User Manual: 5five Abana Natural Oak Effect 2 Drawer Bedside Table

Introduction

Thank you for choosing the 5five Abana Natural Oak Effect 2 Drawer Bedside Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The 5five Abana Natural Oak Effect 2 Drawer Bedside Table, showcasing its two drawers and natural oak finish.

Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Adult Assembly Required: This product requires adult assembly. Keep small parts and assembly hardware away from children.
• Use Proper Tools: Ensure you have the correct tools as specified in the assembly section.
• Stable Surface: Assemble the unit on a clean, flat, and stable surface to prevent scratching or damage.
• Do Not Over-tighten: Over-tightening screws can strip threads or crack wood.
• Weight Limit: Do not overload drawers or the top surface. Refer to specifications for weight capacities.
• Tip-Over Prevention: For safety, consider securing the unit to a wall using appropriate anti-tip hardware (not included unless specified).
• Regular Checks: Periodically check all connections and fasteners to ensure they remain tight.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Image: The product packaging box, indicating the "Abana Bedside Table" and dimensions.

List of Components:

• Side Panels (2)
• Top Panel (1)
• Bottom Panel (1)
• Back Panel (1)
• Drawer Fronts (2)
• Drawer Sides (4)
• Drawer Backs (2)
• Drawer Bottoms (2)
• Legs (4)
• Hardware Pack (screws, dowels, cam locks, drawer slides, handles)
• Assembly Instructions (this manual)

Setup and Assembly

Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.

Tools Required:

• Phillips Head Screwdriver
• Hammer (optional, for dowels)

1. Prepare Workspace: Clear a spacious, flat area. Lay out all components and hardware.
2. Attach Drawer Slides to Side Panels: Secure the drawer slides to the inner sides of the side panels using the provided screws. Ensure they are oriented correctly.
3. Assemble Drawer Boxes: Connect the drawer sides, backs, and fronts. Slide the drawer bottoms into the grooves. Attach the drawer handles to the drawer fronts.
   

   Image: The bedside table with both drawers partially pulled out, showing the internal drawer construction and slides.

4. Assemble Main Frame: Connect the side panels to the top and bottom panels using dowels and cam locks/screws. Ensure all connections are secure.
5. Attach Back Panel: Secure the back panel to the assembled frame using small nails or screws.
6. Install Legs: Attach the four pine wood legs to the bottom of the bedside table using the designated screws. Ensure they are firmly tightened.
7. Insert Drawers: Carefully slide the assembled drawers onto the installed drawer slides. The soft-close mechanism should engage smoothly.
   

   Image: A close-up view of the bedside table's drawers, highlighting the soft-close feature with an accompanying icon.

8. Final Check: Ensure all screws are tightened and the table is stable.

Operating and Usage

The 5five Abana Bedside Table is designed for use as a nightstand or side table. Its two drawers provide convenient storage for personal items.

• Drawer Operation: The drawers feature a soft-close mechanism for quiet and smooth operation. Gently push the drawer to close it completely.
• Placement: Position the bedside table on a flat, level surface to ensure stability.
• Recommended Use: Ideal for holding lamps, books, alarm clocks, and other bedside essentials.

Image: A lifestyle shot showing the bedside table as part of a complete furniture set in a room, demonstrating its intended use.

Maintenance

Proper care will extend the life and appearance of your bedside table.

• Cleaning: Wipe with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or water damage.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the oak effect finish.
• Heat and Moisture: Do not place hot items directly on the surface. Use coasters or protective pads. Avoid excessive moisture.
• Hardware Check: Periodically check and re-tighten all screws and fasteners to ensure the table remains sturdy.

Troubleshooting

If you encounter issues during assembly or use, refer to the following common problems and solutions:

Specifications

Warranty and Support

This product comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the manufacturer directly.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact 5 five simply smart customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.

Manufacturer: 5 five simply smart

Website: www.5five.com (as seen on packaging image)