GMURA 500A 12V Remote Battery Disconnect Switch with Digital Display & Manual Switch
GMURA Battery Kill Switch User Manual
Model: 500A 12V Remote Battery Disconnect Switch with Digital Display & Manual Switch
Brand: GMURA
1. Product Overview
The GMURA 500A 12V Remote Battery Disconnect Switch is designed to protect your vehicle's battery from discharge due to long-term parking, electronic device power consumption, line aging, or forgotten lights. This device helps maximize battery life and ensures normal vehicle operation by allowing you to disconnect the battery remotely or manually.
Figure 1: GMURA Battery Kill Switch and accessories including remote controls, gloves, and tools.
Key Features:
- Battery Protection: Prevents battery drain from various sources, extending battery lifespan.
- Remote Control: Allows remote power-off and power-on for convenience.
- Manual Override: Features a manual switch for power control, ensuring functionality even if the remote is lost or unavailable.
- Automatic Voltage Detection: LED screen displays battery voltage. Automatically cuts off power if voltage drops below 11.8V to save power.
- Wide Compatibility: Suitable for most DC 12V cars, boats, RVs, travel trailers, trucks, ATVs, UTVs, and motorcycles.
- Low Standby Current: Operates with a standby current of 5mA, significantly lower than typical vehicle standby currents.
Figure 2: Common scenarios leading to battery drain that this switch helps prevent.
2. Installation Guide
Proper installation is crucial for the safe and effective operation of your battery kill switch. Please follow these steps carefully.
Important Safety Precaution:
Before beginning installation, always turn off the vehicle's power and disconnect the battery to prevent electrical hazards.
- Prepare the Battery: Ensure the vehicle's power is off and the existing battery terminals are disconnected.
- Install the Switch: The kill switch is designed to be installed on the negative terminal of your 12V battery.
Figure 3: Illustration of replacing the terminal post and inserting the negative electrode into the switch.
The kit includes a 9-13mm small pile head kit for compatibility with various battery terminals.
- Connect Wiring: Connect the kill switch according to the provided wiring diagram. The main unit connects to the battery's negative terminal, and the auxiliary wires connect to the battery's positive terminal and the vehicle's electrical system.
Figure 4: Detailed wiring diagram for connecting the battery kill switch.
- Secure Connections: Ensure all connections are tight and secure to prevent loose contacts and potential issues.
- Post-Installation Test: After installation, conduct an ignition test to confirm proper functionality. If any issues arise, refer to the troubleshooting section or contact technical support.
Figure 5: Professional installation is recommended if you are unsure about the process.
3. Operating Instructions
The GMURA Battery Kill Switch offers both remote and manual control options, along with an automatic detection feature.
Remote Control Operation:
Use the provided remote control to power on or power off the vehicle's electrical system. This is ideal for quickly disconnecting power when parking for extended periods or as an anti-theft measure.
Figure 6: Remote control functionality for convenient power management.
Press the "unlock" button on the remote to turn the power ON. Press the "lock" button to turn the power OFF.
Manual Control Operation:
The main unit features "ON" and "OFF" buttons for manual control. This is useful if the remote control is not available or if you prefer direct control.
Figure 7: Manual control buttons and LED display on the main unit.
Press the "ON" button to turn the power ON. Press the "OFF" button to turn the power OFF.
Automatic Detection Feature:
- Low Voltage Cut-off: The LED screen displays the battery voltage. If the voltage drops below 11.8V, the power supply is automatically cut off to prevent deep discharge and save battery power.
- High Voltage Behavior: If the voltage is higher than 13.2V, manual mode is required to control the power on or off by pressing the buttons on the panel.
Figure 8: Automatic and manual power control based on battery voltage levels.
Official Product Video:
Video 1: Demonstrates the remote and manual power control features of the battery disconnect switch, including the automatic voltage display and the use of the small pile head kit.
4. Maintenance
To ensure the longevity and optimal performance of your GMURA Battery Kill Switch, consider the following maintenance tips:
- Keep Connections Clean: Periodically inspect all electrical connections for corrosion or looseness. Clean terminals and connections as needed to ensure good conductivity.
- Keep Dry: While designed for automotive environments, avoid direct exposure to excessive moisture or submersion.
- Inspect Wiring: Check the wiring for any signs of wear, fraying, or damage. Replace damaged wires immediately.
- Remote Battery: If the remote control's range decreases or it becomes unresponsive, consider replacing its internal battery.
5. Troubleshooting
If you encounter issues with your GMURA Battery Kill Switch, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not power on/off via remote. | Remote battery is dead; remote is out of range; interference; switch unit malfunction. | Replace remote battery. Ensure you are within range. Try manual control. Check for strong electrical interference. |
| No power to vehicle after switch is "ON". | Loose connections; incorrect wiring; internal unit failure; vehicle battery is dead. | Check all wiring connections for tightness and correct polarity. Verify battery charge. If issues persist, contact support. |
| Automatic cut-off occurs too frequently or unexpectedly. | Battery voltage is genuinely low; faulty voltage sensor. | Check battery health with a multimeter. Ensure the battery is fully charged. If the battery is healthy, the unit might be faulty. |
| LED display is not working. | Power issue to the unit; internal display fault. | Verify power supply to the switch. If power is present, the display may be faulty. |
6. Product Specifications
| Specification | Detail |
|---|---|
| Brand | GMURA |
| Operation Mode | Automatic, Remote, Manual |
| Current Rating | 180 Amps (Max 500A) |
| Operating Voltage | 12 Volts DC |
| Contact Type | Remote, Manual |
| Connector Type | Screw Terminals |
| Terminal | Screw |
| Circuit Type | 1-way |
| Mounting Type | Panel Mount |
| Actuator Type | Push Button |
| Standby Current | 5mA |
| Package Dimensions | 7.76 x 5.55 x 2.2 inches |
| Item Weight | 1.17 Pounds |
7. Warranty and Support
GMURA is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, technical support is available to assist you with any installation or usage issues.
For technical assistance or inquiries, please refer to the contact information provided with your purchase or visit the official GMURA store on Amazon: GMURA Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.