1. Product Overview
The DENFOON Motorized Blackout Roller Shades offer a convenient and efficient solution for window covering. These shades feature a cordless design, remote control operation, and a complimentary solar panel for charging. They are designed to provide 100% blackout, thermal insulation, and UV protection.
Key Features:
- Motorized operation with included remote control.
- Cordless design for enhanced safety.
- Integrated solar panel for continuous charging.
- 100% blackout fabric with thermal insulation and UV protection.
- Compatible with smart home systems (Amazon Alexa, Google Assistant) via an optional smart bridge.

2. Package Contents
Verify that all components are present before beginning installation:
- Motorized Roller Shade (1 unit)
- Remote Control (1 unit)
- Solar Panel (1 unit)
- Mounting Hardware (brackets, screws, anchors)
- Instruction Manual
3. Setup and Installation
3.1 Measurement Guidelines
Accurate measurements are crucial for proper fit and function. Determine whether you will use an inside mount or an outside mount.
Inside Mount:
- Measure the exact width of the window opening at the top, middle, and bottom. Use the smallest measurement.
- Order width of smart blinds = window width. The factory will automatically deduct 1/4 inch for clearance.
- Window depth must be at least 2 inches (or 4 inches for full recess).
- Order height should be less than or equal to 72 inches.
Outside Mount:
- Measure the width of the window opening.
- Order width of smart blinds = window width + 4 inches (to ensure adequate coverage).
- Order height should be less than or equal to 72 inches.

3.2 Installation Steps
- Prepare the Mounting Location: Mark the positions for the mounting brackets according to your chosen mount type (inside or outside) and measurements. Ensure marks are level.
- Install Brackets: Drill pilot holes and secure the mounting brackets using the provided screws and anchors. Ensure brackets are firmly attached and aligned.
- Attach the Shade: Carefully lift the roller shade and snap it into the installed brackets. Ensure it is securely seated.
- Install Solar Panel: Position the solar panel on the window glass or frame where it receives maximum sunlight. Connect the solar panel cable to the charging port on the shade motor. Ensure the Type-C interface is tightly plugged in.
- Initial Charge: Although the solar panel provides continuous charging, it is recommended to fully charge the blind's internal battery via a USB charger (not included) or power bank (not included) before first use, especially if the solar panel cannot provide sufficient initial charge. The charging current should not exceed 1A.

4. Operating Instructions
4.1 Remote Control Operation
The included 1-channel remote control operates a single blind. Use the buttons to raise, lower, and stop the shade.
- Up Arrow: Raises the blind.
- Down Arrow: Lowers the blind.
- Stop Button (Circle): Stops the blind at its current position.
- Setting Buttons (+/-): Used for setting upper and lower limits (refer to advanced settings in the full manual).

4.2 Optional 15-Channel Remote Control
For controlling multiple blinds simultaneously, an optional 15-channel remote control (Model: B0CXXN5S4M) can be purchased separately. This remote allows control of up to 15 blinds.

4.3 Smart Home Integration (Optional)
To enable voice control via Amazon Alexa or Google Assistant, and app control via the Tuya app, an optional Smart Bridge/Hub (Model: B0CXXWL6FM) is required. This hub can control up to 30 blinds.
- Purchase the Smart Bridge/Hub (B0CXXWL6FM).
- Follow the instructions provided with the Smart Bridge/Hub to connect it to your home Wi-Fi network and pair it with your DENFOON blinds.
- Integrate the Tuya app with Amazon Alexa or Google Assistant for voice commands.

5. Maintenance
5.1 Cleaning
- The fabric of the roller shade is designed for spot cleaning only.
- Use a soft, damp cloth with mild soap to gently clean any soiled areas. Avoid harsh chemicals or abrasive cleaners.
- Do not immerse the shade or motor components in water.
5.2 Battery and Solar Panel
- The integrated solar panel is designed to continuously charge the internal lithium-ion battery.
- Ensure the solar panel is clean and unobstructed to maximize charging efficiency.
- If the blinds are not receiving sufficient sunlight or are used frequently, occasional charging via a USB charger (max 1A) or power bank may be necessary.
- The cordless design eliminates the need for frequent battery replacement, contributing to environmental protection.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blind does not respond to remote control. | Low battery in blind or remote; remote not paired; obstruction. | Charge the blind's battery via solar panel or USB. Check remote battery. Re-pair remote if necessary (refer to full manual for pairing instructions). Ensure no physical obstructions. |
| Blind stops mid-way or operates erratically. | Low battery; limits not set correctly. | Charge the blind's battery. Reset and re-program the upper and lower limits (refer to full manual). |
| Smart home voice control is unreliable. | Weak Wi-Fi signal; Smart Bridge/Hub connectivity issues; complex routine. | Ensure strong Wi-Fi signal to the Smart Bridge/Hub. Verify the hub is online and paired correctly. Simplify smart home routines or add multiple commands for reliability. |
| Solar panel not charging effectively. | Panel is dirty or obstructed; insufficient sunlight. | Clean the solar panel. Ensure it is positioned to receive direct sunlight for several hours daily. Consider supplementary USB charging if sunlight is consistently low. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | DENFOON |
| Model Number | bc353013-c3da-44f3-b800-f2fd57f58197 |
| Material | Polyester |
| Product Dimensions | 35"W x 72"H (for this specific variant) |
| Color | B-grey (Solar Panels Charging) |
| Opacity | Blackout |
| Operation Mode | Automatic |
| Special Feature | Blackout, Cordless, Motorized, Solar Charging |
| Included Components | Solar Panel, Remote Control |
| Compatible Devices | Amazon Alexa, Google Assistant (via optional Smart Bridge) |
| Mounting Type | Inside Mount (standard, outside mount also supported) |
| Battery | 1 Lithium Ion battery (included) |
| Product Care | Spot Clean Only |
8. Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact DENFOON customer service through the platform where the product was purchased. It is recommended to retain your purchase receipt for warranty validation.
Note: Some customer reviews indicate that support response times and warranty coverage may vary. Please refer to the specific warranty terms provided at the time of purchase.