1. Introduction
Thank you for choosing the KISSBOBO ABP-1508 Wearable Hands-Free Breast Pump. This device is designed to provide efficient and comfortable milk expression, allowing for greater flexibility during your breastfeeding journey. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your breast pump.
The ABP-1508 features a lightweight design, strong suction, and multiple modes and intensity levels to suit individual preferences. It is engineered for quiet operation and includes a portable storage solution for convenience.
2. What's in the Box
Please check the package contents to ensure all items are present:
- Electric Breast Pump (2 units)
- Breast Flange (2 units, typically 24mm pre-installed)
- Flange Inserts (21mm, 19mm, 17mm - 2 units each)
- Power Cable (USB-C, 2 units)
- Underwear Extension Strap (2 units)
- Storage Bag (1 unit)
- Valve (2 units, plus spares)
- Silicone Diaphragm (2 units, plus spares)
- Linker Cover (2 units)
- Milk Collection Cup (2 units)
Image: Contents of the KISSBOBO ABP-1508 Wearable Breast Pump package, including two pump units, a storage bag, and various accessories like flanges and cables.
3. Safety Information
- Read all instructions before using the breast pump.
- This product is a single-user device. Do not share to prevent cross-contamination.
- Always inspect all pump components before each use for damage or wear. Replace any damaged parts immediately.
- Ensure all parts are clean and sterilized before first use and after each subsequent use.
- Do not immerse the pump motor unit in water or other liquids.
- Keep out of reach of children.
- Use only the power cables provided by KISSBOBO.
- If you experience pain or discomfort during pumping, discontinue use and consult a healthcare professional.
4. Setup
4.1 Charging the Pump
Before first use, fully charge the breast pump motor unit. Connect the provided USB-C power cable to the charging port on the motor unit and plug it into a suitable USB power adapter (not included). A full charge takes approximately 2.5 hours and provides power for 6-8 pumping sessions. The LCD display will show the battery level.
Image: The breast pump's control panel displaying the battery level and charging status. A clear battery level display and low battery alert help manage usage time.
4.2 Assembly Instructions
Assemble the breast pump in 5 simple steps, typically within 20 seconds:
- Insert the valve into the bottom of the linker cover.
- Place the silicone diaphragm onto the linker cover, ensuring a secure seal.
- Attach the assembled linker cover with diaphragm and valve to the milk collection cup.
- Connect the pump motor unit to the top of the silicone diaphragm.
- Insert the appropriate size flange insert into the milk collection cup opening (if using an insert).
Image: An exploded diagram illustrating the five steps for quickly assembling the KISSBOBO breast pump components: Flange Insert, Valve, Linker Cover, Silicone Diaphragm, Milk Bowl, and Pump Motor.
4.3 Flange Sizing
Selecting the correct flange size is crucial for comfort and efficient milk expression. The ABP-1508 includes 24mm flanges and inserts for 21mm, 19mm, and 17mm. To determine your correct size, measure the diameter of your nipple (not the areola) at its base after a pumping session. The flange tunnel should be 2-4mm larger than your nipple diameter.
- 17mm Insert: For nipple diameters approximately 13-15mm.
- 19mm Insert: For nipple diameters approximately 15-17mm.
- 21mm Insert: For nipple diameters approximately 17-19mm.
- 24mm Flange: For nipple diameters approximately 20-22mm.
Image: Four clear silicone flange inserts with measurements 17mm, 19mm, 21mm, and 24mm, demonstrating the variety of sizes available to ensure a comfortable and effective fit.
5. Operating Instructions
5.1 Power On/Off
Press and hold the power button on the motor unit to turn the pump on or off. The LCD screen will illuminate, displaying the current mode and intensity level.
5.2 Modes and Intensity Levels
The ABP-1508 offers 3 distinct modes and 9 adjustable intensity levels to customize your pumping experience:
- Stimulation Mode: Mimics a baby's quick, light suckling to initiate milk let-down.
- Expression Mode: Provides slower, stronger suction to efficiently express milk once let-down occurs.
- Massage Mode: A gentle, rhythmic pattern designed to comfort and stimulate milk flow.
