utilize the four side pockets for smaller items such as scarves, gloves, sunglasses, or other accessories.
- Dust Protection: Zip up the non-woven fabric cover to protect your clothes from dust and keep them tidy. The cover can also be rolled up and secured with Velcro ties for easy access.
The wardrobe is designed with distinct sections: a hanging area for coats and trousers, storage shelves for folded items, and side pockets for small accessories.
Maintenance
- Cleaning: Wipe the non-woven fabric cover and steel pipes with a dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all connections to ensure they remain secure. Tighten any loose pipes or connectors.
- Weight Distribution: Always distribute the weight of your items evenly across the hanging rods and shelves to maintain stability and prevent damage.
Troubleshooting
- Wardrobe is Unstable: Ensure all steel pipes are fully inserted into their connectors. Gently tap connections with a rubber mallet if necessary to secure them. Verify that the weight is evenly distributed.
- Fabric Cover Does Not Fit: Double-check that the frame is assembled according to the instructions and that all pipes are correctly positioned. The cover should fit snugly.
- Zippers are Stuck: Apply a small amount of zipper lubricant or a pencil lead to the zipper teeth to help it glide smoothly. Avoid forcing the zipper.
- Shelves are Sagging: Ensure the shelves are properly installed and supported by the frame. Reduce the weight on the sagging shelf if it exceeds the recommended capacity.
Specifications
- Product Dimensions: 51.7 x 18.2 x 70.6 inches (Width x Depth x Height)
- Item Weight: Approximately 7.4 ounces (210 Grams)
- Material: Non-woven Fabric, Metal Tube (19mm diameter, 0.32mm thickness), PP Plastic Connectors
- Number of Shelves: 6 (plus 3 hanging rods)
- Special Feature: Removable Shelf, Side Pockets
- Style: Modern
- Product Care Instructions: Wipe with Dry Cloth
The overall dimensions of the LOKEME Portable Wardrobe Closet are 51.7 inches (width) x 18.2 inches (depth) x 70.6 inches (height).
The wardrobe's robust design allows each hanging rod to support up to 44 lbs and each shelf up to 22 lbs, providing reliable storage.
Warranty and Support
For any questions, concerns, or support regarding your LOKEME Portable Wardrobe Closet, please contact LOKEME customer service. While specific warranty details are not provided in this manual, additional protection plans may be available for purchase.
Please refer to your purchase documentation or the retailer's website for the most current warranty information and customer support contact details.