Introduction
Thank you for choosing the Brendz LED Cabinet Light. This product is designed to provide versatile and convenient lighting for various indoor spaces such as cabinets, closets, hallways, and garages. Featuring a motion sensor, USB-C recharging, and adjustable color temperatures, it offers an efficient and adaptable lighting solution. Please read this manual thoroughly before use to ensure proper installation and operation.
Safety Instructions
- Do not expose the device to water or excessive moisture.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Keep away from high temperatures and direct sunlight.
- Use only the provided USB-C cable for charging.
- This light is intended for indoor use only.
- The light is not designed to replace main lighting but for short-duration illumination in specific areas.
Package Contents
- 2 x Brendz Puyo LED Cabinet Lights (40cm, Silver)
- 2 x USB-C Charging Cables (25cm)
- Mounting Material (Metal plates with 3M adhesive)
- User Manual
Product Overview
The Brendz LED Cabinet Light features a sleek aluminum body, an integrated PIR motion sensor, and a multi-function button for control. It is designed for easy installation and flexible use.
Figure 1: Detailed view of the light's features, including the USB-C charging port, LED charging indicator (red/green), and the ON-OFF-AUTO switch. The light has an ultra-thin 10mm aluminum body.
Setup and Installation
1. Charging the Device
Before first use, fully charge the LED cabinet light. Connect the provided USB-C cable to the light's charging port and to a standard USB power adapter (not included). The charging indicator LED will illuminate red during charging and turn green when fully charged. A full charge takes approximately 6 hours.
2. Mounting the Light
The Brendz LED Cabinet Light features built-in magnets for easy installation. It comes with metal plates and 3M self-adhesive tape for mounting on non-magnetic surfaces.
- Prepare the Surface: Clean and dry the desired mounting surface to ensure optimal adhesion.
- Attach Metal Plates: Peel off the protective film from the 3M adhesive on the metal plates. Firmly press the metal plates onto the cleaned surface at the desired location.
- Mount the Light: The light will magnetically attach to the installed metal plates. Ensure it is securely fastened.
Figure 2: Illustration of the easy installation process using the included metal plates and 3M self-adhesive tape, allowing the light to attach magnetically.
Operating Instructions
The light features a multi-function button and a 3-position switch (ON-OFF-AUTO) for various operating modes.
Figure 3: The single control button allows for stepless dimming (long press) and changing color temperature (single press).
1. Power Modes (ON-OFF-AUTO Switch)
- ON: The light will remain continuously on.
- OFF: The light will be turned off.
- AUTO: The light will activate when motion is detected in a dark environment. It will turn off automatically after 25 seconds if no further motion is detected.
Figure 4: The PIR motion sensor detects movement within a 120-degree angle up to 3 meters, activating the light in AUTO mode.
2. Adjusting Color Temperature
With the light turned ON (either in ON mode or after activation in AUTO mode), press the control button once to cycle through the three available color temperatures:
- 6000K Cold White
- 4000K Neutral White
- 3000K Warm White
Figure 5: The light offers three distinct color temperatures to suit different preferences and environments.
3. Stepless Dimming
To adjust the brightness, press and hold the control button. The light intensity will smoothly change between 10% (15 lumens) and 100% (150 lumens). Release the button when the desired brightness is reached. The light features a memory function that recalls the last brightness setting when turned on again.
Figure 6: The stepless dimming feature allows for precise brightness adjustment from 10% to 100% output.
Battery and Charging
The Brendz LED Cabinet Light is equipped with an integrated 1100 mAh polymer lithium battery, providing reliable performance.
- Charging Time: Approximately 6 hours for a full charge.
- Battery Life: Up to 10 hours in continuous ON mode, or up to 1500 activations in AUTO (motion sensor) mode on a full charge.
Figure 7: Battery performance details, highlighting the long operational time and charging duration.
Maintenance
- Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing for an extended period, charge the battery fully every 3-6 months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light using the USB-C cable. |
| Motion sensor not working. | Light is not in AUTO mode. | Ensure the switch is set to AUTO. |
| Motion sensor activates too frequently or not at all. | Sensor obstructed or placed in an area with constant movement/light. | Ensure the sensor is clear. Reposition the light to an area with less ambient light or less frequent, unwanted motion. |
| Light flickers or dims unexpectedly. | Low battery. | Recharge the light. |
| Cannot change color temperature or brightness. | Incorrect operation. | Ensure the light is ON. Press the button briefly to change color temperature. Press and hold the button for stepless dimming. |
Specifications
| Feature | Specification |
|---|---|
| Brand | Brendz |
| Model Number | CL5001A |
| Dimensions (L x W x H) | 40.5 x 4.5 x 1.7 cm |
| Weight | 360 g |
| Battery | 1100 mAh Lithium Polymer (included) |
| Input Voltage | 5 Volts (DC) |
| Light Source | LED (78 LEDs) |
| Luminous Flux | 150 lumens (max) |
| Color Temperatures | 3000K (Warm White), 4000K (Neutral White), 6000K (Cold White) |
| Dimming | Stepless (10% - 100%) |
| Motion Sensor | PIR, 120° detection angle, up to 3m range |
| Installation Type | Magnetic |
| Material | Aluminum |
Warranty and Support
Brendz products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.