Press the 'M' button to cycle through the modes. Use the '+' and '-' buttons to adjust the suction intensity within each mode (levels 1-9). The pump has a memory function that will recall your last used settings.
Image: A visual representation of how the breast pump boosts milk flow, showing improvements in milk expression efficiency and let-down time.
5.3 Pumping Session
Place the assembled pump unit directly onto your breast, ensuring your nipple is centered in the flange tunnel. Wear a supportive nursing bra to hold the pump securely in place. Begin with Stimulation Mode to encourage let-down, then switch to Expression Mode. Adjust the intensity to a comfortable yet effective level. A typical pumping session lasts 10-15 minutes.
Image: A woman using the lightweight wearable breast pump while working on a laptop, demonstrating its hands-free and portable nature. The pump weighs 193g.
5.4 Quiet Operation
The ABP-1508 is designed with ultra-quiet technology, operating at a low noise level (typically below 40dB), comparable to a library whisper. This allows for discreet pumping in various environments, including at night or in public.
Image: A graph illustrating the low noise level of the KISSBOBO breast pump (below 40dB) compared to other pumps, emphasizing its quiet operation for discreet use.
6. Maintenance and Cleaning
Proper cleaning and maintenance are essential for hygiene and the longevity of your breast pump.
6.1 Disassembly
After each use, carefully disassemble all parts that come into contact with breast milk: the milk collection cup, flange, flange insert, linker cover, silicone diaphragm, and valve.
6.2 Cleaning
- Rinse all disassembled parts with cold running water to remove milk residue.
- Wash parts in warm, soapy water using a mild dish soap. Use a soft brush to clean hard-to-reach areas.
- Rinse thoroughly with clean water.
- Air dry on a clean paper towel or drying rack. Avoid using cloth towels as they can transfer germs.
- The motor unit should be wiped clean with a damp cloth only. Do not wash or sterilize the motor unit.
6.3 Sterilization
Sterilize all milk-contact parts at least once a day. This can be done by:
- Boiling: Place parts in a pot of boiling water for 5 minutes.
- Steam Sterilizer: Use a microwave or electric steam sterilizer according to its instructions.
- Dishwasher: Some parts may be top-rack dishwasher safe (check product specifications or manufacturer guidelines).
6.4 Storage
Store clean, dry parts in the provided storage bag or a clean, covered container when not in use. Keep the motor unit in a dry place away from direct sunlight.
Image: A compact pink storage bag designed to hold the breast pump units and accessories, demonstrating its portability and ease of storage for mothers on the go.
7. Troubleshooting
If you encounter any issues with your KISSBOBO ABP-1508 breast pump, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No suction or weak suction |
|
|
| Pump not turning on |
|
|
| Milk leaking from pump |
|
|
| Discomfort during pumping |
|
|
8. Specifications
- Model Number: ABP-1508
- Product Dimensions: 6.22 x 5.04 x 2.76 inches
- Weight: Approximately 1.96 Pounds (for 2 units, individual pump unit is approx. 7oz / 193g)
- Power Source: Battery Powered (Lithium Polymer batteries included)
- Charging Time: Approximately 2.5 hours for full charge
- Usage Time: 6-8 sessions per full charge
- Modes: 3 (Stimulation, Expression, Massage)
- Intensity Levels: 9 levels per mode
- Noise Level: <40dB
- Material: Acrylonitrile Butadiene Styrene, Plastic, Silicone (BPA-free)
- Flange Sizes Included: 24mm (pre-installed), with 17mm, 19mm, 21mm inserts
- Manufacturer: Huizhou LVB Maternal And Infant Supplies Co,Ltd.
9. Warranty and Support
KISSBOBO is committed to customer satisfaction. Your ABP-1508 breast pump is covered by a 90-day replacement or money-back guarantee. Technical support is available for the lifetime of the product.
For any questions, concerns, or technical assistance, please contact the seller directly through your Amazon order page. Look for the 'Ask a question' button on the seller's profile or order details.
10. Important Note Regarding Videos
While the product listing indicates the presence of videos, specific URLs and metadata (such as 'creator_type') required for embedding them according to the instructions were not provided in the source data. Therefore, no videos could be embedded in this manual.
