Powered Water Flosser User Manual

Introduction

This manual water flosser uses air-powered water to efficiently clean between teeth and remove food debris, plaque, and bacteria. It's gentle on sensitive teeth and gums, offering deep cleansing. Ideal for braces, bridges, implants, and more. No batteries or cords required, making it easy to carry for travel. Safer to use than some electrically pressurized flossers.

This manual provides essential information for the safe and effective use of your Powered Water Flosser. Please read it thoroughly before operation and retain it for future reference.

Safety Information

For safe and proper use, keep out of reach of children. Do not use near water sources or while bathing. Avoid contact with eyes and sensitive areas. If a malfunction occurs, unplug the device and seek professional repair.

Important: This device is designed for oral hygiene only. Do not use for any other purpose.

Setup

Follow these steps to prepare your Powered Water Flosser for use:

1. Fill the water reservoir: Fill the water reservoir with water. You may use tap water or mouthwash. Ensure the reservoir is securely attached to the main unit.
2. Attach the flossing tip: Choose your desired flossing tip and attach it firmly to the flosser's nozzle. Ensure it clicks into place to prevent leaks during operation.
3. Select pressure setting (if applicable): This manual flosser operates on air pressure. No specific pressure settings are adjustable by the user. The pressure is generated by pressing the activation button.

Image showing the product packaging with visual instructions for filling the reservoir, pressing the button, and flossing.

Diagram illustrating the three easy steps for using the Power Floss: fill, press, and floss, along with before and after images of teeth.

Operating Instructions

Once the flosser is set up, follow these steps for effective cleaning:

1. Positioning: Lean over a sink to avoid splashing. Place the flossing tip inside your mouth, aiming it towards your teeth and gums.
2. Activate Flosser: Press the green button on the side of the flosser to release a burst of air-powered water.
3. Flossing Technique: Aim the flossing tip at the gumline at a 90-degree angle and gently press the tip against the gumline. Move the flosser along the gumline and in between teeth, pausing briefly between each tooth to allow the water jet to clean thoroughly.
4. Completion: When finished, release the button to stop the water flow. Remove the flossing tip from your mouth.
5. Empty Reservoir: It is recommended to empty any remaining water from the reservoir after each use to prevent bacterial growth.

A smiling individual, demonstrating the target user for the water flosser, with the product visible.

A person holding the Igia water flosser, illustrating its portable and easy-to-handle design.

Maintenance

Proper maintenance ensures the longevity and hygiene of your water flosser:

• Cleaning the Tip: After each use, rinse the flossing tip under running water. For a deeper clean, you can soak the tip in a denture cleaning solution or a mixture of water and white vinegar periodically.
• Cleaning the Reservoir: Rinse the water reservoir thoroughly with clean water after each use. Allow it to air dry completely before reassembling or storing.
• Cleaning the Main Unit: Wipe the exterior of the main unit with a soft, damp cloth. Do not submerge the main unit in water.
• Storage: Store the flosser in a clean, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your Powered Water Flosser, refer to the following common problems and solutions:

• No water flow:
  • Ensure the water reservoir is filled and securely attached.
  • Check if the flossing tip is properly attached and not clogged.
  • Verify that the activation button is being pressed fully.
• Weak water pressure:
  • Ensure the reservoir is adequately filled.
  • Check for any blockages in the flossing tip or internal components.
  • Ensure the activation button is pressed with sufficient force.
• Leaking:
  • Ensure the water reservoir is securely tightened.
  • Verify that the flossing tip is firmly attached.
  • Inspect seals for any damage or wear.

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Warranty and Support

This product comes with a standard manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation included with your purchase or visit the official Igia website.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Igia customer service. Contact information can typically be found on the product packaging or the brand's official website.

Please retain your proof of purchase for warranty purposes.